G.  Fantoni, Tilli, J., Belo, F. A. W., and Ishak, R., ?Shaping of foam-like materials through the use of a sonotrode?, in  International Conference On Innovative Design And Manufacturing, Montreal, Quebec, Canada, August 13-15, 2014. 

F. A. W.  Belo, Salaris, P., Fontanelli, D., and Bicchi, A., ?A Complete Observability Analysis  of the Planar Bearing Localization and Mapping for Visual Servoing with Known Camera Velocities?, International Journal of Advanced Robotic Systems, vol. 10, no. 197, 2013 [Online]. Available: http://www.intechopen.com/books/international_journal_of_advanced_robotic_systems/a-complete-observability-analysis-of-the-planar-bearing-localization-and-mapping-for-visual-servoing

M.  Garabini, Passaglia, A., Belo, F. A. W., Salaris, P., and Bicchi, A., ?Optimality Principles in Stiffness Control: The VSA Kick?, in International Conference of Robotics and Automation - ICRA 2012, Saint Paul, MN, USA, 2012, pp. 3341 - 3346 . 

L.  Balletti, Rocchi, A., Belo, F. A. W., Catalano, M. G., Garabini, M., Grioli, G., and Bicchi, A., ?Towards variable impedance assembly: the VSA peg-in-hole?, in IEEE-RAS International Conference on Humanoid Robots, Osaka, Japan, 2012. 

M. G.  Catalano, Grioli, G., Garabini, M., Belo, F. A. W., Di Basco, A., Tsagarakis, N. G., and Bicchi, A., ?A Variable Damping module for Variable Impedance Actuation?, in International Conference of Robotics and Automation - ICRA 2012, Saint Paul, MN, USA, 2012, pp. 2666 - 2672. 

M.  Garabini, Passaglia, A., Belo, F. A. W., Salaris, P., and Bicchi, A., ?Optimality Principles in Variable Stiffness Control: the VSA Hammer?, in 2011 IEEE/RSJ International Conference on Intelligent RObots and Systems, S. Francisco, USA, 2011, pp. 3770 - 3775. 

G.  Grioli, Catalano, M. G., Garabini, M., Bonomo, F., Serio, A., Salaris, P., Belo, F. A. W., Mancini, M., Bicchi, A., and Passaglia, A., ?Variable stiffness actuators: muscles for the next generation of robots?, in Automatica.it 2011, Pisa, Italy, 2011. 

F. A. W.  Belo, Salaris, P., and Bicchi, A., ?3 known landmarks are enough for solving planar bearing SLAM and fully reconstruct unknown inputs?, in Intelligent Robots and Systems (IROS), 2010 IEEE/RSJ International Conference on, St. Louis MO USA, 2010, pp. 2539 -2545. 

A.  Fagiolini, Belo, F. A. W., Catalano, M. G., Alicino, S., Bonomo, F., and Bicchi, A., ?Design and Control of a Novel 3D Casting Manipulator?, in IEEE International Conference on Robotics and Automation (ICRA2010), Anchorage, Alaska, 2010, pp. 4169 - 4174. 

D.  Fontanelli, Salaris, P., Belo, F. A. W., and Bicchi, A., ?Visual Servoing via Advanced Numerical Methods?, vol. 401, G.  Chesi and Hashimoto, K., Eds. Springer, 2010, pp. 335 - 360. 

S.  Alicino, Catalano, M. G., Bonomo, F., Belo, F. A. W., Grioli, G., Schiavi, R., Fagiolini, A., and Bicchi, A., ?A Rough-Terrain, Casting Robot for the ESA Lunar Robotics Challenge?, in Proc. IEEE/RSJ International Conference on Intelligent RObots and Systems, St. Louis MO USA, 2009, pp. 3336-3342. 

D.  Fontanelli, Salaris, P., Belo, F. A. W., and Bicchi, A., ?Visual appearance mapping for optimal vision based servoing?, vol. 54 - Experimental Robotics, B.  Siciliano, Khatib, O., and Groen, F., Eds. Springer, 2009, pp. 353 - 362. 

D.  Fontanelli, Danesi, A., Belo, F. A. W., Salaris, P., and Bicchi, A., ?Visual Servoing in the Large?, International Journal of Robotics Research, vol. 28, pp. 802 - 814, 2009. 

P.  Salaris, Belo, F. A. W., Fontanelli, D., Greco, L., and Bicchi, A., ?Optimal Paths in a Constrained Image Plane for Purely Image-Based Parking?, in IROS, 2008, pp. 1673-1680. 

P.  Salaris, Belo, F. A. W., Fontanelli, D., and Bicchi, A., ?Visual SLAM for Servoing for Appearance Based Topological Maps?, in Proc. Ints. Symp. Experimental Robotics, 2008, vol. 39/2008, pp. 277-286.