TY - JOUR T1 - Humanoids at Work: The WALK-MAN Robot in a Postearthquake Scenario JF - IEEE Robotics Automation Magazine Y1 - 2018 A1 - F. Negrello A1 - A Settimi A1 - D. Caporale A1 - G. Lentini A1 - M. Poggiani A1 - D. Kanoulas A1 - L. Muratore A1 - Luberto, E. A1 - G. Santaera A1 - L. Ciarleglio A1 - L. Ermini A1 - L. Pallottino A1 - D. G. Caldwell A1 - N. Tsagarakis A1 - A. Bicchi A1 - M. Garabini A1 - M. G. Catalano KW - Buildings KW - Earthquakes KW - Hardware KW - Legged locomotion KW - Robot sensing systems KW - Task analysis ER - TY - CHAP T1 - WALK-MAN Humanoid Platform T2 - The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue Y1 - 2018 A1 - N. G. Tsagarakis A1 - F. Negrello A1 - M. Garabini A1 - W. Choi A1 - L. Baccelliere A1 - V. G. Loc A1 - J. Noorden A1 - M. G. Catalano A1 - M. Ferrati A1 - L. Muratore A1 - P. Kryczka A1 - E. Mingo Hoffman A1 - A Settimi A1 - A. Rocchi A1 - A. Margan A1 - S. Cordasco A1 - D. Kanoulas A1 - A. Cardellino A1 - L. Natale A1 - H. Dallali A1 - J. Malzahn A1 - N. Kashiri A1 - V. Varricchio A1 - L. Pallottino A1 - C. Pavan A1 - J. Lee A1 - A. Ajoudani A1 - D. G. Caldwell A1 - A. Bicchi JF - The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue PB - Springer VL - 121 ER - TY - CONF T1 - Design and characterization of a novel high-compliance spring for robots with soft joints T2 - IEEE International Conference on Advanced Intelligent Mechatronics (AIM) Y1 - 2017 A1 - F. Negrello A1 - M. G. Catalano A1 - M. Garabini A1 - M. Poggiani A1 - D. G. Caldwell A1 - N. G. Tsagarakis A1 - A. Bicchi KW - Robotics AB -

Low stiffness elements have a number of applications in Soft Robotics, from Series Elastic Actuators (SEA) to torque sensors for compliant systems. In its general formulation, the design problem of elastic components is complex and depends on several variables: material properties, load range, shape factor and size constraints. Consequently, most of the spring designs presented in literature are based on heuristics or are optimized for specific working conditions. This work presents the design study and characterization of a scalable spoked elastic element with hinge tip constraints. We compared the proposed design with three existing spring principles, showing that the spoked solution is the convenient option for low-stiffness and low shape factor elastic elements. Therefore, a design analysis on the main scaling parameters of the spoked spring, namely number of spokes and type of constraints, is presented. Finally, an experimental characterization has been conducted on physical prototypes. The agreement among simulations and experimental results demonstrates the effectiveness of the proposed concept.

JF - IEEE International Conference on Advanced Intelligent Mechatronics (AIM) PB - IEEE CY - Munich, Germany, 3-7 July 2017 UR - http://ieeexplore.ieee.org/document/8014029/ ER - TY - JOUR T1 - An Integrated Approach to Characterize the Behavior of a Human Fingertip in Contact with a Silica Window JF - IEEE Transactions on Haptics Y1 - 2017 A1 - M. L. D'Angelo A1 - F. Cannella A1 - M. Bianchi A1 - M. D'Imperio A1 - E. Battaglia A1 - M. Poggiani A1 - G. Rossi A1 - A. Bicchi A1 - D. G. Caldwell KW - Haptics KW - Robotics AB -

Understanding the mechanisms of human tactual perception represents a challenging task in haptics and humanoid robotics. A classic approach to tackle this issue is to accurately and exhaustively characterize the mechanical behavior of human fingertip. The output of this characterization can then be exploited to drive the design of numerical models, which can be used to investigate in depth the mechanisms of human sensing. In this work, we present a novel integrated measurement technique and experimental set up for in vivo characterization of the deformation of the human fingertip at contact, in terms of contact area, force, deformation, and pressure distribution. The device presented here compresses the participant's fingertip against a flat surface, while the aforementioned measurements are acquired and experimental parameters such as velocity, finger orientation, and displacement (indentation) controlled. Experimental outcomes are then compared and integrated with the output of a 3D finite element (FE) model of the human fingertip, built upon existing validated models. The agreement between numerical and experimental data represents a validation for our approach.

VL - 10 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7579582 IS - 1 ER - TY - JOUR T1 - WALK-MAN: A High-Performance Humanoid Platform for Realistic Environments JF - Journal of Field Robotics Y1 - 2017 A1 - N. G. Tsagarakis A1 - D. G. Caldwell A1 - F. Negrello A1 - W. Choi A1 - L. Baccelliere A1 - V. G. Loc A1 - J. Noorden A1 - L. Muratore A1 - A. Margan A1 - A. Cardellino A1 - L. Natale A1 - E. Mingo Hoffman A1 - H. Dallali A1 - N. Kashiri A1 - J. Malzahn A1 - J. Lee A1 - P. Kryczka A1 - D. Kanoulas A1 - M. Garabini A1 - M. G. Catalano A1 - M. Ferrati A1 - V. Varricchio A1 - L. Pallottino A1 - C. Pavan A1 - A. Bicchi A1 - A Settimi A1 - A. Rocchi A1 - A. Ajoudani KW - Robotics AB -

In this work, we present WALK-MAN, a humanoid platform that has been developed to operate in realistic unstructured environment, and demonstrate new skills including powerful manipulation, robust balanced locomotion, high-strength capabilities, and physical sturdiness. To enable these capabilities, WALK-MAN design and actuation are based on the most recent advancements of series elastic actuator drives with unique performance features that differentiate the robot from previous state-of-the-art compliant actuated robots. Physical interaction performance is benefited by both active and passive adaptation, thanks to WALK-MAN actuation that combines customized high-performance modules with tuned torque/velocity curves and transmission elasticity for high-speed adaptation response and motion reactions to disturbances. WALK-MAN design also includes innovative design optimization features that consider the selection of kinematic structure and the placement of the actuators with the body structure to maximize the robot performance. Physical robustness is ensured with the integration of elastic transmission, proprioceptive sensing, and control. The WALK-MAN hardware was designed and built in 11 months, and the prototype of the robot was ready four months before DARPA Robotics Challenge (DRC) Finals. The motion generation of WALK-MAN is based on the unified motion-generation framework of whole-body locomotion and manipulation (termed loco-manipulation). WALK-MAN is able to execute simple loco-manipulation behaviors synthesized by combining different primitives defining the behavior of the center of gravity, the motion of the hands, legs, and head, the body attitude and posture, and the constrained body parts such as joint limits and contacts. The motion-generation framework including the specific motion modules and software architecture is discussed in detail. A rich perception system allows the robot to perceive and generate 3D representations of the environment as well as detect contacts and sense physical interaction force and moments. The operator station that pilots use to control the robot provides a rich pilot interface with different control modes and a number of teleoperated or semiautonomous command features. The capability of the robot and the performance of the individual motion control and perception modules were validated during the DRC in which the robot was able to demonstrate exceptional physical resilience and execute some of the tasks during the competition.

VL - 34 UR - http://onlinelibrary.wiley.com/doi/10.1002/rob.21702/epdf IS - 4 ER - TY - CONF T1 - A Modular Compliant Actuator for Emerging High Performance and Fall-Resilient Humanoids T2 - 15th IEEE RAS Humanoids Conference (HUMANOIDS2015) Y1 - 2016 A1 - F. Negrello A1 - M. Garabini A1 - M. G. Catalano A1 - J. Malzahn A1 - D. G. Caldwell A1 - A. Bicchi A1 - N. G. Tsagarakis KW - Robotics JF - 15th IEEE RAS Humanoids Conference (HUMANOIDS2015) PB - IEEE UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7363567 N1 -

This work is supported by the WALK-MAN FP7-ICT-2013-10 European Commission project.

ER - TY - JOUR T1 - Variable Stiffness Actuators: Review on Design and Components JF - IEEE/ASME Transactions on Mechatronics Y1 - 2016 A1 - S. Wolf A1 - G. Grioli A1 - O. Eiberger A1 - W. Friedl A1 - M. Grebenstein A1 - H. Hoppner A1 - E. Burdet A1 - D. G. Caldwell A1 - R. Carloni A1 - M. G. Catalano A1 - D. Lefeber A1 - S. Stramigioli A1 - N. G. Tsagarakis A1 - M. Van Damme A1 - R. Van Ham A1 - B. Vanderborght A1 - L. C. Visser A1 - A. Bicchi A1 - A Albu-Schaeffer KW - Robotics AB -

Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.

VL - 21 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7330025 IS - 5 ER - TY - CONF T1 - WALK-MAN humanoid lower body design optimization for enhanced physical performance T2 - IEEE International Conference of Robotics and Automation (ICRA2016) Y1 - 2016 A1 - F. Negrello A1 - M. Garabini A1 - M. G. Catalano A1 - P. Kryczka A1 - W. Choi A1 - D. G. Caldwell A1 - A. Bicchi A1 - N. G. Tsagarakis KW - Robotics AB -
The deployment of robots to assist in environments hostile for humans during emergency scenarios require robots to demonstrate enhanced physical performance, that includes adequate power, adaptability and robustness to physical interactions and efficient operation. This work presents the design and development of the lower body of the new high performance humanoid WALK-MAN, a robot developed recently to assist in disaster response scenarios. The paper introduces the details of the WALK-MAN lower-body, highlighting the innovative design optimization features considered to maximize the leg performance. Starting from the general lower body specifications the objectives of the design and how they were addressed are introduced, including the selection of the leg kinematics, the arrangement of the actuators and their integration with the leg structure to maximize the range of motion, reduce the leg mass and inertia, and shape the leg mass distribution for better dynamic performance. Physical robustness is ensured with the integration of elastic transmission and impact energy absorbing covers. Experimental walking trials demonstrate the correct operation of the legs while executing a walking gait.
JF - IEEE International Conference of Robotics and Automation (ICRA2016) PB - IEEE CY - Stockholm, Sweden, May 16-21, 2016 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7487327 ER - TY - CONF T1 - Characterization of Nonlinear Finger Pad Mechanics for Tactile Rendering T2 - IEEE World Haptics Conference Y1 - 2015 A1 - E. Miguel A1 - M. L. D'Angelo A1 - F. Cannella A1 - M. Bianchi A1 - M Memeo A1 - A. Bicchi A1 - D. G. Caldwell A1 - M. A. Otaduy KW - Haptics KW - Robotics AB -

The computation of skin forces and deformations for tactile rendering requires an accurate model of the extremely nonlinear behavior of the skin. In this work, we investigate the characterization of fingermechanics with the goal of designing accurate nonlinear models for tactile rendering. First, we describe a measurement setup that enables the acquisition of contact force and contact area in the context of controlled finger indentation experiments. Second, we describe an optimization procedure that estimates the parameters of strain-limiting deformation models that match best the acquired data. We show that the acquisition setup allows the measurement of force and area information with high repeatability, and the estimation method reaches nonlinear models that match the measured data with high accuracy.

JF - IEEE World Haptics Conference CY - Chicago, USA, 22-25 June 2015 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7177692 N1 -

softhands, werahap

ER - TY - CONF T1 - Kinematic Analysis and Design Considerations for Optimal Base Frame Arrangement of Humanoid Shoulders T2 - IEEE International Conference on Robotics and Automation (ICRA2015) Y1 - 2015 A1 - M. Bagheri A1 - A. Ajoudani A1 - J. Lee A1 - D. G. Caldwell A1 - N G Tsagarakis KW - Robotics JF - IEEE International Conference on Robotics and Automation (ICRA2015) CY - Seattle, USA, 25 - 30 May U1 -

walkman

ER - TY - JOUR T1 - Variable Stiffness Actuators: the user’s point of view JF - Int. J. Robotics Research Y1 - 2015 A1 - G. Grioli A1 - S. Wolf A1 - M. Garabini A1 - M. G. Catalano A1 - E. Burdet A1 - D. G. Caldwell A1 - R. Carloni A1 - W. Friedl A1 - M. Grebenstein A1 - M. Laffranchi A1 - D. Lefeber A1 - S. Stramigioli A1 - N G Tsagarakis A1 - M. Van Damme A1 - B. Vanderborght A1 - A Albu-Schaeffer A1 - A. Bicchi KW - Robotics VL - 34 UR - http://ijr.sagepub.com/cgi/reprint/0278364914566515v1.pdf?ijkey=anmgudvoLz7ZloP&keytype=finite IS - 6 N1 -

Extensions.zip

ER - TY - CHAP T1 - HANDS.DVI: A DeVice-Independent programming and control framework for robotic HANDS T2 - Gearing up and accelerating cross-fertilization between academic and industrial robotics research in Europe - Technology transfer experiments from the ECHORD project Y1 - 2014 A1 - G. Salvietti A1 - G. Gioioso A1 - M. Malvezzi A1 - D Prattichizzo A1 - A. Serio A1 - E. Farnioli A1 - M Gabiccini A1 - A. Bicchi A1 - I. Sarakoglou A1 - N G Tsagarakis A1 - D. G. Caldwell KW - Haptics KW - Robotics AB -

The scientific goal of HANDS.DVI consists of developing a common
framework to programming robotic hands independently from their kinematics,
mechanical construction, and sensor equipment complexity. Recent results on the
organization of the human hand in grasping and manipulation are the inspiration
for this experiment. The reduced set of parameters that we effectively use to control
our hands is known in the literature as the set of synergies. The synergistic
organization of the human hand is the theoretical foundation of the innovative approach
to design a unified framework for robotic hands control. Theoretical tools
have been studied to design a suitable mapping function of the control action (decomposed
in its elemental action) from a human hand model domain onto the
articulated robotic hand co-domain. The developed control framework has been
applied on an experimental set up consisting of two robotic hands with dissimilar
kinematics grasping an object instrumented with force sensors.

JF - Gearing up and accelerating cross-fertilization between academic and industrial robotics research in Europe - Technology transfer experiments from the ECHORD project VL - 94 ER - TY - CONF T1 - Haptic Exploration of Unknown Surfaces with Discontinuities T2 - Proc. IEEE/RSJ Intl Conf. on Intelligent Robots and Systems (IROS 2014) Y1 - 2014 A1 - Jamisola, R. S. A1 - Kormushev, P. A1 - A. Bicchi A1 - D. G. Caldwell KW - Haptics KW - Robotics JF - Proc. IEEE/RSJ Intl Conf. on Intelligent Robots and Systems (IROS 2014) CY - Chicago, USA UR - http://kormushev.com/papers/Jamisola_IROS-2014.pdf ER - TY - CONF T1 - Manipulation Framework for Compliant Humanoid COMAN: Application to a Valve Turning Task T2 - IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014) Y1 - 2014 A1 - A. Ajoudani A1 - J. Lee A1 - A. Rocchi A1 - M. Ferrati A1 - E. Mingo Hoffman A1 - A Settimi A1 - D. G. Caldwell A1 - A. Bicchi A1 - N G Tsagarakis KW - Haptics KW - Robotics AB -

With the purpose of achieving a desired interaction performance for our compliant humanoid robot (COMAN), in this paper we propose a semi-autonomous control framework and evaluate it experimentally in a valve turning setup. The control structure consists of various modules and interfaces to identify the valve, locate the robot in front of it and perform the manipulation. The manipulation module implements four motion primitives (Reach, Grasp, Rotate and Disengage) and realizes the corresponding desired impedance profile for each phase to accomplish the task. In this direction, to establish a stable and compliant contact between the valve and the robot hands, while being able to generate the sufficient rotational torques depending on the valve's friction, Rotate incorporates a novel dual-arm impedance control technique to plan and realize a task-appropriate impedance profile. Results of the implementation of the proposed control framework are firstly evaluated in simulation studies using Gazebo. Subsequent experimental results highlight the efficiency of the proposed impedance planning and control in generation of the required interaction forces to accomplish the task.

JF - IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014) PB - IEEE CY - Madrid, Spain, November 18 - 20 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7041434 ER - TY - CONF T1 - Upper-body Impedance Control with an Intuitive Stiffness Emulation for a Door Opening Task T2 - IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014) Y1 - 2014 A1 - J. Lee A1 - A. Ajoudani A1 - E. Mingo Hoffman A1 - A. Rocchi A1 - A Settimi A1 - M. Ferrati A1 - A. Bicchi A1 - N G Tsagarakis A1 - D. G. Caldwell KW - Robotics AB -

The advent of humanoids has brought new challenges in the real-world application. As a part of ongoing efforts to foster functionality of the robot accommodating a real environment, this paper introduces a recent progress on a door opening task with our compliant humanoid, CoMan. We presents a task-prioritized impedance control framework for an upper body system that includes a dual-arm, a waist, two soft hands, and 3D camera. Aimed to create desired responses to open the door, a novel stiffness modulation method is proposed, incorporating a realtime optimization. As a preliminary experiment, a full door-opening scenario (approaching to the door and reaching, grasping, rotating and pulling the door handle) is demonstrated under a semi-autonomous operation with a pilot. The experimental result shows the effectiveness and efficacy of the proposed impedance control approach. Despite of uncertainties from sensory data, the door opening task is successfully achieved and safe and robust interaction is established without creating excessive forces.

JF - IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014) PB - IEEE CY - Madrid, Spain, November 18 - 20 UR - http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7041441 ER - TY - CONF T1 - Optimal Control for Maximizing Velocity of the CompActTM Compliant Actuator T2 - IEEE International Conference on Robotics and Automation (ICRA2013) Y1 - 2013 A1 - L. Chen A1 - M. Garabini A1 - M. Laffranchi A1 - N. Kashiri A1 - N G Tsagarakis A1 - A. Bicchi A1 - D. G. Caldwell KW - Robotics JF - IEEE International Conference on Robotics and Automation (ICRA2013) UR - 10.1109/ICRA.2013.6630623 ER - TY - CONF T1 - Tele-Impedance based Stiffness and Motion Augmentation for a Knee Exoskeleton Device T2 - IEEE International Conference on Robotics and Automation (ICRA2013) Y1 - 2013 A1 - N. Karavas A1 - A. Ajoudani A1 - N G Tsagarakis A1 - J. Saglia A1 - A. Bicchi A1 - D. G. Caldwell KW - Robotics JF - IEEE International Conference on Robotics and Automation (ICRA2013) UR - 10.1109/ICRA.2013.6630872 ER - TY - JOUR T1 - Variable Impedance Actuators: a Review JF - Robotics and Autonomous Systems Y1 - 2013 A1 - B. Vanderborght A1 - A Albu-Schaeffer A1 - A. Bicchi A1 - E. Burdet A1 - D. G. Caldwell A1 - R. Carloni A1 - M. G. Catalano A1 - O. Eiberger A1 - W. Friedl A1 - G. Ganesh A1 - M. Garabini A1 - M. Grebenstein A1 - G. Grioli A1 - S. Haddadin A1 - H. Hoppner A1 - A. Jafari A1 - M. Laffranchi A1 - D. Lefeber A1 - F. Petit A1 - S. Stramigioli A1 - N G Tsagarakis A1 - M. Van Damme A1 - R. Van Ham A1 - L. C. Visser A1 - S. Wolf KW - Robotics KW - Soft robotics KW - Variable Impedance Actuators AB -

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA’s to be guided in the design and implementation process for their targeted application.

VL - 61 UR - http://www.sciencedirect.com/science/article/pii/S0921889013001188 IS - 12 N1 -

Available online 6 August 2013

ER - TY - ADVS T1 - Variable Impedance Actuators: Moving the Robots of Tomorrow Y1 - 2012 A1 - B. Vanderborght A1 - A Albu-Schaeffer A1 - A. Bicchi A1 - E. Burdet A1 - D. G. Caldwell A1 - R. Carloni A1 - M. G. Catalano A1 - G. Ganesh A1 - M. Garabini A1 - G. Grioli A1 - S. Haddadin A1 - A. Jafari A1 - M. Laffranchi A1 - D. Lefeber A1 - F. Petit A1 - S. Stramigioli A1 - N G Tsagarakis A1 - M. Van Damme A1 - R. Van Ham A1 - L. C. Visser A1 - S. Wolf KW - Robotics JF - International Conference of Intelligent Robots and Systems - IROS 2012- Best Jubilee Video Award ER -