@article {4205, title = {A wearable wrist haptic display for motion tracking and force feedback in the operational space}, journal = {Wearable Technologies}, volume = {2}, year = {2021}, author = {Laghi, Marco and Catalano, Manuel G and Grioli, Giorgio and Bicchi, Antonio} } @article {4271, title = {WRAPP-up: A Dual-Arm Robot for Intralogistics}, journal = {IEEE Robotics Automation Magazine}, volume = {28}, year = {2021}, pages = {50-66}, abstract = {

The diffusion of e-commerce has produced larger and larger volumes of varying items to be handled in warehouses, with the effect that the need for picking automation is increasing. Conventionally, automation has been achieved through a custom plant designed for large-scale production of items having well-established characteristics that are expected to change slowly and to only a small degree over time. However, today the challenge is to realize a solution that is flexible enough to handle goods with different shapes, sizes, and physical properties and that require different grasping modes. To solve this problem, we first analyzed how humans perform picking and then synthesized their behavior according to four main tactics. These were then used as guidelines for the design, planning, and control of WRAPP-up, a dual-arm robot composed of two anthropomorphic manipulators: a Pisa/IIT SoftHand and a velvet tray (Figure 1). The system has been validated and evaluated through extensive experimental tests.

}, doi = {10.1109/MRA.2020.3015899}, url = {https://ieeexplore.ieee.org/document/9212558?fbclid=IwAR05rgEATvdOFrtQWMrNKMrGHGfvtKE4MEKcj3i9pb6KAI4XTdhMqaq7MNc}, author = {Garabini, Manolo and Caporale, Danilo and Tincani, Vinicio and Palleschi, Alessandro and Gabellieri, Chiara and Gugliotta, Marco and Settimi, Alessandro and Catalano, Manuel Giuseppe and Grioli, Giorgio and Pallottino, Lucia} } @article {3655, title = {Wearable haptic interfaces for applications in gynecologic robotic surgery: a proof of concept in robotic myomectomy.}, journal = {Journal of Robotic Surgery }, year = {2019}, author = {A. Giannini and M. Bianchi and D. Doria and S. Fani and M. Caretto and A. Bicchi and T. Simoncini} } @inbook {3381, title = {WALK-MAN Humanoid Platform}, booktitle = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, volume = {121}, number = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, year = {2018}, pages = {495{\textendash}548}, publisher = {Springer}, organization = {Springer}, doi = {10.1007/978-3-319-74666-1_13}, author = {N. G. Tsagarakis and F. Negrello and M. Garabini and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and M. G. Catalano and M. Ferrati and L. Muratore and P. Kryczka and E. Mingo Hoffman and A Settimi and A. Rocchi and A. Margan and S. Cordasco and D. Kanoulas and A. Cardellino and L. Natale and H. Dallali and J. Malzahn and N. Kashiri and V. Varricchio and L. Pallottino and C. Pavan and J. Lee and A. Ajoudani and D. G. Caldwell and A. Bicchi} } @article {3217, title = {W-FYD: a Wearable Fabric-based Display for Haptic Multi-Cue Delivery and Tactile Augmented Reality}, journal = {IEEE Transactions on Haptics}, volume = {11}, year = {2018}, pages = {304 - 316}, chapter = {304}, abstract = {

Despite the importance of softness, there is no evidence of wearable haptic systems able to deliver controllable softness cues. Here, we present the Wearable Fabric Yielding Display (W-FYD), a fabric-based display for multi-cue delivery that can be worn on user{\textquoteright}s finger and enables, for the first time, both active and passive softness exploration. It can also induce a sliding effect under the finger-pad. A given stiffness profile can be obtained by modulating the stretching state of the fabric through two motors. Furthermore, a lifting mechanism allows to put the fabric in contact with the user{\textquoteright}s finger-pad, to enable passive softness rendering. In this paper, we describe the architecture of W-FYD, and a thorough characterization of its stiffness workspace, frequency response and softness rendering capabilities. We also computed device Just Noticeable Difference in both active and passive exploratory conditions, for linear and non-linear stiffness rendering as well as for sliding direction perception. The effect of device weight was also considered. Furthermore, performance of participants and their subjective quantitative evaluation in detecting sliding direction and softness discrimination tasks are reported. Finally, applications of W-FYD in tactile augmented reality for open palpation are discussed, opening interesting perspectives in many fields of human-machine interaction.

}, keywords = {Haptics, Robotics}, issn = {1939-1412}, doi = {10.1109/TOH.2017.2708717}, url = {http://ieeexplore.ieee.org/document/8003491/}, author = {S. Fani and S. Ciotti and E. Battaglia and A. Moscatelli and M. Bianchi} } @article {3137, title = {WALK-MAN: A High-Performance Humanoid Platform for Realistic Environments}, journal = {Journal of Field Robotics}, volume = {34}, year = {2017}, month = {06/2017}, pages = {1 - 34}, abstract = {

In this work, we present WALK-MAN, a humanoid platform that has been developed to operate in realistic unstructured environment, and demonstrate new skills including powerful manipulation, robust balanced locomotion, high-strength capabilities, and physical sturdiness. To enable these capabilities, WALK-MAN design and actuation are based on the most recent advancements of series elastic actuator drives with unique performance features that differentiate the robot from previous state-of-the-art compliant actuated robots. Physical interaction performance is benefited by both active and passive adaptation, thanks to WALK-MAN actuation that combines customized high-performance modules with tuned torque/velocity curves and transmission elasticity for high-speed adaptation response and motion reactions to disturbances. WALK-MAN design also includes innovative design optimization features that consider the selection of kinematic structure and the placement of the actuators with the body structure to maximize the robot performance. Physical robustness is ensured with the integration of elastic transmission, proprioceptive sensing, and control. The WALK-MAN hardware was designed and built in 11 months, and the prototype of the robot was ready four months before DARPA Robotics Challenge (DRC) Finals. The motion generation of WALK-MAN is based on the unified motion-generation framework of whole-body locomotion and manipulation (termed loco-manipulation). WALK-MAN is able to execute simple loco-manipulation behaviors synthesized by combining different primitives defining the behavior of the center of gravity, the motion of the hands, legs, and head, the body attitude and posture, and the constrained body parts such as joint limits and contacts. The motion-generation framework including the specific motion modules and software architecture is discussed in detail. A rich perception system allows the robot to perceive and generate 3D representations of the environment as well as detect contacts and sense physical interaction force and moments. The operator station that pilots use to control the robot provides a rich pilot interface with different control modes and a number of teleoperated or semiautonomous command features. The capability of the robot and the performance of the individual motion control and perception modules were validated during the DRC in which the robot was able to demonstrate exceptional physical resilience and execute some of the tasks during the competition.

}, keywords = {Robotics}, issn = {1556-4967}, doi = {10.1002/rob.21702}, url = {http://onlinelibrary.wiley.com/doi/10.1002/rob.21702/epdf}, author = {N. G. Tsagarakis and D. G. Caldwell and F. Negrello and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and L. Muratore and A. Margan and A. Cardellino and L. Natale and E. Mingo Hoffman and H. Dallali and N. Kashiri and J. Malzahn and J. Lee and P. Kryczka and D. Kanoulas and M. Garabini and M. G. Catalano and M. Ferrati and V. Varricchio and L. Pallottino and C. Pavan and A. Bicchi and A Settimi and A. Rocchi and A. Ajoudani} } @conference {2788, title = { WALK-MAN humanoid lower body design optimization for enhanced physical performance}, booktitle = {IEEE International Conference of Robotics and Automation (ICRA2016)}, year = {2016}, pages = {1817 - 1824}, publisher = {IEEE}, organization = {IEEE}, address = {Stockholm, Sweden, May 16-21, 2016 }, abstract = {
The deployment of robots to assist in environments hostile for humans during emergency scenarios require robots to demonstrate enhanced physical performance, that includes adequate power, adaptability and robustness to physical interactions and efficient operation. This work presents the design and development of the lower body of the new high performance humanoid WALK-MAN, a robot developed recently to assist in disaster response scenarios. The paper introduces the details of the WALK-MAN lower-body, highlighting the innovative design optimization features considered to maximize the leg performance. Starting from the general lower body specifications the objectives of the design and how they were addressed are introduced, including the selection of the leg kinematics, the arrangement of the actuators and their integration with the leg structure to maximize the range of motion, reduce the leg mass and inertia, and shape the leg mass distribution for better dynamic performance. Physical robustness is ensured with the integration of elastic transmission and impact energy absorbing covers. Experimental walking trials demonstrate the correct operation of the legs while executing a walking gait.
}, keywords = {Robotics}, doi = {10.1109/ICRA.2016.7487327}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7487327}, author = {F. Negrello and M. Garabini and M. G. Catalano and P. Kryczka and W. Choi and D. G. Caldwell and A. Bicchi and N. G. Tsagarakis} } @article {2749, title = {The Walk-Man Robot Software Architecture}, journal = {Front. Robot. AI}, year = {2016}, month = {05/2016}, abstract = {

A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot participant at the Darpa Robotics Challenge. The challenge required the robot to execute many different tasks, such as walking, driving a car, and manipulating objects. These tasks need to be solved by robotics specialists in their corresponding research field, such as humanoid walking, motion planning, or object manipulation. The proposed architecture was developed in 10 months, provided boilerplate code for most of the functionalities required to control a humanoid robot and allowed robotics researchers to produce their control modules for DRC tasks in a short time. Additional capabilities of the architecture include firmware and hardware management, mixing of different middlewares, unreliable network management, and operator control station GUI. All the source code related to the architecture and some control modules have been released as open source projects.

}, keywords = {Robotics}, doi = { http://dx.doi.org/10.3389/frobt.2016.00025}, url = {http://bit.ly/2jAPke2}, author = {M. Ferrati and A Settimi and L. Muratore and N. G. Tsagarakis and L. Natale and L. Pallottino} } @conference {2723, title = {A Wearable Fabric-based Display for Haptic Multi-Cue Delivery}, booktitle = {IEEE Haptics Symposium}, year = {2016}, publisher = {IEEE}, organization = {IEEE}, address = {Philadelphia, USA, April 8-11, 2016}, abstract = {

Softness represents one of the most informative

haptic properties, which plays a fundamental role in both

everyday tasks and more complex procedures. Thus, it is not

surprising that much effort has been devoted to designing haptic

systems able to suitably reproduce this information. At the

same time, wearability has gained an increasing importance as

a novel paradigm to enable a more effective and naturalistic

human robot interaction. Capitalizing upon our previous works

on grounded softness devices, in this paper we present the

Wearable Fabric Yielding Display (W-FYD), a fabric-based

tactile display for multi-cue delivery that can be worn by

user{\textquoteright}s finger. W-FYD enables to implement both passive and

active tactile exploration. Different levels of stiffness can be

reproduced by modulating the stretching state of a fabric

through two DC motors. An additional vertical degree of

freedom is implemented through a lifting mechanism, which

enables to convey softness stimuli to the user{\textquoteright}s finger pad.

Furthermore, a sliding effect on the finger can be also induced.

Experiments with humans show the effectiveness of W-FYD for

haptic multi-cue delivery.

}, keywords = {Haptics, Robotics}, doi = {10.1109/HAPTICS.2016.7463190}, url = {http://ieeexplore.ieee.org/search/searchresult.jsp?queryText=A\%20Wearable\%20Fabric-based\%20Display\%20for\%20Haptic\%20Multi-Cue\%20Delivery\&newsearch=true}, author = {M. Bianchi and E. Battaglia and M. Poggiani and S. Ciotti and A. Bicchi} } @article {3233, title = {Wearable Textile Platform for Assessing Stroke Patient Treatment in Daily Life Conditions}, journal = {FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY}, volume = {4}, year = {2016}, pages = {1{\textendash}28}, keywords = {ambulatory monitoring, data fusion, gait, Grasping, reaching, stroke rehabilitation, wearable sensors}, doi = {10.3389/fbioe.2016.00028}, author = {F. Lorussi and N. Carbonaro and D. De Rossi and R. Paradiso and Veltink, P. and A. Tognetti} } @article {2715, title = {Wearable goniometer and accelerometer sensory fusion for knee joint angle measurement in daily-life}, journal = {SENSORS}, volume = {15}, year = {2015}, pages = {28435{\textendash}28455}, keywords = {Bioengineering}, issn = {1424-8220}, doi = {10.3390/s151128435}, url = {http://dx.medra.org/10.3390/s151128435}, author = {A. Tognetti and F. Lorussi and N. Carbonaro and D. De Rossi} } @article {2143, title = {Wearable Monitoring for Mood Recognition in Bipolar Disorder based on History-Dependent Long-Term Heart Rate Variability Analysis}, journal = {IEEE Journal of Biomedical and Health Informatics}, year = {2014}, keywords = {Bioengineering}, author = {G. Valenza and M. Nardelli and A Lanata and C. Gentili and G. Bertschy and R. Paradiso and E. P. Scilingo} } @article {2241, title = {Wearable Wireless Tactile Display for Virtual Interactions with Soft Bodies}, journal = {Frontiers in Bioengineering and Biotechnology}, volume = {2}, year = {2014}, abstract = {

We describe here a wearable, wireless, compact, and lightweight tactile display, able to mechanically stimulate the fingertip of users, so as to simulate contact with soft bodies in virtual environments. The device was based on dielectric elastomer actuators, as high-performance electromechanically active polymers. The actuator was arranged at the user{\textquoteright}s fingertip, integrated within a plastic case, which also hosted a compact high-voltage circuitry. A custom-made wireless control unit was arranged on the forearm and connected to the display via low-voltage leads. We present the structure of the device and a characterization of it, in terms of electromechanical response and stress relaxation. Furthermore, we present results of a psychophysical test aimed at assessing the ability of the system to generate different levels of force that can be perceived by users.

}, keywords = {Bioengineering}, doi = {10.3389/fbioe.2014.00031}, url = {http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4150388/}, author = {G. Frediani and D. Mazzei and D. De Rossi and F. Carpi} } @conference {2004, title = {Wearable systems for e-health: Telemonitoring and telerehabilitation}, booktitle = {Proceedings of the IASTED African Conference on Health Informatics, AfricaHI 2012}, year = {2012}, pages = {335{\textendash}338}, doi = {10.2316/P.2012.763-004}, url = {http://dx.medra.org/10.2316/P.2012.763-004}, author = {D. De Rossi and F. Lorussi and A. Tognetti} } @conference {2013, title = {Wearable biomonitoring system for stress management: A preliminary study on robust ECG signal processing}, booktitle = {2011 IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks, WoWMoM 2011}, year = {2011}, month = {20-24 June}, pages = {{\textendash}}, doi = {10.1109/WoWMoM.2011.5986192}, url = {http://dx.medra.org/10.1109/WoWMoM.2011.5986192}, author = {N. Carbonaro and G. Anania and G. Dalle Mura and M. Tesconi and A. Tognetti and G. Zupone and D. De Rossi} } @book {2011, title = {Wearable Kinaesthetic Systems for Capturing Body Posture and Gesture}, year = {2011}, publisher = {VDM Verlag Dr. M?ller}, organization = {VDM Verlag Dr. M?ller}, isbn = {3639333276}, author = {A. Tognetti} } @inbook {2009, title = {Wearable Monitoring Systems}, year = {2011}, pages = {205{\textendash}219}, publisher = {Springer US}, organization = {Springer US}, chapter = {Emergency and work}, isbn = {9781441973832}, doi = {10.1007/978-1-4419-7384-9_10}, url = {http://dx.medra.org/10.1007/978-1-4419-7384-9_10}, author = {Bonfiglio, A. and Curone, D. and Secco, E. and G. Magenes and A. Tognetti} } @inbook {2010, title = {Wearable Monitoring Systems}, year = {2011}, pages = {3{\textendash}25}, chapter = {Sensors for Wearable Systems}, isbn = {9781441973832}, doi = {10.1007/978-1-4419-7384-9_1}, url = {http://dx.medra.org/10.1007/978-1-4419-7384-9_1}, author = {E. P. Scilingo and A Lanata and A. Tognetti} } @article {2008, title = {Wearable Systems for Brain body Reading and Mind Healing}, journal = {CYBER THERAPY AND REHABILITATION MAGAZINE}, year = {2011}, pages = {39{\textendash}40}, issn = {1784-9926}, author = {A. Tognetti and E. P. Scilingo and G. Anania and N. Carbonaro and A Lanata and F. Lorussi and D. Mazzei and G. Valenza and D. De Rossi} } @conference {2025, title = {Wearable monitoring of lumbar spine curvature by inertial and e-textile sensory fusion}, booktitle = {2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC{\textquoteright}10}, year = {2010}, pages = {6373{\textendash}6376}, publisher = {IEEE}, organization = {IEEE}, address = {USA}, doi = {10.1109/IEMBS.2010.5627294}, url = {http://dx.medra.org/10.1109/IEMBS.2010.5627294}, author = {R. Bartalesi and F. Lorussi and D. De Rossi and M. Tesconi and A. Tognetti} } @article {2016, title = {A WEARABLE SYSTEM FOR MONITORING GESTURE, POSTURE AND PHYSIOLOGICAL CORRELATES OF EMOTION}, journal = {PARKINSONISM \& RELATED DISORDERS}, year = {2010}, pages = {{\textendash}}, issn = {1353-8020}, author = {Debarnot, U. and F. Lorussi and E. P. Scilingo and A. Tognetti and D. De Rossi} } @conference {2030, title = {Wearable Kinesthetic Systems and Emerging Technologies in Actuation for Upperlimb Neurorehabilitation}, booktitle = {Proc. of the IEEE EMBC 2009}, year = {2009}, month = {02/09/ - 06/09/}, pages = {6830{\textendash}6833}, doi = {10.1109/IEMBS.2009.5334481}, url = {http://dx.medra.org/10.1109/IEMBS.2009.5334481}, author = {D. De Rossi and F. Carpi and F. Lorussi and E. P. Scilingo and A. Tognetti} } @article {1401, title = {Working towards autonomous distributed systems}, journal = {SEA TECHNOLOGY}, volume = {48}, year = {2007}, note = {

Editorial

}, pages = {7{\textendash}7}, keywords = {Robotics}, issn = {0093-3651}, author = {A. Caiti} } @inbook {DLMS01, title = {Wearable Mechanosensing and Emerging Technologies in Fabric-based Actuation}, booktitle = {Intelligent Textiles for Personal Protection and Safety}, volume = {3}, year = {2006}, pages = {55-64}, publisher = {IOS Press}, organization = {IOS Press}, edition = { }, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and E. P. Scilingo and A. Tognetti} } @article {LRSTD04, title = {Wearable, Redundant Fabric-Based Sensor Arrays for Reconstruction of Body Segment Posture}, journal = {IEEE Sensors Journal}, volume = {4}, number = {6}, year = {2004}, month = {December}, pages = {807-818}, keywords = {Bioengineering}, author = {F. Lorussi and W. Rocchia and E. P. Scilingo and A. Tognetti and D. De Rossi} } @conference {LSTTD-03, title = {Wearable Sensing Garment For Posture Detection, Rehabilitation And Tele-Medicine}, booktitle = {4th International IEEE EMBS Special Topic Conference on Information Technology Applications in Biomedicine}, year = {2003}, month = {April}, pages = {287-290}, address = {Birmingham,UK}, keywords = {Bioengineering}, author = {F. Lorussi and E. P. Scilingo and M. Tesconi and A. Tognetti and D. De Rossi} } @conference {TCLMOSTD-03, title = {Wearable Sensory-Motor Orthoses for Tele-Rehabilitation}, booktitle = {25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society}, year = {2003}, month = {September}, pages = {3724-3727}, address = {Cancun,Mexico}, keywords = {Bioengineering}, author = {A. Tognetti and F. Carpi and F. Lorussi and A. Mazzoldi and P. Orsini and E. P. Scilingo and M. Tesconi and D. De Rossi} } @conference {PGPALSDO-02, title = {A wearable motion capture system for multimedia applications}, booktitle = {Avantex Symposium - International Forum for Textiles and Technology in the Future}, year = {2002}, month = {May}, address = {Frankfurt, Germany}, keywords = {Bioengineering}, author = {R. Paradiso and M. Ghignoli and M. Pacelli and G. Anerdi and F. Lorussi and E. P. Scilingo and D. De Rossi and P. Orsini} } @conference {PPDLMSO-01, title = {Wearable technology for multisensory expressive gesture applications}, booktitle = {5th International Symposium on Wearable Computers}, year = {2001}, month = {October}, address = {Zurich, Switzerland}, keywords = {Biomechanics, Smart Textiles}, author = {R. Paradiso and M. Pacelli and D. De Rossi and F. Lorussi and A. Mazzoldi and E. P. Scilingo and P. Orsini} } @inbook {DLMS01, title = {Wearable thermo- and piezoresistive sensors: realization and properties}, booktitle = {Sensors and Microsystems}, year = {2001}, pages = {195-200}, publisher = {World Scientific}, organization = {World Scientific}, keywords = {Piezoresistive sensor, Smart Textiles}, author = {D. De Rossi and F. Lorussi and A. Mazzoldi and E. P. Scilingo} } @inbook {VB93, title = {Whole Hand Manipulation: Design of an Articulated Hand Exploiting All Its Parts To Increase Dexterity}, booktitle = {Robots and Biological Systems}, series = {NATO-ASI Series F: Computer and Systems Sciences, vol. 102}, year = {1993}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Berlin Heidelberg, Germany}, keywords = {Haptics, Robotics}, author = {G. Vassura and A. Bicchi}, editor = {P. Dario and P. Aebischer and G. Sandini} }