@proceedings {2992, title = {Towards Minimum-Information Adaptive Controllers for Robot Manipulators}, year = {2017}, publisher = {IEEE}, address = {May 24{\textendash}26 2017, Seattle USA}, abstract = {

The aim of this paper is to move a step in the direction of determining the minimum amount of information needed to control a robot manipulator within the framework of adaptive control. Recent innovations in the state of the art show how global asymptotic trajectory tracking can be achieved despite the presence of uncertainties in the kinematic and dynamic models of the robot. However, a clear distinction between
which parameters can be included among the uncertainties, and which parameters can not, has not been drawn yet. Since most of the adaptive control algorithms are built on linearly parameterized models, we propose to reformulate the problem as finding a procedure to determine whether and how a given dynamical system can be linearly parameterized with respect to a specific set of parameters.
Within this framework, we show how the trajectory tracking problem of a manipulator can be accomplished with the only knowledge of the number of joints of the manipulator. As an illustrative example, we present the end-effector trajectory tracking control of a robot initialized with the kinematic model of a different robot.

}, keywords = {Robotics}, doi = {https://doi.org/10.23919/ACC.2017.7963602}, url = {https://ieeexplore.ieee.org/document/7963602}, author = {T. Marcucci and C. Della Santina and M Gabiccini and A. Bicchi} } @conference {2883, title = {Toward whole-body loco-manipulation: Experimental results on multi-contact interaction with the Walk-Man robot}, booktitle = {IEEE International Conference of Intelligent Robots and Systems (IROS 2016)}, year = {2016}, publisher = {IEEE}, organization = {IEEE}, address = {Danjeon, Korea, October 10-14 2016}, abstract = {

In this paper a quasi-static framework for optimally controlling the contact force distribution is experimentally verified with the full-size compliant humanoid robot Walk-Man. The proposed approach is general enough to cope with multi-contact scenarios, i.e. robot-environment interactions occurring on feet and hands, up to the more general case of whole-body loco-manipulation, in which the robot is in contact with the environment also with the internal limbs, with a consequent loss of contact force controllability. Experimental tests were conducted with the Walk-Man robot (i) standing on flat terrain, (ii) standing on uneven terrain and (iii) interacting with the environment with both feet and a hand touching a vertical wall. Moreover, the influence of unmodeled weight on the robot, and the combination with a higher priority Cartesian tasks are shown. Results are presented also in the attached video.

}, keywords = {Robotics}, doi = {10.1109/IROS.2016.7759225}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7759225}, author = {E. Farnioli and M Gabiccini and A. Bicchi} } @conference {2084, title = {The tactile toolbox}, booktitle = {Haptics Symposium (HAPTICS), 2014 IEEE}, year = {2014}, address = {Houston, TX}, keywords = {Haptics, Robotics}, doi = {10.1109/HAPTICS.2014.6775573}, author = {A. Serio and M. Bianchi and M Gabiccini and A. Bicchi} } @conference {2307, title = { Three-digit grasp haptic device with variable contact stiffness for rehabilitation and human grasping studies}, booktitle = {22nd Mediterranean Conference of Control and Automation (MED) 2014 }, year = {2014}, pages = {346 - 350}, publisher = {IEEE}, organization = {IEEE}, address = {Palermo, Italy, 16-19 June 2014 }, abstract = {

This paper describes an haptic system designed to vary the stiffness of three contact points in an independent and controllable fashion, by suitably regulating the inner pressure of three pneumatic tactile displays. At the same time, the contact forces exerted by the user are measured by six degree-of-freedom force sensors placed under each finger. This device might be profitably used in hand rehabilitation and human grasping studies. We report and discuss preliminary results on device validation as well as some illustrative measurement examples.

}, keywords = {Haptics, Robotics}, doi = {10.1109/MED.2014.6961395}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=6961395}, author = {Altobelli, A and M. Bianchi and A. Serio and Baud-Bovy, G and M Gabiccini and A. Bicchi} } @conference {1238, title = {Tele-Impedance: Exploring the Role of Common-Mode and Configuration-Dependant Stiffness}, booktitle = {IEEE-RAS International Conference on Humanoid Robots}, year = {2012}, pages = {363-369}, address = {Osaka, Japan}, keywords = {Robotics}, author = {A. Ajoudani and M Gabiccini and N G Tsagarakis and A Albu-Schaeffer and A. Bicchi} }