@article {3446, title = {Humanoids at Work: The WALK-MAN Robot in a Postearthquake Scenario}, journal = {IEEE Robotics Automation Magazine}, year = {2018}, pages = {1-1}, keywords = {Buildings, Earthquakes, Hardware, Legged locomotion, Robot sensing systems, Task analysis}, issn = {1070-9932}, doi = {10.1109/MRA.2017.2788801}, author = {F. Negrello and A Settimi and D. Caporale and G. Lentini and M. Poggiani and D. Kanoulas and L. Muratore and Luberto, E. and G. Santaera and L. Ciarleglio and L. Ermini and L. Pallottino and D. G. Caldwell and N. Tsagarakis and A. Bicchi and M. Garabini and M. G. Catalano} } @inbook {3381, title = {WALK-MAN Humanoid Platform}, booktitle = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, volume = {121}, number = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, year = {2018}, pages = {495{\textendash}548}, publisher = {Springer}, organization = {Springer}, doi = {10.1007/978-3-319-74666-1_13}, author = {N. G. Tsagarakis and F. Negrello and M. Garabini and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and M. G. Catalano and M. Ferrati and L. Muratore and P. Kryczka and E. Mingo Hoffman and A Settimi and A. Rocchi and A. Margan and S. Cordasco and D. Kanoulas and A. Cardellino and L. Natale and H. Dallali and J. Malzahn and N. Kashiri and V. Varricchio and L. Pallottino and C. Pavan and J. Lee and A. Ajoudani and D. G. Caldwell and A. Bicchi} } @conference {3218, title = {Design and characterization of a novel high-compliance spring for robots with soft joints}, booktitle = {IEEE International Conference on Advanced Intelligent Mechatronics (AIM)}, year = {2017}, publisher = {IEEE}, organization = {IEEE}, address = {Munich, Germany, 3-7 July 2017}, abstract = {

Low stiffness elements have a number of applications in Soft Robotics, from Series Elastic Actuators (SEA) to torque sensors for compliant systems. In its general formulation, the design problem of elastic components is complex and depends on several variables: material properties, load range, shape factor and size constraints. Consequently, most of the spring designs presented in literature are based on heuristics or are optimized for specific working conditions. This work presents the design study and characterization of a scalable spoked elastic element with hinge tip constraints. We compared the proposed design with three existing spring principles, showing that the spoked solution is the convenient option for low-stiffness and low shape factor elastic elements. Therefore, a design analysis on the main scaling parameters of the spoked spring, namely number of spokes and type of constraints, is presented. Finally, an experimental characterization has been conducted on physical prototypes. The agreement among simulations and experimental results demonstrates the effectiveness of the proposed concept.

}, keywords = {Robotics}, doi = {10.1109/AIM.2017.8014029}, url = {http://ieeexplore.ieee.org/document/8014029/}, author = {F. Negrello and M. G. Catalano and M. Garabini and M. Poggiani and D. G. Caldwell and N. G. Tsagarakis and A. Bicchi} } @article {3137, title = {WALK-MAN: A High-Performance Humanoid Platform for Realistic Environments}, journal = {Journal of Field Robotics}, volume = {34}, year = {2017}, month = {06/2017}, pages = {1 - 34}, abstract = {

In this work, we present WALK-MAN, a humanoid platform that has been developed to operate in realistic unstructured environment, and demonstrate new skills including powerful manipulation, robust balanced locomotion, high-strength capabilities, and physical sturdiness. To enable these capabilities, WALK-MAN design and actuation are based on the most recent advancements of series elastic actuator drives with unique performance features that differentiate the robot from previous state-of-the-art compliant actuated robots. Physical interaction performance is benefited by both active and passive adaptation, thanks to WALK-MAN actuation that combines customized high-performance modules with tuned torque/velocity curves and transmission elasticity for high-speed adaptation response and motion reactions to disturbances. WALK-MAN design also includes innovative design optimization features that consider the selection of kinematic structure and the placement of the actuators with the body structure to maximize the robot performance. Physical robustness is ensured with the integration of elastic transmission, proprioceptive sensing, and control. The WALK-MAN hardware was designed and built in 11 months, and the prototype of the robot was ready four months before DARPA Robotics Challenge (DRC) Finals. The motion generation of WALK-MAN is based on the unified motion-generation framework of whole-body locomotion and manipulation (termed loco-manipulation). WALK-MAN is able to execute simple loco-manipulation behaviors synthesized by combining different primitives defining the behavior of the center of gravity, the motion of the hands, legs, and head, the body attitude and posture, and the constrained body parts such as joint limits and contacts. The motion-generation framework including the specific motion modules and software architecture is discussed in detail. A rich perception system allows the robot to perceive and generate 3D representations of the environment as well as detect contacts and sense physical interaction force and moments. The operator station that pilots use to control the robot provides a rich pilot interface with different control modes and a number of teleoperated or semiautonomous command features. The capability of the robot and the performance of the individual motion control and perception modules were validated during the DRC in which the robot was able to demonstrate exceptional physical resilience and execute some of the tasks during the competition.

}, keywords = {Robotics}, issn = {1556-4967}, doi = {10.1002/rob.21702}, url = {http://onlinelibrary.wiley.com/doi/10.1002/rob.21702/epdf}, author = {N. G. Tsagarakis and D. G. Caldwell and F. Negrello and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and L. Muratore and A. Margan and A. Cardellino and L. Natale and E. Mingo Hoffman and H. Dallali and N. Kashiri and J. Malzahn and J. Lee and P. Kryczka and D. Kanoulas and M. Garabini and M. G. Catalano and M. Ferrati and V. Varricchio and L. Pallottino and C. Pavan and A. Bicchi and A Settimi and A. Rocchi and A. Ajoudani} } @conference {2545, title = {A Modular Compliant Actuator for Emerging High Performance and Fall-Resilient Humanoids}, booktitle = {15th IEEE RAS Humanoids Conference (HUMANOIDS2015)}, year = {2016}, note = {

This work is supported by the WALK-MAN FP7-ICT-2013-10 European Commission project.

}, publisher = {IEEE}, organization = {IEEE}, keywords = {Robotics}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7363567}, author = {F. Negrello and M. Garabini and M. G. Catalano and J. Malzahn and D. G. Caldwell and A. Bicchi and N. G. Tsagarakis} } @conference {2788, title = { WALK-MAN humanoid lower body design optimization for enhanced physical performance}, booktitle = {IEEE International Conference of Robotics and Automation (ICRA2016)}, year = {2016}, pages = {1817 - 1824}, publisher = {IEEE}, organization = {IEEE}, address = {Stockholm, Sweden, May 16-21, 2016 }, abstract = {
The deployment of robots to assist in environments hostile for humans during emergency scenarios require robots to demonstrate enhanced physical performance, that includes adequate power, adaptability and robustness to physical interactions and efficient operation. This work presents the design and development of the lower body of the new high performance humanoid WALK-MAN, a robot developed recently to assist in disaster response scenarios. The paper introduces the details of the WALK-MAN lower-body, highlighting the innovative design optimization features considered to maximize the leg performance. Starting from the general lower body specifications the objectives of the design and how they were addressed are introduced, including the selection of the leg kinematics, the arrangement of the actuators and their integration with the leg structure to maximize the range of motion, reduce the leg mass and inertia, and shape the leg mass distribution for better dynamic performance. Physical robustness is ensured with the integration of elastic transmission and impact energy absorbing covers. Experimental walking trials demonstrate the correct operation of the legs while executing a walking gait.
}, keywords = {Robotics}, doi = {10.1109/ICRA.2016.7487327}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7487327}, author = {F. Negrello and M. Garabini and M. G. Catalano and P. Kryczka and W. Choi and D. G. Caldwell and A. Bicchi and N. G. Tsagarakis} }