@article {2904, title = {Variable Stiffness Actuators: Review on Design and Components}, journal = { IEEE/ASME Transactions on Mechatronics }, volume = {21}, year = {2016}, month = {10/2016}, pages = {2418 - 2430}, abstract = {

Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.

}, keywords = {Robotics}, doi = {10.1109/TMECH.2015.2501019}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7330025}, author = {S. Wolf and G. Grioli and O. Eiberger and W. Friedl and M. Grebenstein and H. Hoppner and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and D. Lefeber and S. Stramigioli and N. G. Tsagarakis and M. Van Damme and R. Van Ham and B. Vanderborght and L. C. Visser and A. Bicchi and A Albu-Schaeffer} } @article {2080, title = {Variable Stiffness Actuators: the user{\textquoteright}s point of view}, journal = {Int. J. Robotics Research}, volume = {34}, year = {2015}, note = {

Extensions.zip

}, month = {05/2015}, pages = {727-743}, keywords = {Robotics}, doi = {10.1177/0278364914566515}, url = {http://ijr.sagepub.com/cgi/reprint/0278364914566515v1.pdf?ijkey=anmgudvoLz7ZloP\&keytype=finite}, author = {G. Grioli and S. Wolf and M. Garabini and M. G. Catalano and E. Burdet and D. G. Caldwell and R. Carloni and W. Friedl and M. Grebenstein and M. Laffranchi and D. Lefeber and S. Stramigioli and N G Tsagarakis and M. Van Damme and B. Vanderborght and A Albu-Schaeffer and A. Bicchi} } @conference {2450, title = {Variable Stiffness Control for Oscillation Damping}, booktitle = {IEEE International Conference of Intelligent Robots and Systems (IROS2015)}, year = {2015}, note = {
This work is supported by the EC under the grant agreements no.611832 Walk-Man and ICT-287513 {\textquotedblleft}SAPHARI{\textquotedblright}
}, pages = {6543 - 6550}, publisher = {IEEE}, organization = {IEEE}, address = {Hamburg, Germany, September 28 - October 02, 2015}, keywords = {Robotics}, doi = {10.1109/IROS.2015.7354312}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7354312}, author = {G M Gasparri and M. Garabini and L. Pallottino and L. Malagia and M. G. Catalano and G. Grioli and A. Bicchi} } @conference {2037, title = {Velvet Fingers: Grasp Planning and Execution for an Underactuated Gripper with Active Surfaces}, booktitle = {2014 IEEE International Conference on Robotics and Automation}, year = {2014}, pages = {3669 - 3675}, publisher = {IEEE}, organization = {IEEE}, address = {Hong Kong, May 31 2014-June 7 2014}, abstract = {

In this work we tackle the problem of planning grasps for an underactuated gripper which enable it to retrieve target objects from a cluttered environment. Furthermore, we investigate how additional manipulation capabilities of the gripping device, provided by active surfaces on the inside of the fingers, can lead to performance improvement in the grasp execution process. To this end, we employ a simple strategy, in which the target object is {\textquoteleft}pulled-in{\textquoteright} towards the palm during grasping which results in firm enveloping grasps. We show the effectiveness of the suggested methods by means of experiments conducted in a real-world scenario.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2014.6907390 }, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=6907390}, author = {R. Krug and T. Stoyanov and M. Bonilla and V. Tincani and N. Vaskeviciusz and G Fantoni and A. Birkz and A. Lilienthal and A. Bicchi} } @article {1698, title = {Variable Impedance Actuators: a Review}, journal = {Robotics and Autonomous Systems}, volume = {61}, year = {2013}, note = {

Available online 6 August 2013

}, month = {12/2013}, pages = {1601{\textendash}1614}, abstract = {

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA{\textquoteright}s to be guided in the design and implementation process for their targeted application.

}, keywords = {Robotics, Soft robotics, Variable Impedance Actuators}, url = {http://www.sciencedirect.com/science/article/pii/S0921889013001188}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and O. Eiberger and W. Friedl and G. Ganesh and M. Garabini and M. Grebenstein and G. Grioli and S. Haddadin and H. Hoppner and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {CGGBDBTB12, title = {A Variable Damping module for Variable Impedance Actuation}, booktitle = {International Conference of Robotics and Automation - ICRA 2012}, year = {2012}, month = {May 14 - 18}, pages = {2666 - 2672}, address = {Saint Paul, MN, USA}, keywords = {Robotics}, author = {M. G. Catalano and G. Grioli and M. Garabini and F. A. W. Belo and A. Di Basco and N G Tsagarakis and A. Bicchi} } @article {1245, title = {Variable Impedance Actuators: Moving the Robots of Tomorrow}, year = {2012}, keywords = {Robotics}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and G. Ganesh and M. Garabini and G. Grioli and S. Haddadin and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {1243, title = { Velvet fingers: A dexterous gripper with active surfaces}, booktitle = {International Conference of Intelligent Robots and Systems - IROS 2012}, year = {2012}, month = {October 7 - 12}, pages = {1257 - 1263 }, address = {Vilamoura, Algarve, Portugal}, keywords = {Robotics}, author = {V. Tincani and M. G. Catalano and E. Farnioli and M. Garabini and G. Grioli and G Fantoni and A. Bicchi} } @conference {GCGSSBMBP11, title = {Variable stiffness actuators: muscles for the next generation of robots}, booktitle = {Automatica.it 2011}, year = {2011}, note = {

poster presentation

}, month = {September, 7 - 9}, address = {Pisa, Italy}, keywords = {Robotics}, author = {G. Grioli and M. G. Catalano and M. Garabini and F. Bonomo and A. Serio and P Salaris and F. A. W. Belo and M. Mancini and A. Bicchi and A. Passaglia} } @conference {CGGBB11, title = {VSA - CubeBot. A modular variable stiffness platform for multi degrees of freedom systems}, booktitle = {2011 IEEE International Conference on Robotics and Automation}, year = {2011}, month = {May 9 - 13}, pages = {5090 - 5095}, address = {Shangai, China}, keywords = {Robotics}, author = {M. G. Catalano and G. Grioli and M. Garabini and F. Bonomo and M. Mancini and N G Tsagarakis and A. Bicchi} } @conference {BGSSB, title = {Validation of a Virtual Reality Environment to Study Anticipatory Modulation of Digit Forces and Position}, booktitle = {Eurohaptics 2010}, series = {Lecture Notes in Computer Science}, volume = {6192/2010}, year = {2010}, month = {July, 8 - 10}, pages = {136 - 143}, address = {Amsterdam (The Netherlands)}, keywords = {Haptics, Robotics}, author = {M. Bianchi and G. Grioli and E. P. Scilingo and M. Santello and A. Bicchi} } @inbook {FSBB10, title = {Visual Servoing via Advanced Numerical Methods}, volume = {401}, year = {2010}, pages = {335 - 360}, publisher = {Springer}, organization = {Springer}, chapter = {Unicycle{\textendash}like Robots with Eye-In-Hand Monocular Cameras: from PBVS Towards IBVS}, keywords = {Robotics}, author = {D. Fontanelli and P Salaris and F. A. W. Belo and A. Bicchi}, editor = {Graziano Chesi and Koichi Hashimoto} } @conference {CGBSB10, title = {VSA-HD: From the Enumeration Analysis to the Prototypical Implementation}, booktitle = {IEEE/RSJ International Conference on Intelligent RObots and Systems}, year = {2010}, month = {October}, pages = {3676 - 3681}, address = {St. Louis MO USA}, keywords = {Embedded Control, Robotics}, author = {M. G. Catalano and G. Grioli and F. Bonomo and R. Schiavi and A. Bicchi} } @inbook {FSBB09_STAR, title = {Visual appearance mapping for optimal vision based servoing}, series = {Springer Tracts in Advanced Robotics (STAR)}, volume = {54 - Experimental Robotics}, year = {2009}, month = {March 28}, pages = {353 - 362}, publisher = {Springer}, organization = {Springer}, keywords = {Robotics}, author = {D. Fontanelli and P Salaris and F. A. W. Belo and A. Bicchi}, editor = {B. Siciliano and O. Khatib and Groen, F.} } @article {FDSBB09, title = {Visual Servoing in the Large}, journal = {International Journal of Robotics Research}, volume = {28}, number = {6}, year = {2009}, month = {June}, pages = {802 - 814}, abstract = {

In this paper we consider the problem of maneuvering an autonomous robot in complex unknown environments using vision. The goal is to accurately servo a wheeled vehicle to a desired posture using only feedback from an on-board camera, taking into account the nonholonomic nature of the vehicle kinematics and the limited field-ofview of the camera. With respect to existing visual servoing schemes, which achieve similar goals locally (i.e. when the desired and actual camera views are sufficiently similar), we propose a method to visually navigate the robot through an extended visual map before eventually reaching the desired goal. The map comprises a set of images, previously stored in an exploratory phase, that convey both topological and metric information regarding the connectivity through feasible robot paths and the geometry of the environment, respectively. Experimental results on a laboratory setup are reported showing the practicality of the proposed approach.

}, keywords = {Embedded Control, Robotics}, author = {D. Fontanelli and A. Danesi and F. A. W. Belo and P Salaris and A. Bicchi} } @conference {DFB, title = {Visual Servoing on Image Maps}, booktitle = {Experimental Robotics}, series = {Springer Tracts in Advanced Robotics (STAR)}, volume = {39}, year = {2008}, note = {

proceedings of the 2006 symposium of experimental robotics

}, pages = {277 - 286}, publisher = {Springer Berlin / Heidelberg}, organization = {Springer Berlin / Heidelberg}, keywords = {Robotics}, author = {A. Danesi and D. Fontanelli and A. Bicchi} } @conference {iser08, title = {Visual SLAM for Servoing for Appearance Based Topological Maps}, booktitle = {Proc. Ints. Symp. Experimental Robotics}, series = {Experimental Robotics}, volume = {39/2008}, year = {2008}, pages = {277-286}, keywords = {Robotics}, author = {P Salaris and F. A. W. Belo and D. Fontanelli and A. Bicchi}, editor = {Springer-Verlag} } @conference {schiavi2008icra, title = {VSA-II: A Novel Prototype of Variable Stiffness Actuator for Safe and Performing Robots Interacting with Humans}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2008}, pages = {2171 - 2176}, abstract = {

This paper presents design and performance of a novel joint based actuator for a robot run by variable stiffness actuation, meant for systems physically interacting with humans. This new actuator prototype (VSA-II) is developed as an improvement over our previously developed one reported in [9], where an optimal mechanical-control co-design principle established in [7] is followed as well. While the first version was built in a way to demonstrate effectiveness of variable impedance actuation (VIA), it had limitations in torque capacities, life cycle and implementability in a real robot. VSA-II overcomes the problem of implementability with higher capacities and robustness in design for longer life. The paper discusses design and stiffness behaviour of VSA-II in theory and experiments. A comparison of stiffness characteristics between the two actuator is discussed, highlighting the advantages of the new design. A simple, but effective PD scheme is employed to independently control joint-stiffness and joint-position of a 1-link arm. Finally, results from performed impact tests of 1- link arm are reported, showing the effectiveness of stiffness variation in controlling value of a safety metric.

}, keywords = {Robotics}, author = {R. Schiavi and G. Grioli and S. Sen and A. Bicchi} } @conference {FSB07, title = {Variable Impedance Actuations for Physical Human Cooperating Robots: a Comparative Analysis of Performance, Safety and Dependability}, booktitle = {Proc. IARP-IEEE/RAS-EURON Workshop on Technical Challenges for Dependable Robots in Human Environments.}, year = {2007}, month = {April}, abstract = {

An antagonistic actuation with variable stiffness is proposed for ensuring safety and performance in human friendly robotic applications. Various arrangements are analysed with respect to performance, safety and dependability. The results are expected to provide useful guidelines for choosing an actuation mechanism and its implementation for human-robot interactive applications.

}, keywords = {Robotics}, author = {R. Filippini and S. Sen and A. Bicchi} } @conference {FAB05, title = {Visual-based Feedback Control of Casting Manipulation}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2005}, note = {

(ICRA05 B. Wegbreit Award for Best Manipulation Paper)

}, pages = {2203-2208}, abstract = {

In this paper, we present a method to control casting manipulation by means of real-time visual feedback. Casting manipulation is a technique to deploy a robotic end-effector at large distances from the robot{\textquoteright}s base, by throwing the end-effector and controlling its ballistic flight using forces transmitted through a light tether connected to the end-effector itself. The tether cable can also be used to retrieve the end-effector and exert forces on the robot{\textquoteright}s environment. Previous work has shown that casting manipulation is able to catch objects at a large distance, proving it viable for applications such as sample acquisition and return, rescue, etc. In previous experiments, the position of the target object was known exactly. In this paper, we present a first attempt at closing a real-time control loop on casting manipulation using visual feedback of moving targets. As accurate planning methods developed for off-line open-loop planning cannot be used in real-time, we develop a simplified model and control algorithm, whose effectiveness is demonstrated through experiments.

}, keywords = {Robotics}, author = {A. Fagiolini and H. Arisumi and A. Bicchi} } @inbook {BTBP03, title = {Variable Stiffness Actuators for Fast and Safe Motion Control}, booktitle = {Proceedings of the International Symposium on Robotics Research}, series = {Springer Tracts in Advanced Robotics (STAR)}, year = {2003}, publisher = {Springer Verlag}, organization = {Springer Verlag}, abstract = {

In this paper we propose Variable Stiffness actuation as a viable mechanical/control co-design approach for guaranteeing control performance for robot arms that are inherently safe to humans in their environment. A new actuator under development in our Lab is then proposed, which incorporate the possibility to vary transmission stiffness during motion execution, thus allowing substantial motion speed-up while maintaining low injury risk levels.

}, keywords = {Robotics}, author = {A. Bicchi and G. Tonietti and M. Bavaro and M. Piccigallo}, editor = {B. Siciliano and O. Khatib and Groen, F.} } @inbook {MFB02, title = {Visual-servoed parking with limited view angle}, booktitle = {Experimental Robotics VIII}, series = {Springer Tracts in Advanced Robotics (STAR)}, volume = {5}, year = {2002}, pages = {254-263}, publisher = {Springer Verlag}, organization = {Springer Verlag}, abstract = {

In this paper the problem of stabilizing a wheeled vehicle of unicycle type to a set point, using only visual feedback, is considered. The practically most relevant problem of keeping the tracked features in sight of the camera while maneuvering to park the vehicle is taken into account. This constraint, often neglected in the literature, combines with the nonholonomic nature of the vehicle kinematics in a challenging controller design problem. We provide an effective solution to such problem by using a combination of previous results on non-smooth control synthesis, and recently developed hybrid control techniques. Simulations and experimental results on a laboratory vehicle are reported, showing the practicality of the proposed approach.

}, keywords = {Embedded Control, Robotics}, author = {P. Murrieri and D. Fontanelli and A. Bicchi}, editor = {B. Siciliano and P. Dario} } @conference {CPGB00, title = {Vision-Based Dynamic Estimation and Set-Point Stabilization of Nonholonomic Vehicles}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2000}, pages = {2771-2776}, address = {San Francisco, CA, USA}, keywords = {Autonomous Vehicles, Nonlinear Control Systems, Sensors and Observers, visual servoing}, author = {F. Conticelli and D Prattichizzo and F. Guidi and A. Bicchi} } @conference {BBLP93, title = {A variable structure approach to force/motion control of robot manipulators}, booktitle = {Proc. Int. Conf. FAST - BIAS}, year = {1993}, address = {Milan, Italy, November 23-25 1993}, keywords = {Robotics}, author = {A. Balestrino and A. Bicchi and A. Landi and D Prattichizzo} }