@conference {4135, title = {Grid-Based Stochastic Model Predictive Control for Trajectory Planning in Uncertain Environments}, booktitle = {2020 IEEE 23rd International Conference on Intelligent Transportation Systems (ITSC)}, year = {2020}, pages = {1-8}, doi = {10.1109/ITSC45102.2020.9294388}, author = {T. Br{\"u}digam and F. D. Luzio and L. Pallottino and D. Wollherr and M. Leibold} } @article {3700, title = {Deconfliction of Motion Paths With Traffic Inspired Rules}, journal = {IEEE Robotics and Automation Letters}, volume = {4}, year = {2019}, month = {April}, pages = {2227-2234}, keywords = {Automobiles, Autonomous Vehicles, Collision Avoidance, multi-robot systems, Navigation, Physical Human-Robot Interaction, Roads, Robots, Safety}, issn = {2377-3766}, doi = {10.1109/LRA.2019.2899932}, author = {F. Celi and L. Wang and L. Pallottino and M. Egerstedt} } @conference {3747, title = {The softpro project: Synergy-based open-source technologies for prosthetics and rehabilitation}, booktitle = {International Symposium on Wearable Robotics}, year = {2018}, doi = {https://doi.org/10.1007/978-3-030-01887-0_71}, author = {C. Piazza and M. G. Catalano and M. Bianchi and E. Ricciardi and D. Pratichizzo and S. Haddadin and Luft, A. R. L. and O. Lambercy and R. Gassert and E. Jakubowitz and H. Van Der Kooij and F. Tonis and F. Bonomo and B. de Jonge and T. Ward and K. Zhao and M. Santello and A. Bicchi} } @article {3045, title = {Coordination Control of a Dual-arm Exoskeleton Robot Using Human Impedance Transfer Skills}, journal = {IEEE Trans. Systems Man and Cybernetics: Systems}, year = {2017}, month = {06/2017}, abstract = {

This paper has developed a coordination control method for a dual-arm exoskeleton robot based on human impedance transfer skills, where the left (master) robot arm extracts the human limb impedance stiffness and position profiles, and then transfers the information to the right (slave) arm of the exoskeleton. A computationally efficient model of the arm endpoint stiffness behavior is developed and a co-contraction index is defined using muscular activities of a dominant antagonistic muscle pair. A reference command consisting of the stiffness and position profiles of the operator is computed and realized by one robot in real-time. Considering the dynamics uncertainties of the robotic exoskeleton, an adaptive-robust impedance controller in task space is proposed to drive the slave arm tracking the desired trajectories with convergent errors. To verify the robustness of the developed approach, a study of combining adaptive control and human impedance transfer control under the presence of unknown interactive forces is conducted. The experimental results of this paper suggest that the proposed control method enables the subjects to execute a coordination control task on a dual-arm exoskeleton robot by transferring the stiffness from the human arm to the slave robot arm, which turns out to be effective.

}, keywords = {Robotics}, doi = {10.1109/TSMC.2017.2706694}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7944582}, author = {B. Huang and Z. Li and X. Wu and A. Ajoudani and A. Bicchi and J. Liu} } @article {3214, title = { Enhancing Adaptive Grasping Through a Simple Sensor-Based Reflex Mechanism }, journal = {IEEE Robotics and Automation Letters}, volume = {2}, year = {2017}, month = {07/2017}, pages = {1664 - 1671}, abstract = {

This paper presents an approach to achieve adaptive grasp of unknown objects whose position is only approximately known via point-cloud data. We exploit the adaptability of a soft robotic hand which can autonomously conform to the shape of a grasped object if properly approached. Once a grasp approach has been preliminarily planned based only on rough estimates of the object position, the hand is shaped to a pregrasp configuration. Before closing the hand, a sensor-based algorithm is applied that corrects the relative hand-object posture so as to enhance the probability that the object is uniformly approached by all fingers, thus avoiding undesired premature contacts. The algorithm minimizes the distance between the hand{\textquoteright}s fingerpads and the object by continuously controlling both the wrist pose and orientation and the hand closure. Experimental studies with a Kuka-LWR arm and a Pisa/IIT Softhand illustrate the benefit of the developed technique and the improvement in grasping performance with respect to open-loop execution of grasps planned on the basis of prior RGB-D cues only.

}, keywords = {Haptics, Robotics}, doi = {10.1109/LRA.2017.2681122}, url = {http://ieeexplore.ieee.org/document/7875417/}, author = {Luberto, E. and Y. Wu and G. Santaera and M Gabiccini and A. Bicchi} } @inbook {2714, title = {A Full Body Sensing System for Monitoring Stroke Patients in a Home Environment}, booktitle = {Biomedical Engineering Systems and Technologies: 7th International Joint Conference, BIOSTEC 2014, Angers, France, March 3-6, 2014, Revised Selected Papers}, year = {2016}, pages = {378 - 393}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, keywords = {Bioengineering}, isbn = {978-3-319-26128-7}, doi = {10.1007/978-3-319-26129-4_25}, author = {Klaassen, B. and van Beijnum, B.J.F. and Weusthof, M. H. H. and D. Hofs and van Meulen, F.B. and E. Droog and H. Luinge and S. Laurens and A. Tognetti and F. Lorussi and R. Paradiso and Held, J. and Luft, A. R. L. and Reenalda, J. and Nikamp, C. D. M. and Buurke, J. H. and Hermens, HJ and Veltink, P.} } @article {2904, title = {Variable Stiffness Actuators: Review on Design and Components}, journal = { IEEE/ASME Transactions on Mechatronics }, volume = {21}, year = {2016}, month = {10/2016}, pages = {2418 - 2430}, abstract = {

Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.

}, keywords = {Robotics}, doi = {10.1109/TMECH.2015.2501019}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7330025}, author = {S. Wolf and G. Grioli and O. Eiberger and W. Friedl and M. Grebenstein and H. Hoppner and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and D. Lefeber and S. Stramigioli and N. G. Tsagarakis and M. Van Damme and R. Van Ham and B. Vanderborght and L. C. Visser and A. Bicchi and A Albu-Schaeffer} } @conference {2512, title = {P2SF: Physically-based Point Spread Function for digital image processing}, booktitle = {Imaging Systems and Applications}, year = {2015}, pages = {IT3A{\textendash}5}, publisher = {Optical Society of America}, organization = {Optical Society of America}, keywords = {Bioengineering}, author = {M. Pieroni and B. Wandell and P. Catrysse and D. De Rossi} } @article {2514, title = {Realisation and characterization of conductive hollow fibers for neuronal tissue engineering}, journal = {Journal of Biomedical Materials Research - Part B Applied Biomaterials}, volume = {103}, year = {2015}, pages = {1107-1119}, keywords = {Bioengineering}, author = {Gattazzo, F. and C. De Maria and Whulanza, Y. and Taverni, G. and A. Ahluwalia and G. Vozzi} } @article {2080, title = {Variable Stiffness Actuators: the user{\textquoteright}s point of view}, journal = {Int. J. Robotics Research}, volume = {34}, year = {2015}, note = {

Extensions.zip

}, month = {05/2015}, pages = {727-743}, keywords = {Robotics}, doi = {10.1177/0278364914566515}, url = {http://ijr.sagepub.com/cgi/reprint/0278364914566515v1.pdf?ijkey=anmgudvoLz7ZloP\&keytype=finite}, author = {G. Grioli and S. Wolf and M. Garabini and M. G. Catalano and E. Burdet and D. G. Caldwell and R. Carloni and W. Friedl and M. Grebenstein and M. Laffranchi and D. Lefeber and S. Stramigioli and N G Tsagarakis and M. Van Damme and B. Vanderborght and A Albu-Schaeffer and A. Bicchi} } @conference {2278, title = {Autonomous bioreactor modules for disease models and detection of systemic toxicity}, booktitle = {ALTEX Proceedings}, year = {2014}, pages = {43}, address = {Prague, Czech Republic}, abstract = {

Advanced systems based on bioreactors and scaffolds are an essential step towards the development of more predictive and ethical alternatives to animal experiments. Size, modularity, automation, monitoring and essential design are crucial because these elements will ease the transition from old technology and accelerate their acceptance into mainstream research. Based on these requirements, the interconnected transparent sensorised {\^a}{\texteuro}{\oe}lego{\^a}{\texteuro} bioreactors designed in our labs have been used to generate physiologically relevant disease and toxicity models which recapitulate systemic responses impossible to observe in standard cell cultures. The disease model is an interconnected bioreactor circuit with i) adipose tissue in 3D in 3 different concentrations representing normo-weight, over weight and obese body mass indices, ii) human hepatocytes on porous collagen scaffolds and iii) monolayers of human endothelial cells. High adiposity and elevated glucose levels induce systemic and endothelial inflammation in the circuit, as observed in overweight and diabetic humans (Iori et al., 2012). Using similar technology a three-tissue circuit for monitoring the absorption, distribution, metabolism and toxicity of nanoparticles was developed in the context of the EU project InLiveTox (Ucciferri et al., 2014). The results were strikingly similar to those observed in animal experiments demonstrating that the dynamic 3D in-vitro models are ethical, meaningful and economically viable replacements.

}, keywords = {Bioengineering}, author = {A. Ahluwalia and S. Giusti and Sbrana, T. and M. Wilkinson and A. Misto and Lehr, C.-M. and M. Liley}, editor = {S. Horst and D. J{\'\i}rov{\'a}} } @conference {2215, title = {Daily-life tele-monitoring of motor performance in stroke survivors}, booktitle = {Proceedings of XIII International Symposium on 3D Analysis of Human Movement}, year = {2014}, month = {17 July 2014}, pages = {159{\textendash}162}, abstract = {

The objective of the EU project INTERACTION is to develop an unobtrusive and modular sensing system for objective monitoring of daily-life motor performance of stroke survivors. This will enable clinical professionals to advise their patients about their continued daily-life activity profile and home training, and evaluate and optimize rehabilitation programs.A modular textile-integrated sensing system was developed and performance and capacity measures were proposed and clinically tested in stroke subject.Telemonitoring facilities were developed and tested. In the last stage of the project, the system will be tested during daily-life.

}, author = {Veltink, P.H. and van Meulen, F.B. and van Beijnum, B.J.F. and Klaassen, B. and Hermens, H. J. and Droog, E. and Weusthof, M. H. H. and F. Lorussi and A. Tognetti and Reenalda, J. and Nikamp, C. D. M. and Baten, C. T. M. and Buurke, J. H. and Held, J. and Luft, A. R. L. and Luinge, H. and De Toma, G. and Mancuso, C. and Paradiso, R.} } @conference {2213, title = {Interpreting Psychophysiological States Using Unobtrusive Wearable Sensors in Virtual Reality}, booktitle = {Proc. of The Seventh International Conference on Advances in Computer-Human Interactions}, year = {2014}, abstract = {

One of the main challenges in the study of human be- havior is to quantitatively assess the participants? affective states by measuring their psychophysiological signals in ecologically valid conditions. The quality of the acquired data, in fact, is often poor due to artifacts generated by natural interactions such as full body movements and gestures. We created a technology to address this problem. We enhanced the eXperience Induction Machine (XIM), an immersive space we built to conduct experiments on human behavior, with unobtrusive wearable sensors that measure electrocardiogram, breathing rate and electrodermal response. We conducted an empirical validation where participants wearing these sensors were free to move in the XIM space while exposed to a series of visual stimuli taken from the International Affective Picture System (IAPS). Our main result consists in the quan- titative estimation of the arousal range of the affective stimuli through the analysis of participants? psychophysiological states. Taken together, our findings show that the XIM constitutes a novel tool to study human behavior in life-like conditions.

}, author = {A. Betella and Pacheco, D. and R. Zucca and X. D. Arsiwalla and P Omedas and A Lanata and D. Mazzei and A. Tognetti and A. Greco and N. Carbonaro and Wagner, J. and Lingenfelser, F. and Andr{\`e}, E. and D. De Rossi and Verschure, P.} } @article {2153, title = {Peripheral Machine Interfaces: going beyond traditional surface electromyography}, journal = {Frontiers in Neurorobotics}, volume = {8}, year = {2014}, month = {08/2014}, pages = {1 - 17}, keywords = {Robotics}, doi = {10.3389/fnbot.2014.00022}, author = {C. Castellini and P. Artemiadis and M. Wininger and A. Ajoudani and M. Alimusaj and A. Bicchi and B. Caputo and W. Craelius and S. Dosen and K. Englehart and D. Farina and A. Gijsberts and S. B. Godfrey and L. Hargrove and M. Ison and T. Kuiken and M. Markovic and P. M. Pilarski and R. Rupp and E. Scheme} } @article {2202, title = {Realisation and characterization of conductive hollow fibers for neuronal tissue engineering}, journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials}, year = {2014}, keywords = {Bioengineering}, author = {Gattazzo, F. and C. De Maria and Whulanza, Y. and Taverni, G. and A. Ahluwalia and G. Vozzi} } @article {2204, title = {Smart Sensing Scaffolds}, journal = {Smart Membranes and Sensors: Synthesis, Characterization, and Applications}, year = {2014}, pages = {337}, keywords = {Bioengineering}, author = {C. De Maria and Whulanza, Y. and G. Vozzi and A. Ahluwalia} } @conference {2226, title = {XIM-Engine: a software framework to support the development of interactive applications that uses conscious and unconscious reactions in immersive mixed reality}, booktitle = {VIRTUAL REALITY INTERNATIONAL CONFERENCE}, year = {2014}, abstract = {

The development of systems that allow multimodal interpretation of human-machine interaction is crucial to advance our understanding and validation of theoretical models of user behavior. In particular, a system capable of collecting, perceiving and interpreting unconscious behavior can provide rich contextual information for an interactive system. One possible application for such a system is in the exploration of complex data through immersion, where massive amounts of data are generated every day both by humans and computer processes that digitize information at different scales and resolutions thus exceeding our processing capacity. We need tools that accelerate our understanding and generation of hypotheses over the datasets, guide our searches and prevent data overload. We describe XIM- engine, a bio-inspired software framework designed to capture and analyze multi-modal human behavior in an immersive environment. The framework allows performing studies that can advance our understanding on the use of conscious and unconscious reactions in interactive systems.

}, author = {P. Omedas and A. Betella and Zucca, R. and X. D. Arsiwalla and Pacheco, D. and J. Wagner and F. Lingenfelser and D. Mazzei and A Lanata and A. Tognetti and Goldhoorn, A. and Guerra, E. and Alqu{\`\i}zar, R. and Grau, A. and Sanfeliu, A. and D. De Rossi and E. Andr{\'e} and P. F. M. J. Verschure} } @article {2254, title = {3D CMR Mapping of Metabolism by Hyperpolarized 13C-Pyruvate in Ischemia-Reperfusion}, journal = {JACC-CARDIOVASCULAR IMAGING }, volume = {6}, year = {2013}, pages = {743-744}, doi = {10.1016/j.jcmg.2012.11.023}, author = {Aquaro, G. D. and Frijia, F. and V. Positano and Menichetti, L. and M. F. Santarelli and Ardenkjaer-Larsen, J. H. and Wiesinger, F. and Lionetti, V. and Romano, S. L. and Bianchi, G. and Neglia, D. and G. Giovannetti and Schulte, R. and Recchia, f. A. and L. Landini and Lombardi, M.} } @conference {1812, title = {Advanced Interfaces to Stem the Data Deluge in Mixed Reality: Placing Human (un)consciuosness in the Loop}, booktitle = {ACM SIGGRAPH 2013}, year = {2013}, address = {New York, NY, USA}, keywords = {Bioengineering}, url = {10.1145/2503385.2503460}, author = {A. Betella and E. Mart{\`\i}nez and R. Zucca and X. D. Arsiwalla and P Omedas and S. Wierenga and A. Mura and J. Wagner and F. Lingenfelser and E. Andr{\'e} and D. Mazzei and A. Tognetti and A Lanata and D. De Rossi and P. F. M. J. Verschure} } @article {2256, title = {Design of a quadrature surface coil for hyperpolarized 13C MRS cardiac metabolism studies in pigs}, journal = {CONCEPTS IN MAGNETIC RESONANCE PART B-MAGNETIC RESONANCE ENGINEERING}, volume = {43b}, year = {2013}, pages = {69 - 77}, doi = {10.1002/cmr.b.21235}, author = {G. Giovannetti and Frijia, F. and V. Hartwig and Attanasio, S. and Menichetti, L. and N. Vanello and V. Positano and Ardenkjaer-Larsen, J. H. and Lionetti, V. and Aquaro, G. D. and De Marchi, D. and Schulte, R. and Wiesinger, F. and L. Landini and Lombardi, M. and M. F. Santarelli} } @article {1778, title = {Electrical and Mechanical Characterisation of single wall carbon nanotubes based composites for tissue engineering applications}, journal = {Journal of nanoscience and nanotechnology}, year = {2013}, month = {01/2013}, pages = {188 - 197}, keywords = {Bioengineering}, author = {Whulanza, Y and L. Vannozzi and Vomero, M. and A. Ahluwalia and G. Vozzi} } @conference {1998, title = {A Sensing Architecture for Empathetic Data Systems}, booktitle = {ACM International Conference Proceeding Series}, year = {2013}, month = {7-8 March}, pages = {{\textendash}}, publisher = {ACM Digital Library}, organization = {ACM Digital Library}, doi = {10.1145/2459236.2459253}, url = {http://dx.medra.org/10.1145/2459236.2459253}, author = {J. Wagner and F. Lingenfelser and E. Andr{\'e} and D. Mazzei and A. Tognetti and D. De Rossi and A. Betella and R. Zucca and P Omedas and P. F. M. J. Verschure} } @article {2231, title = {Structured errors in reconstruction methods for Non-Cartesian MR data }, journal = {COMPUTERS IN BIOLOGY AND MEDICINE }, volume = {43}, year = {2013}, month = {12/2013}, pages = {2256-2262}, doi = {10.1016/j.compbiomed.2013.10.013}, author = {Gibiino, F. and V. Positano and Wiesinger, F. and G. Giovannetti and L. Landini and M. F. Santarelli} } @article {2252, title = {Transmit-Only/Receive-Only Radiofrequency System for Hyperpolarized C-13 MRS Cardiac Metabolism Studies in Pigs}, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {1125-1138}, doi = {10.1007/s00723-013-0477-3}, author = {G. Giovannetti and Frijia, F. and V. Hartwig and Menichetti, L. and V. Positano and Ardenkjaer-Larsen, J. H. and Lionetti, V. and Aquaro, G. D. and De Marchi, D. and Schulte, R. and Wiesinger, F. and L. Landini and Lombardi, M. and M. F. Santarelli} } @article {1698, title = {Variable Impedance Actuators: a Review}, journal = {Robotics and Autonomous Systems}, volume = {61}, year = {2013}, note = {

Available online 6 August 2013

}, month = {12/2013}, pages = {1601{\textendash}1614}, abstract = {

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA{\textquoteright}s to be guided in the design and implementation process for their targeted application.

}, keywords = {Robotics, Soft robotics, Variable Impedance Actuators}, url = {http://www.sciencedirect.com/science/article/pii/S0921889013001188}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and O. Eiberger and W. Friedl and G. Ganesh and M. Garabini and M. Grebenstein and G. Grioli and S. Haddadin and H. Hoppner and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {1484, title = {Speech analysis for mood state characterization in bipolar patients}, booktitle = {Engineering in Medicine and Biology Society (EMBC), 2012 Annual International Conference of the IEEE}, year = {2012}, pages = {2104{\textendash}2107}, publisher = {IEEE}, organization = {IEEE}, keywords = {Bioengineering}, author = {N. Vanello and Guidi, A. and C. Gentili and Werner, S. and G. Bertschy and G. Valenza and A Lanata and E. P. Scilingo} } @article {1245, title = {Variable Impedance Actuators: Moving the Robots of Tomorrow}, year = {2012}, keywords = {Robotics}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and G. Ganesh and M. Garabini and G. Grioli and S. Haddadin and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @article {1512, title = {Sensing scaffolds to monitor cellular activity using impedance measurements}, journal = {BIOSENSORS \& BIOELECTRONICS}, year = {2011}, keywords = {Bioengineering}, issn = {0956-5663}, author = {Whulanza, Y and Ucciferri, N and C. Domenici and G. Vozzi and A. Ahluwalia} } @article {1509, title = {Tuning polycaprolactone-carbon nanotube composites for bone tissue engineering scaffolds}, journal = {MATERIALS SCIENCE AND ENGINEERING. C, BIOMIMETIC MATERIALS, SENSORS AND SYSTEMS}, year = {2011}, keywords = {Bioengineering}, issn = {0928-4931}, author = {Mattioli-Belmonte, M. and G. Vozzi and Whulanza, Y and Seggiani, M and Fantauzzi, V and Orsini, G and A. Ahluwalia} } @conference {WPB-ICRA10, title = {Controllability for Pairs of Vehicles Maintaining Constant Distance}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2010)}, year = {2010}, month = {May 3 - 8}, pages = {342 - 349}, address = {Anchorage, Alaska}, keywords = {Embedded Control, Robotics}, author = {H. Wang and L. Pallottino and A. Bicchi} } @conference {WPB_cdc10, title = {Controllability Properties for Aircraft Formations}, booktitle = {International Conference on Decision and Control - CDC 2010}, year = {2010}, pages = {2047 - 2054}, keywords = {Embedded Control, Robotics}, author = {H. Wang and L. Pallottino and A. Bicchi} } @conference {WPb_cdc10_2, title = {Motion planning for Formations of Dubins Vehicles}, booktitle = {International Conference on Decision and Control - CDC 2010}, year = {2010}, pages = {2263 - 2269}, keywords = {Embedded Control, Robotics}, author = {H. Wang and L. Pallottino and A. Bicchi} } @conference {1530, title = {Sensorised "Smart" Scaffold to Monitor Cell Processes Based on Impedance Characteristics}, booktitle = {Congresso Nazionale di Bioingegneria 2010}, year = {2010}, keywords = {Bioengineering}, author = {Whulanza, Y and Ucciferri, N and G. Vozzi and A. Ahluwalia and C. Domenici} } @article {2017, title = {Smart Garments for Emergency Operators: The ProeTEX Project}, journal = {IEEE TRANSACTIONS ON INFORMATION TECHNOLOGY IN BIOMEDICINE}, volume = {14}, year = {2010}, pages = {694{\textendash}701}, issn = {1089-7771}, doi = {10.1109/TITB.2010.2045003}, url = {http://dx.medra.org/10.1109/TITB.2010.2045003}, author = {Curone, D. and Secco, E. L. and A. Tognetti and G. Loriga and Dudnik, G. and Risatti, M. and Whyte, R. and Bonfiglio, A. and G. Magenes} } @article {1748, title = {Pyroelectric sensing station for automatic recognition of position and orientation of objects}, journal = {INTERNATIONAL JOURNAL OF MACHINE TOOL DESIGN \& RESEARCH}, volume = {24}, year = {1984}, pages = {145{\textendash}160}, keywords = {Bioengineering}, issn = {0020-7357}, author = {L.R Wang and P. Dario and D. De Rossi and R. Francesconi and P. C. Pinotti} } @article {1733, title = {Touch-sensitive polymer skin uses piezoelectric properties to recognize orientation of objects}, journal = {SENSOR REVIEW}, volume = {4}, year = {1982}, pages = {194{\textendash}198}, keywords = {Bioengineering}, issn = {0260-2288}, author = {P. Dario and R. Bardelli and D. De Rossi and L.R Wang and P. C. Pinotti} }