@article {4376, title = {Force/Torque-Sensorless Joint Stiffness Estimation in Articulated Soft Robots}, journal = {IEEE ROBOTICS AND AUTOMATION LETTERS}, year = {2022}, month = {05/2022}, abstract = {

Currently, the access to the knowledge of stiffness values is typically constrained to a-priori identified models or datasheet information, which either do not usually take into account the full range of possible stiffness values or need extensive experiments. This work tackles the challenge of stiffness estimation in articulated soft manipulators, and it proposes an innovative solution adding value to the previous research by removing the necessity for force/torque sensors and generalizing to multi-degree-of-freedom robots. Built upon the theory of unknown input-state observers and recursive least-square algorithms, the solution is independent of the actuator model parameters and its internal control signals. The validity of the approach is proven analytically for single and multiple degree-offreedom robots. The obtained estimators are first evaluated via simulations on articulated soft robots with different actuations and then tested in experiments with real robotic setups using antagonistic variable stiffness actuators.

}, keywords = {Calibration and Identification, Compliant Joints and Mechanisms, Flexible Robots, Safety in HRI}, author = {Maja Trumic and Giorgio Grioli and Kosta Jovanovic and Adriano Fagiolini} } @conference {3747, title = {The softpro project: Synergy-based open-source technologies for prosthetics and rehabilitation}, booktitle = {International Symposium on Wearable Robotics}, year = {2018}, doi = {https://doi.org/10.1007/978-3-030-01887-0_71}, author = {C. Piazza and M. G. Catalano and M. Bianchi and E. Ricciardi and D. Pratichizzo and S. Haddadin and Luft, A. R. L. and O. Lambercy and R. Gassert and E. Jakubowitz and H. Van Der Kooij and F. Tonis and F. Bonomo and B. de Jonge and T. Ward and K. Zhao and M. Santello and A. Bicchi} } @article {2844, title = {Assessment of Myoelectric Controller Performance and Kinematic Behavior of a Novel Soft Synergy-inspired Robotic Hand for Prosthetic Applications}, journal = {Frontiers in Neurorobotics}, volume = {10}, year = {2016}, month = {10/2016}, abstract = {

Myoelectric-artificial limbs can significantly advance the state of the art in prosthetics, since they can be used to control mechatronic devices through muscular activity in a way that mimics how the subjects used to activate their muscles before limb loss. However, surveys indicate that dissatisfaction with the functionality of terminal devices underlies the widespread abandonment of prostheses. We believe that one key factor to improve acceptability of prosthetic devices is to attain human-likeness of prosthesis movements, a goal which is being pursued by research on social and human-robot interactions. Therefore, to reduce early abandonment of terminal devices, we propose that controllers should be designed such as to ensure effective task accomplishment in a natural fashion. In this work, we have analyzed and compared the performance of three types of myoelectric controller algorithms based on surface electromyography to control an under-actuated and multi-degrees of freedom prosthetic hand, the SoftHand Pro. The goal of the present study was to identify the myoelectric algorithm that best mimics the native hand movements. As a preliminary step, we first quantified the repeatability of the SoftHand Pro finger movements and identified the electromyographic recording sites for able-bodied individuals with the highest signal-to-noise ratio from two pairs of muscles, i.e. flexor digitorum superficialis/extensor digitorum communis, and flexor carpi radialis/extensor carpi ulnaris. Able-bodied volunteers were then asked to execute reach-to-grasp movements, while electromyography signals were recorded from flexor digitorum superficialis/extensor digitorum communis as this was identified as the muscle pair characterized by high signal-to-noise ratio and intuitive control. Subsequently, we tested three myoelectric controllers that mapped electromyography signals to position of the SoftHand Pro. We found that a differential electromyography-to-position mapping ensured the highest coherence with hand movements. Our results represent a first step towards a more effective and intuitive control of myoelectric hand prostheses.

}, keywords = {Haptics, Robotics}, doi = {10.3389/fnbot.2016.00011}, url = {https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5066092/}, author = {S. Fani and M. Bianchi and S. Jain and J. Pimenta Neto and S. Boege and G. Grioli and A. Bicchi and M. Santello} } @article {2652, title = {Hand synergies: Integration of robotics and neuroscience for understanding the control of biological and artificial hands}, journal = {Physics of Life Reviews}, volume = {17}, year = {2016}, month = {07/2016}, pages = {1-23}, keywords = {Haptics, Robotics}, url = {http://www.sciencedirect.com/science/article/pii/S1571064516000269}, author = {M. Santello and M. Bianchi and M Gabiccini and E. Ricciardi and G. Salvietti and D Prattichizzo and M. Ernst and A. Moscatelli and H. Jorntell and A. Kappers and K. Kyriakopulos and A Albu-Schaeffer and C. Castellini and A. Bicchi} } @conference {2278, title = {Autonomous bioreactor modules for disease models and detection of systemic toxicity}, booktitle = {ALTEX Proceedings}, year = {2014}, pages = {43}, address = {Prague, Czech Republic}, abstract = {

Advanced systems based on bioreactors and scaffolds are an essential step towards the development of more predictive and ethical alternatives to animal experiments. Size, modularity, automation, monitoring and essential design are crucial because these elements will ease the transition from old technology and accelerate their acceptance into mainstream research. Based on these requirements, the interconnected transparent sensorised {\^a}{\texteuro}{\oe}lego{\^a}{\texteuro} bioreactors designed in our labs have been used to generate physiologically relevant disease and toxicity models which recapitulate systemic responses impossible to observe in standard cell cultures. The disease model is an interconnected bioreactor circuit with i) adipose tissue in 3D in 3 different concentrations representing normo-weight, over weight and obese body mass indices, ii) human hepatocytes on porous collagen scaffolds and iii) monolayers of human endothelial cells. High adiposity and elevated glucose levels induce systemic and endothelial inflammation in the circuit, as observed in overweight and diabetic humans (Iori et al., 2012). Using similar technology a three-tissue circuit for monitoring the absorption, distribution, metabolism and toxicity of nanoparticles was developed in the context of the EU project InLiveTox (Ucciferri et al., 2014). The results were strikingly similar to those observed in animal experiments demonstrating that the dynamic 3D in-vitro models are ethical, meaningful and economically viable replacements.

}, keywords = {Bioengineering}, author = {A. Ahluwalia and S. Giusti and Sbrana, T. and M. Wilkinson and A. Misto and Lehr, C.-M. and M. Liley}, editor = {S. Horst and D. J{\'\i}rov{\'a}} } @conference {2119, title = {Haptic Exploration of Unknown Surfaces with Discontinuities}, booktitle = {Proc. IEEE/RSJ Intl Conf. on Intelligent Robots and Systems (IROS 2014)}, year = {2014}, month = {09/2014}, pages = {1255 - 1260}, address = {Chicago, USA}, keywords = {Haptics, Robotics}, doi = {10.1109/IROS.2014.6942718}, url = {http://kormushev.com/papers/Jamisola_IROS-2014.pdf}, author = {Jamisola, R. S. and Kormushev, P. and A. Bicchi and D. G. Caldwell} } @article {1492, title = {Bone scaffolds with homogeneous and discrete gradient mechanical properties}, journal = {MATERIALS SCIENCE AND ENGINEERING. C, BIOMIMETIC MATERIALS, SENSORS AND SYSTEMS}, volume = {1}, year = {2013}, pages = {28{\textendash}36}, keywords = {Bioengineering}, issn = {0928-4931}, author = {Jelen, C. and G. Mattei and F. Montemurro and C. De Maria and Mattioli-Belmonte, M. and G. Vozzi} } @article {1698, title = {Variable Impedance Actuators: a Review}, journal = {Robotics and Autonomous Systems}, volume = {61}, year = {2013}, note = {

Available online 6 August 2013

}, month = {12/2013}, pages = {1601{\textendash}1614}, abstract = {

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA{\textquoteright}s to be guided in the design and implementation process for their targeted application.

}, keywords = {Robotics, Soft robotics, Variable Impedance Actuators}, url = {http://www.sciencedirect.com/science/article/pii/S0921889013001188}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and O. Eiberger and W. Friedl and G. Ganesh and M. Garabini and M. Grebenstein and G. Grioli and S. Haddadin and H. Hoppner and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @article {1245, title = {Variable Impedance Actuators: Moving the Robots of Tomorrow}, year = {2012}, keywords = {Robotics}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and G. Ganesh and M. Garabini and G. Grioli and S. Haddadin and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @article {arz+07ejc, title = {A component-based approach to the design of networked control systems}, journal = {European Journal of Control}, volume = {13}, number = {2{\textendash}3}, year = {2007}, note = {

Invited paper

}, pages = {261-279}, abstract = {

Component-based techniques revolve around composable, reusable software objects that shield the application level software from the details of the hardware and lowlevel software implementation and vice versa. Components provide many benefits that have led to their wide adoption in software and middleware developed for embedded systems: They are well-defined entities that can be replaced without affecting the rest of the systems, they can be developed and tested separately and integrated later, and they are reusable. Clearly such features are important for the design of large-scale complex systems more generally, beyond software architectures. We propose the use of a component approach to address embedded control problems. We outline a general componentbased framework to embedded control and show how it can be instantiated in specific problems that arise in the control over/of sensor networks. Building on the middleware component framework developed under the European project RUNES, we develop a number of control-oriented components necessary for the implementation of control applications and design their integration. The paper provides the overview of the approach, discusses a real life application where the approach has been tested and outlines a number of specific control problems that arise in this application.

}, keywords = {Embedded Control, Robotics}, author = {K -E Arz{\'e}n and A. Bicchi and G. Dini and S. Hailes and K. H. Johansson and J. Lygeros and A. Tzes} } @conference {LJB07, title = {An experimental study of exploiting multipath fading for robot communications}, booktitle = {Proceedings of Robotics: Science and Systems}, year = {2007}, month = {June}, address = {Atlanta, GA, USA}, abstract = {

A simple approach for mobile robots to exploit multipath fading in order to improve received radio signal strength (RSS), is presented. The strategy is to sample the RSS at discrete points, without deviating too far from the desired position. We first solve the problem of how many samples are needed for given communications performance and how they should be spaced. Second, we propose a circular and a grid trajectory for sampling and give lower bounds on how many samples they will yield. Third, we estimate the parameters of our strategy from measurements. Finally we demonstrate the validity of our analysis through experiments.

}, keywords = {Robotics}, author = {M. Lindh{\`e} and K. H. Johansson and A. Bicchi} } @conference {TSCHPAJOcdc06, title = {Cascaded lemma for set-stable systems}, booktitle = {Proc. IEEE Int. Conf. on Decision and Control}, year = {2006}, month = {December}, address = {San Diego, USA}, abstract = {

A previous result about uniform global asymptotic stability (UGAS) of the equilibrium of a cascaded time-varying systems, is here also shown to hold for closed (not necessarily compact) sets composed by set-stable subsystems of a cascade. In view of this result an optimal control allocation approach is discussed.

}, keywords = {Robotics}, author = {J. Tsonnas and A. Chaillet and E. Panteley and T. A. Johansen} } @conference {CACSD06, title = {On the Design and Control of Wireless Networked Embedded Systems}, booktitle = {Int. Conf. on Computer Aided Control System Design - CACSD{\textquoteright}06}, year = {2006}, pages = {440-445}, publisher = {IEEE}, organization = {IEEE}, abstract = {

Wireless networked embedded systems are becoming increasingly important in a wide area of technical fields. In this tutorial paper we present recent results on design and control of these systems developed within the project Reconfigurable Ubiquitous Networked Embedded Systems (RUNES), which is an European Integrated Project with the aim to control complexity in networked embedded systems by developing robust and scalable middleware systems. New components for control under varying network conditions are discussed for the RUNES architecture. The complexity of the closed-loop system is increased due to the coupling with the disturbances introduced by the communication system. The network may introduce additional delays, jitter, data rate limitations, packet losses etc. Experimental work on integration test beds that demonstrates these results is shown together with motivating links to the RUNES disaster relief tunnel scenario.

}, keywords = {Embedded Control, Robotics}, author = {K -E Arz{\'e}n and A. Bicchi and S. Hailes and K. H. Johansson and J. Lygeros} } @conference {PPBJ04, title = {Control of Distributed Embedded Systems in the Presence of Unknown{\textendash}but{\textendash}Bounded Noise}, booktitle = {Proc. IEEE Int. Conf. on Decision and Control}, year = {2004}, pages = {1448-1453}, abstract = {

In this paper we consider the problem of controlling multiple scalar systems through a limited capacity shared channel. Each system is affected by process noise and can be controlled byactuators with values in a {\em fixed}inite set. The control objective is to bound the evolution of the systems in specified sets (controlled invariance). Our goal is to find an optimal allocation of the shared communication resource to the different control activities and to identify correct choices for the design parameters. The paper provides fundamental conceptual tools to attack the design problem in the formal framework of an optimization problem. Namely, we give a feasibility criterion to decide whether a set of design parameters conforms with a control specification (i.e., with the controlled invariance of a specified set for each system). Moreover, we offer the explicit computation of the minimum bit rate necessary for the controlled invariance of a set, which is of utmost importance for solving the optimization problem.

}, keywords = {Embedded Control, Robotics}, author = {B. Picasso and L. Palopoli and A. Bicchi and K. H. Johansson} } @conference {CPTSLDGGBVG-04, title = {Development of a Wearable System Based on Smart Textiles and GPRS Transmission for Remote Multiparametric Monitoring of Cardiac Patients: Preliminary Results of the WEALTHY Project}, booktitle = {THE 5th International Heart Health Conference}, year = {2004}, month = {June}, address = {Milan, Italy}, keywords = {Bioengineering}, author = {S. Coli and R. Paradiso and N. Taccini and E. P. Scilingo and G. Loriga and D. De Rossi and A. Gemignani and B. Ghelarducci and L. Bourdon and A. Ditmar and T. Vavouras and B. Gros and J. Luprano and M. Jaenecke and C. Coucke and G. Delhomme and D. Cianflone} } @conference {BJPP, title = {Quantised Control in Distributed Embedded Systems.}, booktitle = {Proc. 16th Int. Symp. on Mathematical Theory of Networks and Systems}, year = {2004}, abstract = {

Traditional control design is based on ideal assumptions concerning the amount, type and accuracy of the information flow that can be circulated across the controller. Unfortunately, real implementation platforms exhibit non-idealities that may substantially invalidate such assumptions. As a result, the system’s closed-loop performance can be severely affected and sometimes stability itself is jeopardised. These problems show up with particular strength when multiple feedback loops share a limited pool of computation and communication resources. In this case the designer is confronted with the challenging task of choosing at the same time the control law and the optimal allocation policy for the shared resources (control algortihm/system architecture co-design).

}, keywords = {Embedded Control, Robotics}, author = {A. Bicchi and K. H. Johansson and L. Palopoli and B. Picasso} } @article {1413, title = {Acoustic estimation of seafloor parameters: A radial basis functions approach}, journal = {THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA}, volume = {100}, year = {1996}, pages = {1473{\textendash}1481}, issn = {0001-4966}, doi = {10.1142/S0218396X96000088}, url = {http://dx.medra.org/10.1142/S0218396X96000088}, author = {A. Caiti and S. M. Jesus} } @article {1414, title = {Estimating geoacoustic bottom properties from towed array data}, journal = {JOURNAL OF COMPUTATIONAL ACOUSTICS}, volume = {4}, year = {1996}, pages = {273{\textendash}290}, issn = {0218-396X}, doi = {10.1142/S0218396X96000088}, url = {http://dx.medra.org/10.1142/S0218396X96000088}, author = {S. M. Jesus and A. Caiti} } @article {1415, title = {Geoacoustic seafloor exploration with a towed array in a shallow water area of the Strait of Sicily}, journal = {IEEE JOURNAL OF OCEANIC ENGINEERING}, volume = {21}, year = {1996}, pages = {355{\textendash}366}, issn = {0364-9059}, doi = {10.1109/48.544046}, url = {http://dx.medra.org/10.1109/48.544046}, author = {A. Caiti and S. M. Jesus and A. Kristensen} }