@article {1630,
	title = {Electroactive Carbon Nanotube Actuators: Soft-Lithographic Fabrication and Electro-chemical Modelling},
	journal = {MATERIALS SCIENCE AND ENGINEERING. C, BIOMIMETIC MATERIALS, SENSORS AND SYSTEMS},
	year = {2008},
	pages = {{\textendash}},
	keywords = {Bioengineering},
	issn = {0928-4931},
	author = {A. Mazzoldi and M. Tesconi and A. Tognetti and W. Rocchia and G. Vozzi and G. Pioggia and A. Ahluwalia and D. De Rossi}
}
@article {1280,
	title = {Osmolality control by inhalation or micro-infusions?},
	journal = {WIT Transactions on Biomedicine and Health},
	volume = {9},
	year = {2005},
	pages = {559-570},
	abstract = {<p>A model of osmolarity is proposed in this paper. This model represents a typical example of embedded physiological feedback control in physiology. Extensive simulation tests with a compartmental approach (using the specific software SAAM II) have been performed, showing that the model agrees with the findings published in the literature of endocrine physiology and with medical practice. As a relevant example of application of the models, the diabetes insipidus pathology was considered. In the case of central insipidus diabetes, it is possible to predict effects of a therapy, giving out synthetic ADH (where ADH is the antidiuretic hormone, the vasopressine) for restoring homeostatic conditions. Two kinds of therapy were considered: supply by inhalation or by microinfusion. In the first case, we evaluated the effect of inhalation using a two compartmental model to describe the effect of commercial drug (minirin, that means desmopressine acetate), and compared results with data existing in the literature. In the second case, the aim was to have a helping tool in the study and development of micro-infusors with sensors and controllers embedded so as to be able to release a controlled drug quantity, accorded to the patient and optimized for avoiding hyper- or ipo-concentrations of plasma ADH hormone. In this case, we used a mono-compartmental model, considering that the drug is infused directly in the plasma; results are again compared with data existing in the literature and with experimental data.</p>
},
	keywords = {Bioengineering},
	author = {Ciofani, G. and A. Landi and D. Mazzei and A. Mazzoldi}
}
@conference {1266,
	title = {Physiological Cybernetics: Model of Osmolality and Volemia},
	booktitle = {Proc. and 2005 European Control Conf. Decision and Control CDC-ECC {\textquoteright}05. 44th IEEE Conf},
	year = {2005},
	pages = {5552{\textendash}5557},
	keywords = {Bioengineering},
	doi = {10.1109/CDC.2005.1583046},
	author = {Ciofani, G. and A. Landi and D. Mazzei and A. Mazzoldi}
}
@inbook {DLMOS03,
	title = {Active dressware: wearable kinesthetic systems},
	booktitle = {Sensor and sensing in biology and engineering},
	year = {2003},
	pages = {379-392},
	publisher = {Springer Wien},
	organization = {Springer Wien},
	keywords = {Bioengineering},
	author = {D. De Rossi and F. Lorussi and A. Mazzoldi and P. Orsini and E. P. Scilingo}
}
@article {DCLMPS03,
	title = {Electroactive Fabrics And Wearable Biomonitoring Devices},
	journal = {AUTEX Research Journal},
	volume = {3},
	number = {4},
	year = {2003},
	month = {December},
	pages = {180-185},
	keywords = {Bioengineering},
	author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and R. Paradiso and E. P. Scilingo and A. Tognetti}
}
@article {SLMD03,
	title = {Strain-Sensing Fabrics for Wearable Kinaesthetic-Like Systems},
	journal = {IEEE Sensors Journal},
	volume = {3},
	number = {4},
	year = {2003},
	month = {August},
	pages = {460-467},
	keywords = {Bioengineering},
	author = {E. P. Scilingo and F. Lorussi and A. Mazzoldi and D. De Rossi}
}
@conference {TCLMOSTD-03,
	title = {Wearable Sensory-Motor Orthoses for Tele-Rehabilitation},
	booktitle = {25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society},
	year = {2003},
	month = {September},
	pages = {3724-3727},
	address = {Cancun,Mexico},
	keywords = {Bioengineering},
	author = {A. Tognetti and F. Carpi and F. Lorussi and A. Mazzoldi and P. Orsini and E. P. Scilingo and M. Tesconi and D. De Rossi}
}
@conference {DLMOS-02,
	title = {Active dressware: Wearable kinestetic system},
	booktitle = {International Interactive Textiles for the Warrior Conference},
	year = {2002},
	month = {July},
	address = {Boston, USA},
	keywords = {Bioengineering},
	author = {D. De Rossi and F. Lorussi and A. Mazzoldi and P. Orsini and E. P. Scilingo}
}
@conference {DCLMST-02,
	title = {Electroactive Fabrics for Distributed, Conformable and Interactive Systems},
	booktitle = {The first IEEE International Conference on Sensors},
	year = {2002},
	month = {June},
	pages = {1608-1613},
	address = {Orlando, Florida},
	keywords = {Bioengineering},
	author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and E. P. Scilingo and A. Tognetti}
}
@conference {DCLMST-02,
	title = {Electroactive Fibers and Fabrics for Distributed, Conformable and Interactive Systems},
	booktitle = {Proceedings of the First European Workshop on Structural Health Monitoring},
	year = {2002},
	month = {July},
	address = {Cachan, France},
	keywords = {Bioengineering},
	author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and E. P. Scilingo and A. Tognetti}
}
@article {MDLSP02,
	title = {Smart textiles for wearable motion capture systems},
	journal = {AUTEX Research Journal},
	volume = {2},
	number = {4},
	year = {2002},
	month = {December},
	pages = {199-203},
	keywords = {Bioengineering},
	author = {A. Mazzoldi and D. De Rossi and F. Lorussi and E. P. Scilingo and R. Paradiso}
}
@conference {DLMWS-01,
	title = {Strain-amplified electroactive polymer actuator for haptic interfaces},
	booktitle = {Proceedings of SPIE},
	year = {2001},
	month = {July},
	pages = {43-53},
	address = {Newport Beach, USA},
	keywords = {Bioengineering, Haptics},
	author = {D. De Rossi and F. Lorussi and A. Mazzoldi and W. Rocchia and E. P. Scilingo}
}
