@article {4376, title = {Force/Torque-Sensorless Joint Stiffness Estimation in Articulated Soft Robots}, journal = {IEEE ROBOTICS AND AUTOMATION LETTERS}, year = {2022}, month = {05/2022}, abstract = {

Currently, the access to the knowledge of stiffness values is typically constrained to a-priori identified models or datasheet information, which either do not usually take into account the full range of possible stiffness values or need extensive experiments. This work tackles the challenge of stiffness estimation in articulated soft manipulators, and it proposes an innovative solution adding value to the previous research by removing the necessity for force/torque sensors and generalizing to multi-degree-of-freedom robots. Built upon the theory of unknown input-state observers and recursive least-square algorithms, the solution is independent of the actuator model parameters and its internal control signals. The validity of the approach is proven analytically for single and multiple degree-offreedom robots. The obtained estimators are first evaluated via simulations on articulated soft robots with different actuations and then tested in experiments with real robotic setups using antagonistic variable stiffness actuators.

}, keywords = {Calibration and Identification, Compliant Joints and Mechanisms, Flexible Robots, Safety in HRI}, author = {Maja Trumic and Giorgio Grioli and Kosta Jovanovic and Adriano Fagiolini} } @article {4224, title = {Time-resolved Brain-to-Heart Probabilistic Information Transfer Estimation Using Inhomogeneous Point-Process Models}, journal = {IEEE Transactions on Biomedical Engineering}, year = {2021}, author = {Catrambone, Vincenzo and Talebi, Alireza and Barbieri, Riccardo and Valenza, Gaetano} } @article {4271, title = {WRAPP-up: A Dual-Arm Robot for Intralogistics}, journal = {IEEE Robotics Automation Magazine}, volume = {28}, year = {2021}, pages = {50-66}, abstract = {

The diffusion of e-commerce has produced larger and larger volumes of varying items to be handled in warehouses, with the effect that the need for picking automation is increasing. Conventionally, automation has been achieved through a custom plant designed for large-scale production of items having well-established characteristics that are expected to change slowly and to only a small degree over time. However, today the challenge is to realize a solution that is flexible enough to handle goods with different shapes, sizes, and physical properties and that require different grasping modes. To solve this problem, we first analyzed how humans perform picking and then synthesized their behavior according to four main tactics. These were then used as guidelines for the design, planning, and control of WRAPP-up, a dual-arm robot composed of two anthropomorphic manipulators: a Pisa/IIT SoftHand and a velvet tray (Figure 1). The system has been validated and evaluated through extensive experimental tests.

}, doi = {10.1109/MRA.2020.3015899}, url = {https://ieeexplore.ieee.org/document/9212558?fbclid=IwAR05rgEATvdOFrtQWMrNKMrGHGfvtKE4MEKcj3i9pb6KAI4XTdhMqaq7MNc}, author = {Garabini, Manolo and Caporale, Danilo and Tincani, Vinicio and Palleschi, Alessandro and Gabellieri, Chiara and Gugliotta, Marco and Settimi, Alessandro and Catalano, Manuel Giuseppe and Grioli, Giorgio and Pallottino, Lucia} } @article {4085, title = {Exploring augmented grasping capabilities in a multi-synergistic soft bionic hand}, journal = {Journal of NeuroEngineering and Rehabilitation}, volume = {17}, year = {2020}, chapter = {116}, doi = {https://doi.org/10.1186/s12984-020-00741-y}, url = {https://jneuroengrehab.biomedcentral.com/articles/10.1186/s12984-020-00741-y$\#$article-info}, author = {C. Piazza and A. M. Simon and K. L. Turner and L. A. Miller and M. G. Catalano and A. Bicchi and L. Hargrove} } @conference {3708, title = {Dynamic motion control of multi-segment soft robots using piecewise constant curvature matched with an augmented rigid body model}, booktitle = {RoboSoft 2019 - 2019 IEEE International Conference on Soft Robotics }, year = {2019}, author = {R. K. Katzschmann and C. D. Santina and Y. Toshimitsu and A. Bicchi and D. Rus} } @conference {3150, title = {A real-time identification and tracking method for the musculoskeletal model of human arm}, booktitle = {2018 IEEE International Conference on Systems, Man, and Cybernetics (SMC) }, year = {2019}, author = {C. Fang and A. Ajoudani and A. Bicchi and N. G. Tsagarakis} } @article {3377, title = {Aerial Co-Manipulation With Cables: The Role of Internal Force for Equilibria, Stability, and Passivity}, journal = {IEEE Robotics and Automation Letters}, volume = {3}, year = {2018}, month = {July}, pages = {2577-2583}, keywords = {Admittance, Aerial systems: mechanics and control, distributed robot systems, Force, mobile manipulation, multi-robot systems, Robot kinematics, Stability criteria, Transportation}, doi = {10.1109/LRA.2018.2803811}, author = {M. Tognon and C. Gabellieri and L. Pallottino and A. Franchi} } @conference {3724, title = {Approximate hybrid model predictive control for multi-contact push recovery in complex environments}, booktitle = {IEEE RAS International Conference on Humanoid Robots}, year = {2018}, doi = { 10.1109/HUMANOIDS.2017.8239534}, author = {T. Marcucci and R. Deits and M. Gabiccini and A. Bicchi and R. Tedrake} } @article {3679, title = {Design and proof of concept for multi degree of freedom hydrostatically coupled dielectric elastomer actuators with roto-translational kinematics for object handling}, journal = {Smart Materials and Structures}, year = {2018}, author = {A. De Acutis and L. Calabrese and A. Bau and V. Tincani and N. M. Pugno and A. Bicchi and D. De Rossi} } @article {3446, title = {Humanoids at Work: The WALK-MAN Robot in a Postearthquake Scenario}, journal = {IEEE Robotics Automation Magazine}, year = {2018}, pages = {1-1}, keywords = {Buildings, Earthquakes, Hardware, Legged locomotion, Robot sensing systems, Task analysis}, issn = {1070-9932}, doi = {10.1109/MRA.2017.2788801}, author = {F. Negrello and A Settimi and D. Caporale and G. Lentini and M. Poggiani and D. Kanoulas and L. Muratore and Luberto, E. and G. Santaera and L. Ciarleglio and L. Ermini and L. Pallottino and D. G. Caldwell and N. Tsagarakis and A. Bicchi and M. Garabini and M. G. Catalano} } @article {3448, title = {Simplifying Telerobotics: Wearability and Teleimpedance Improves Human-Robot Interactions in Teleoperation}, journal = {IEEE Robotics Automation Magazine}, volume = {25}, year = {2018}, month = {March}, pages = {77-88}, keywords = {application fields, augmented teleoperation, Autonomous robots, communication, effective design, effective simplification, environmental constraints, feedback, Force feedback, fundamental requirement, haptic feedback devices, haptic interfaces, human workspace, human-robot interaction, human-robot interactions, human-robot interfaces, ideal scenario, integrated approach, integrated interface, integrated system, interaction forces, intuitive information exchange, Kinematics, KUKA lightweight robotic arm, lightweight design, manipulators, master, position control, reduced versions, Robot sensing systems, robotic devices, robotic hand-arm system, robotic manipulator, robotic teleoperation, simplified information exchange, slave robot, stiffness control, synergy, Task analysis, teleimpedance techniques, Telemedicine, teleoperator system, telerobotics, TI control, vision, wearability, wearable feedback, wearable hand/arm}, issn = {1070-9932}, doi = {10.1109/MRA.2017.2741579}, author = {S. Fani and S. Ciotti and M. G. Catalano and G. Grioli and A. Tognetti and G. Valenza and A. Ajoudani and M. Bianchi} } @article {3697, title = {The SoftHand Pro: Functional evaluation of a novel, flexible, and robust myoelectric prosthesis}, journal = {PLOS One}, year = {2018}, author = {S. B. Godfrey and K. Zhao and A. Theuer and M. G. Catalano and M. Bianchi and R. Breighner and D. Bhaskaran and R. Lennon and G. Grioli and M. Santello and A. Bicchi and K. Andrews} } @conference {3747, title = {The softpro project: Synergy-based open-source technologies for prosthetics and rehabilitation}, booktitle = {International Symposium on Wearable Robotics}, year = {2018}, doi = {https://doi.org/10.1007/978-3-030-01887-0_71}, author = {C. Piazza and M. G. Catalano and M. Bianchi and E. Ricciardi and D. Pratichizzo and S. Haddadin and Luft, A. R. L. and O. Lambercy and R. Gassert and E. Jakubowitz and H. Van Der Kooij and F. Tonis and F. Bonomo and B. de Jonge and T. Ward and K. Zhao and M. Santello and A. Bicchi} } @conference {3562, title = {A Study on Force-Based Collaboration in Flying Swarms}, booktitle = {Proc. of Swarm Intelligence}, year = {2018}, pages = {3{\textendash}15}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-00533-7}, author = {C. Gabellieri and M. Tognon and L. Pallottino and A. Franchi} } @conference {3683, title = {Touch-Based Grasp Primitives for Soft Hands: Applications to Human-to-Robot Handover Tasks and Beyond}, booktitle = {2018 IEEE International Conference on Robotics and Automation (ICRA)}, year = {2018}, author = {M. Bianchi and G. Averta and E. Battaglia and C. Rosales and M. Bonilla and A. Tondo and M. Poggiani and G. Santaera and S. Ciotti and M. G. Catalano and A. Bicchi} } @inbook {3381, title = {WALK-MAN Humanoid Platform}, booktitle = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, volume = {121}, number = {The DARPA Robotics Challenge Finals: Humanoid Robots To The Rescue}, year = {2018}, pages = {495{\textendash}548}, publisher = {Springer}, organization = {Springer}, doi = {10.1007/978-3-319-74666-1_13}, author = {N. G. Tsagarakis and F. Negrello and M. Garabini and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and M. G. Catalano and M. Ferrati and L. Muratore and P. Kryczka and E. Mingo Hoffman and A Settimi and A. Rocchi and A. Margan and S. Cordasco and D. Kanoulas and A. Cardellino and L. Natale and H. Dallali and J. Malzahn and N. Kashiri and V. Varricchio and L. Pallottino and C. Pavan and J. Lee and A. Ajoudani and D. G. Caldwell and A. Bicchi} } @conference {3222, title = {Characterization of Hand Movements using a Sensing Glove in Hand Assisted Laparoscopic Surgery}, booktitle = {Proceedings of the second International Conference on Medical Information and Bioengineering}, year = {2017}, abstract = {

The past thirty years have seen increasingly rapid advances in the field of laparoscopic surgery, in part because of the use of robots. A well-known example is the da Vinci surgical system. However, far too little attention has been paid to Hand Assisted Laparoscopic Surgery (HALS), a surgery in which the surgeon introduces the non-dominant hand into the abdomen of the patient. The risk of collision between the hand of the surgeon and the tool moved by the robot is the reason why these robots for laparoscopic surgery are not appropriate for HALS. On the other hand, in recent years, there has been an increasing interest in wearables, which have been introduced in our daily life. This interest and the lack of surgery robots for HALS are the reasons to develop a sensing glove which co-works whit a collaborative robot in this kind of surgery. The aim of this paper is to study the use of a sensing glove which will provide information of the movements of the surgeon{\quotesinglbase}{\"A}{\^o}s hand to the collaborative robot. This information determinates the actions that the robot will carry on. The first step was to define different movements of the hand which could be identified. An algorithm identifies these movements using the data given by the sensing glove. For the purpose of algorithm accuracy measurement, 4 persons wearing the sensing glove made a sequence with different movements. The evidence from this study suggests that a sensing glove can be used to send information of the movements of the surgeon{\quotesinglbase}{\"A}{\^o}s hand to a collaborative robot during a HALS.

}, author = {L. Santos and N. Carbonaro and A. Tognetti and Gonzales, R. and J. C. Fraile and J. P. Turiel and E. De La Fuente} } @article {3153, title = {Choosing Poses for Force and Stiffness Control}, journal = {IEEE Transactions on Robotics}, year = {2017}, month = {06/2017}, abstract = {

In humanoids and other redundant robots interacting with the environment, one can often choose between different configurations and control parameters to achieve a given task. A classic tool to describe specifications of the desired force/displacement behavior in such problems is the stiffness ellipsoid, whose geometry is affected by the choice of parameters in both joint control and redundancy resolution{\textemdash}namely, gains and angles. As is well known, impedance control techniques can regulate gains to realize any desired shape of the Cartesian stiffness ellipsoid at the end-effector, so that robot geometry selection could appear secondary. However, humans do not use this possibility: To control the stiffness of our arms, we predominantly use arm configurations. Why is that, and does it makes sense to do the same in robots? To understand this discrepancy, we provide a more complete analysis of the task-space force/deformation behavior of compliant redundant arms to illustrate why the arm geometry plays a dominant role in interaction capabilities of robots. We introduce the notion of allowable Cartesian force/displacement ({\textquotedblleft}stiffness feasibility{\textquotedblright}) regions (SFR) for compliant robots with given torque boundaries. We show that different robot configurations modify such regions and explore the role of robot geometry in achieving an appropriate SFR for the task at hand. The novel concepts and definitions are first illustrated in simulations. Experimental results are then provided to verify the effectiveness of the proposed Cartesian force and stiffness control.

}, keywords = {Robotics}, doi = {10.1109/TRO.2017.2708087}, url = {http://ieeexplore.ieee.org/document/7951027/}, author = {A. Ajoudani and N. G. Tsagarakis and A. Bicchi} } @conference {3218, title = {Design and characterization of a novel high-compliance spring for robots with soft joints}, booktitle = {IEEE International Conference on Advanced Intelligent Mechatronics (AIM)}, year = {2017}, publisher = {IEEE}, organization = {IEEE}, address = {Munich, Germany, 3-7 July 2017}, abstract = {

Low stiffness elements have a number of applications in Soft Robotics, from Series Elastic Actuators (SEA) to torque sensors for compliant systems. In its general formulation, the design problem of elastic components is complex and depends on several variables: material properties, load range, shape factor and size constraints. Consequently, most of the spring designs presented in literature are based on heuristics or are optimized for specific working conditions. This work presents the design study and characterization of a scalable spoked elastic element with hinge tip constraints. We compared the proposed design with three existing spring principles, showing that the spoked solution is the convenient option for low-stiffness and low shape factor elastic elements. Therefore, a design analysis on the main scaling parameters of the spoked spring, namely number of spokes and type of constraints, is presented. Finally, an experimental characterization has been conducted on physical prototypes. The agreement among simulations and experimental results demonstrates the effectiveness of the proposed concept.

}, keywords = {Robotics}, doi = {10.1109/AIM.2017.8014029}, url = {http://ieeexplore.ieee.org/document/8014029/}, author = {F. Negrello and M. G. Catalano and M. Garabini and M. Poggiani and D. G. Caldwell and N. G. Tsagarakis and A. Bicchi} } @conference {3106, title = {Design of an Under-Actuated Wrist Based on Adaptive Synergies}, booktitle = {IEEE International Conference of Robotics and Automation, ICRA2017}, year = {2017}, publisher = {IEEE}, organization = {IEEE}, address = {Singapore, 29 May-3 June 2017}, abstract = {

An effective robotic wrist represents a key enabling element in robotic manipulation, especially in prosthetics. In this paper, we propose an under-actuated wrist system, which is also adaptable and allows to implement different under-actuation schemes. Our approach leverages upon the idea of soft synergies - in particular the design method of adaptive synergies - as it derives from the field of robot hand design. First we introduce the design principle and its implementation and function in a configurable test bench prototype, which can be used to demonstrate the feasibility of our idea. Furthermore, we report on results from preliminary experiments with humans, aiming to identify the most probable wrist pose during the pre-grasp phase in activities of daily living. Based on these outcomes, we calibrate our wrist prototype accordingly and demonstrate its effectiveness to accomplish grasping and manipulation tasks.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2017.7989789}, url = {http://ieeexplore.ieee.org/document/7989789/}, author = {S. Casini and V. Tincani and G. Averta and M. Poggiani and C. Della Santina and E. Battaglia and M. G. Catalano and M. Bianchi and G. Grioli and A. Bicchi} } @conference {3387, title = {Design of an under-actuated wrist based on adaptive synergies}, booktitle = {Robotics and Automation (ICRA), 2017 IEEE International Conference on}, year = {2017}, pages = {6679{\textendash}6686}, publisher = {IEEE}, organization = {IEEE}, abstract = {

An effective robotic wrist represents a key en- abling element in robotic manipulation, especially in prosthetics. In this paper, we propose an under-actuated wrist system, which is also adaptable and allows to implement different under- actuation schemes. Our approach leverages upon the idea of soft synergies - in particular the design method of adaptive synergies - as it derives from the field of robot hand design. First we intro- duce the design principle and its implementation and function in a configurable test bench prototype, which can be used to demonstrate the feasibility of our idea. Furthermore, we report on results from preliminary experiments with humans, aiming to identify the most probable wrist pose during the pre-grasp phase in activities of daily living. Based on these outcomes, we calibrate our wrist prototype accordingly and demonstrate its effectiveness to accomplish grasping and manipulation tasks.

}, author = {S. Casini and V. Tincani and G. Averta and M. Poggiani and C. Della Santina and E. Battaglia and M. G. Catalano and M. Bianchi and G. Grioli and A. Bicchi} } @article {3225, title = {Development of a High-Speed Current Injection and Voltage Measurement System for Electrical Impedance Tomography-Based Stretchable Sensors}, journal = {TECHNOLOGIES}, volume = {5}, year = {2017}, keywords = {conductive fabric, EIT, pressure sensor, stretchable, wearable}, doi = {10.3390/technologies5030048}, url = {http://www.mdpi.com/2227-7080/5/3/48}, author = {S. Russo and S. Nefti-meziani and N. Carbonaro and A. Tognetti} } @article {3223, title = {A Multimodal Perception Framework for Users Emotional State Assessment in Social Robotics}, journal = {FUTURE INTERNET}, volume = {9}, year = {2017}, keywords = {human-robot interaction, multimodality, perception framework, physiological signal acquisition, social robotics}, doi = {10.3390/fi9030042}, author = {Cominelli, L. and N. Carbonaro and D. Mazzei and R. Garofalo and A. Tognetti and D. De Rossi} } @article {3138, title = {Online Model Based Estimation of Complete Joint Stiffness of Human Arm}, journal = {IEEE Robotics and Automation Letters}, volume = {3}, year = {2017}, month = {01/2018}, pages = {84 - 91}, abstract = {

The endpoint stiffness of the human arm has been long recognized as a key component ensuring the quasi-static stability of the arm physical interactions with the external world. Similarly, the understanding of the joint stiffness behavior can provide complementary insights, e.g., on the underlying stiffness regulation principles across different joints including the nullspace stiffness profiles. Traditionally, the experimental modeling and estimation of the human arm joint stiffness is achieved by the transformation of the identified arm endpoint stiffness to the joint coordinates. Due to the underlying kinematic redundancy, the obtained joint stiffness matrix is rank-deficient which implies that the information in the joint stiffness matrix is incomplete. While in robotics applications this issue can be addressed by designing a desired nullspace stiffness behavior through appropriate projections, the use of a similar technique in the identification of human joint stiffness profile is meaningless. Hence, the first objective of this work is to address this issue by developing a novel technique to identify the complete and physiologically meaningful joint stiffness of human arm. Second, we present a model-based online estimation technique to estimate the seven-dimensional complete joint stiffness in various arm poses and activation levels of the two dominant arm muscles that correspond to the geometric and volume modifications of the joint stiffness profile, respectively.

}, keywords = {Haptics, Robotics}, doi = {10.1109/LRA.2017.2731524}, url = {http://ieeexplore.ieee.org/document/7990237/}, author = {C. Fang and A. Ajoudani and A. Bicchi and N. G. Tsagarakis} } @conference {3157, title = {Online Model Based Estimation of Complete Joint Stiffness of Human Arm}, booktitle = {IEEE International Conference of Intelligent Robots and Systems (IROS2017)}, year = {2017}, address = {Vancouver, Canada, September 24{\textendash}28, 2017}, keywords = {Robotics}, author = {C. Fang and A. Ajoudani and A. Bicchi and N. G. Tsagarakis} } @article {3224, title = {A Quantitative Evaluation of Drive Pattern Selection for Optimizing EIT-Based Stretchable Sensors}, journal = {SENSORS}, volume = {17}, year = {2017}, abstract = {

Electrical Impedance Tomography (EIT) is a medical imaging technique that has been recently used to realize stretchable pressure sensors. In this method, voltage measurements are taken at electrodes placed at the boundary of the sensor and are used to reconstruct an image of the applied touch pressure points. The drawback with EIT-based sensors, however, is their low spatial resolution due to the ill-posed nature of the EIT reconstruction. In this paper, we show our performance evaluation of different EIT drive patterns, specifically strategies for electrode selection when performing current injection and voltage measurements. We compare voltage data with Signal-to-Noise Ratio (SNR) and Boundary Voltage Changes (BVC), and study image quality with Size Error (SE), Position Error (PE) and Ringing (RNG) parameters, in the case of one-point and two-point simultaneous contact locations. The study shows that, in order to improve the performance of EIT based sensors, the electrode selection strategies should dynamically change correspondingly to the location of the input stimuli. In fact, the selection of one drive pattern over another can improve the target size detection and position accuracy up to 0.04. and 0.18, respectively.

}, keywords = {conductive fabric, inverse problem, performance parameters, stretchable sensor}, doi = {10.3390/s17091999}, url = {http://www.mdpi.com/1424-8220/17/9/1999/htm}, author = {S. Russo and S. Nefti-meziani and N. Carbonaro and A. Tognetti} } @article {3152, title = {Reduced-Complexity Representation of the Human Arm Active Endpoint Stiffness for Supervisory Control of Remote Manipulation}, journal = {International Journal of Robotics Research}, volume = {37}, year = {2017}, month = {11/2017}, chapter = {155}, doi = {https://doi.org/10.1177\%2F0278364917744035}, url = {https://journals.sagepub.com/doi/full/10.1177/0278364917744035}, author = {A. Ajoudani and C. Fang and N. G. Tsagarakis and A. Bicchi} } @inbook {3221, title = {Strain and angular sensing fabrics for human motion analysis in daily life}, booktitle = {Smart textiles : fundamentals, design, and interaction}, year = {2017}, pages = {49{\textendash}70}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, address = {Dordrecht}, author = {F. Lorussi and N. Carbonaro and D. De Rossi and A. Tognetti} } @conference {3726, title = {Synergy-driven performance enhancement of vision-based 3D hand pose reconstruction}, booktitle = {Wireless mobile communication and healthcare : 6th International conference, MobiHealth 2016, Milan, Italy, November 14-16, 2016, Proceedings}, year = {2017}, doi = {10.1007/978-3-319-58877-3_42}, author = {S. Ciotti and E. Battaglia and I. Oikonomidis and A. Makris and A. Tsoli and A. Bicchi and A. A. Agyros and M. Bianchi} } @article {3226, title = {Systematic Review of fMRI Compatible Devices: Design and Testing Criteria}, journal = {ANNALS OF BIOMEDICAL ENGINEERING}, year = {2017}, keywords = {Biomedical Engineering, Compatibility, fMRI, Mechatronic devices, Safety}, doi = {10.1007/s10439-017-1853-1}, url = {http://link.springer.com/journal/volumesAndIssues/10439}, author = {V. Hartwig and N. Carbonaro and A. Tognetti and N. Vanello} } @article {3137, title = {WALK-MAN: A High-Performance Humanoid Platform for Realistic Environments}, journal = {Journal of Field Robotics}, volume = {34}, year = {2017}, month = {06/2017}, pages = {1 - 34}, abstract = {

In this work, we present WALK-MAN, a humanoid platform that has been developed to operate in realistic unstructured environment, and demonstrate new skills including powerful manipulation, robust balanced locomotion, high-strength capabilities, and physical sturdiness. To enable these capabilities, WALK-MAN design and actuation are based on the most recent advancements of series elastic actuator drives with unique performance features that differentiate the robot from previous state-of-the-art compliant actuated robots. Physical interaction performance is benefited by both active and passive adaptation, thanks to WALK-MAN actuation that combines customized high-performance modules with tuned torque/velocity curves and transmission elasticity for high-speed adaptation response and motion reactions to disturbances. WALK-MAN design also includes innovative design optimization features that consider the selection of kinematic structure and the placement of the actuators with the body structure to maximize the robot performance. Physical robustness is ensured with the integration of elastic transmission, proprioceptive sensing, and control. The WALK-MAN hardware was designed and built in 11 months, and the prototype of the robot was ready four months before DARPA Robotics Challenge (DRC) Finals. The motion generation of WALK-MAN is based on the unified motion-generation framework of whole-body locomotion and manipulation (termed loco-manipulation). WALK-MAN is able to execute simple loco-manipulation behaviors synthesized by combining different primitives defining the behavior of the center of gravity, the motion of the hands, legs, and head, the body attitude and posture, and the constrained body parts such as joint limits and contacts. The motion-generation framework including the specific motion modules and software architecture is discussed in detail. A rich perception system allows the robot to perceive and generate 3D representations of the environment as well as detect contacts and sense physical interaction force and moments. The operator station that pilots use to control the robot provides a rich pilot interface with different control modes and a number of teleoperated or semiautonomous command features. The capability of the robot and the performance of the individual motion control and perception modules were validated during the DRC in which the robot was able to demonstrate exceptional physical resilience and execute some of the tasks during the competition.

}, keywords = {Robotics}, issn = {1556-4967}, doi = {10.1002/rob.21702}, url = {http://onlinelibrary.wiley.com/doi/10.1002/rob.21702/epdf}, author = {N. G. Tsagarakis and D. G. Caldwell and F. Negrello and W. Choi and L. Baccelliere and V. G. Loc and J. Noorden and L. Muratore and A. Margan and A. Cardellino and L. Natale and E. Mingo Hoffman and H. Dallali and N. Kashiri and J. Malzahn and J. Lee and P. Kryczka and D. Kanoulas and M. Garabini and M. G. Catalano and M. Ferrati and V. Varricchio and L. Pallottino and C. Pavan and A. Bicchi and A Settimi and A. Rocchi and A. Ajoudani} } @article {3231, title = {Assessment of a Smart Sensing Shoe for Gait Phase Detection in Level Walking}, journal = {ELECTRONICS}, volume = {5}, year = {2016}, pages = {1{\textendash}15}, keywords = {accelerometers, force sensors, gait cycle, gait phase, smart shoe, walking, wearable technology}, doi = {10.3390/electronics5040078}, url = {http://www.mdpi.com/2079-9292/5/4/78}, author = {N. Carbonaro and F. Lorussi and A. Tognetti} } @article {3246, title = {Assessment of spontaneous cardiovascular oscillations in Parkinson{\textquoteright}s disease}, journal = {Biomedical Signal Processing and Control}, volume = {26}, year = {2016}, pages = {80{\textendash}89}, keywords = {Bioengineering}, author = {G. Valenza and S. Orsolini and S. Diciotti and L. Citi and E. P. Scilingo and M. Guerrisi and S. Danti and C. Lucetti and C. Tessa and R. Barbieri} } @article {3235, title = {A bi-articular model for scapular-humeral rhythm reconstruction through data from wearable sensors}, journal = {JOURNAL OF NEUROENGINEERING AND REHABILITATION}, volume = {13}, year = {2016}, pages = {1{\textendash}13}, keywords = {Hand posture estimation, Reaching activity, Scapular girdle movement, Scapular-humeral rhythm, Wearable sensing}, doi = {10.1186/s12984-016-0149-2}, url = {https://jneuroengrehab.biomedcentral.com/articles/10.1186/s12984-016-0149-2}, author = {F. Lorussi and N. Carbonaro and D. De Rossi and A. Tognetti} } @article {2685, title = {The Change in Fingertip Contact Area as a Novel Proprioceptive Cue}, journal = {Current Biology}, volume = {26}, year = {2016}, month = {05/2016}, pages = {1159{\textendash}1163}, abstract = {

Humans, many animals, and certain robotic hands have deformable fingertip pads. Deformable pads have the advantage of conforming to the objects that are being touched, ensuring a stable grasp for a large range of forces and shapes. Pad deformations change with finger displacements during touch. Pushing a finger against an external surface typically provokes an increase of the gross contact area, potentially providing a relative motion cue, a situation comparable to looming in vision. The rate of increase of the area of contact also depends on the compliance of the object. Because objects normally do not suddenly change compliance, participants may interpret an artificially induced variation in compliance, which coincides with a change in the gross contact area, as a change in finger displacement, and consequently they may misestimate their finger{\textquoteright}s position relative to the touched object. To test this, we asked participants to compare the perceived displacements of their finger while contacting an object varying pseudo-randomly in compliance from trial to trial. Results indicate a bias in the perception of finger displacement induced by the change in compliance, hence in contact area, indicating that participants interpreted the altered cutaneous input as a cue to proprioception. This situation highlights the capacity of the brain to take advantage of knowledge of the mechanical properties of the body and of the external environment.

}, keywords = {Haptics, Robotics}, doi = {10.1016/j.cub.2016.02.052}, url = {http://www.sciencedirect.com/science/article/pii/S0960982216301348}, author = {A. Moscatelli and M. Bianchi and A. Serio and A. Terekhov and V. Hayward and M. Ernst and A. Bicchi} } @inbook {2714, title = {A Full Body Sensing System for Monitoring Stroke Patients in a Home Environment}, booktitle = {Biomedical Engineering Systems and Technologies: 7th International Joint Conference, BIOSTEC 2014, Angers, France, March 3-6, 2014, Revised Selected Papers}, year = {2016}, pages = {378 - 393}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, keywords = {Bioengineering}, isbn = {978-3-319-26128-7}, doi = {10.1007/978-3-319-26129-4_25}, author = {Klaassen, B. and van Beijnum, B.J.F. and Weusthof, M. H. H. and D. Hofs and van Meulen, F.B. and E. Droog and H. Luinge and S. Laurens and A. Tognetti and F. Lorussi and R. Paradiso and Held, J. and Luft, A. R. L. and Reenalda, J. and Nikamp, C. D. M. and Buurke, J. H. and Hermens, HJ and Veltink, P.} } @article {3227, title = {A Hands-Free Interface for Controlling Virtual Electric-Powered Wheelchairs}, journal = {INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS}, volume = {13}, year = {2016}, pages = {1{\textendash}10}, keywords = {Assistive Technologies, Electric-powered Wheelchair, Hands-free Interface}, doi = {10.5772/62028}, author = {Gulrez, T and A. Tognetti and W. J. YooN and Kavakli-Thorne, M. and J.-J. Cabibihan} } @conference {3228, title = {A highly stretchable artificial sensitive skin using EIT}, booktitle = {Book of abstracts: 16th International Conference on Electrical Bio-Impedance, 17th International Conference on Electrical Impedance Tomography. ICEBI and EIT Stockholm 19{\quotesinglbase}{\"A}{\`\i}23 June 2016}, year = {2016}, pages = {132{\textendash}132}, publisher = {Karolinska Institutet}, organization = {Karolinska Institutet}, address = {Stoccolma}, url = {http://www.icebi2016.org/images/ICEBI_2016_web.pdf}, author = {S. Russo and A. Tognetti and N. Carbonaro and S. Nefti-meziani} } @conference {2545, title = {A Modular Compliant Actuator for Emerging High Performance and Fall-Resilient Humanoids}, booktitle = {15th IEEE RAS Humanoids Conference (HUMANOIDS2015)}, year = {2016}, note = {

This work is supported by the WALK-MAN FP7-ICT-2013-10 European Commission project.

}, publisher = {IEEE}, organization = {IEEE}, keywords = {Robotics}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7363567}, author = {F. Negrello and M. Garabini and M. G. Catalano and J. Malzahn and D. G. Caldwell and A. Bicchi and N. G. Tsagarakis} } @article {2866, title = {A Multi-Modal Sensing Glove for Human Manual-Interaction Studies}, journal = {Electronics}, volume = { 5}, year = {2016}, note = {

This work is supported in part by the European Research Council under the Advanced Grant {\textquotedblleft}SoftHands: A Theory of Soft Synergies for a New Generation of Artificial Hands{\textquotedblright} (No. ERC-291166), by the EU H2020 projects {\textquotedblleft}SoftPro: Synergy-based Open-source Foundations and Technologies for Prosthetics and RehabilitatiOn{\textquotedblright} (No. 688857) and {\textquotedblleft}SOMA: Soft Manipulation{\textquotedblright} (No. 64559) and by the EU FP7 project (No. 601165) {\textquotedblleft}WEARable HAPtics for Humans and Robots (WEARHAP){\textquotedblright}.

}, abstract = {

We present an integrated sensing glove that combines two of the most visionary wearable sensing technologies to provide both hand posture sensing and tactile pressure sensing in a unique, lightweight, and stretchable device. Namely, hand posture reconstruction employs Knitted Piezoresistive Fabrics that allows us to measure bending. From only five of these sensors (one for each finger) the full hand pose of a 19 degrees of freedom (DOF) hand model is reconstructed leveraging optimal sensor placement and estimation techniques. To this end, we exploit a-priori information of synergistic coordination patterns in grasping tasks. Tactile sensing employs a piezoresistive fabric allowing us to measure normal forces in more than 50 taxels spread over the palmar surface of the glove. We describe both sensing technologies, report on the software integration of both modalities, and describe a preliminary evaluation experiment analyzing hand postures and force patterns during grasping. Results of the reconstruction are promising and encourage us to push further our approach with potential applications in neuroscience, virtual reality, robotics and tele-operation.

}, keywords = {Haptics}, doi = {10.3390/electronics5030042}, url = {http://www.mdpi.com/2079-9292/5/3/42/pdf}, author = {M. Bianchi and R. Haschke and G. B{\"u}scher and S. Ciotti and N. Carbonaro and A. Tognetti} } @article {2627, title = {No More Heavy Lifting: Robotic Solutions to the Container Unloading Problem}, journal = {IEEE Robotics and Automation Magazine}, volume = {23}, year = {2016}, month = {08/2016}, chapter = {94}, keywords = {Robotics}, doi = {https://doi.org/10.1109/MRA.2016.2535098}, url = {https://ieeexplore.ieee.org/document/7553531}, author = {T. Stoyanov and N. Vaskeviciusz and C. A. Mueller and T. Fromm and R. Krug and V. Tincani and R. Mojtahedzadeh and S. Kunaschk and R. M. Ernits and D. R. Canelhas and M. Bonilla and S. Schwertfeger and M. Bonini and H. Halfar and K. Pathak and M. Rohde and G Fantoni and A. Bicchi and A. Birk and A. Lilienthal and W. Echelmeyer} } @conference {3232, title = {A preliminary framework for a social robot {\quotesinglbase}{\"A}{\'u}sixth sense{\quotesinglbase}{\"A}{\`u}}, booktitle = {Biomimetic and Biohybrid Systems 5th International Conference, Living Machines 2016, Edinburgh, UK, July 19-22, 2016. Proceedings}, volume = {9793}, year = {2016}, pages = {58{\textendash}70}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Dordrecht}, keywords = {Affective computing, Behaviour monitoring, Computer Science (all), human-robot interaction, social robotics, Synthetic tutor, Theoretical Computer Science}, doi = {10.1007/978-3-319-42417-0_6}, url = {http://springerlink.com/content/0302-9743/copyright/2005/}, author = {Cominelli, L. and D. Mazzei and N. Carbonaro and R. Garofalo and A. Zaraki and A. Tognetti and D. De Rossi} } @conference {3230, title = {A Quantitative Evaluation of Drive Patterns in Electrical Impedance Tomography}, booktitle = {Proceedings of the 6th EAI International Conference on Wireless Mobile Communication and Healthcare}, year = {2016}, pages = {337{\textendash}344}, keywords = {drive patterns, EIT, Electrical impedance tomography, stretchable sensors}, doi = {10.1007/978-3-319-58877-3}, author = {S. Russo and N. Carbonaro and A. Tognetti and S. Nefti-meziani} } @article {2711, title = {Reconstruction of medial patello-femoral ligament: Comparison of two surgical techniques}, journal = {J Mech Behav Biomed Mater.}, year = {2016}, month = {02/10}, pages = {272-278}, keywords = {Bioengineering}, doi = {10.1016/j.jmbbm.2016.02.009}, author = {Criscenti, G. and C. De Maria and E. Sebastiani and M. Tei and G. Placella and G. Vozzi and Cerulli, G.} } @conference {2655, title = {Reflex Control of the Pisa/IIT SoftHand during Object Slippage}, booktitle = {IEEE International Conference of Robotics and Automation (ICRA2016)}, year = {2016}, pages = {1972 - 1979}, publisher = {IEEE}, organization = {IEEE}, address = {Stockholm, Sweden}, abstract = {

In this work, to guarantee the Pisa/IIT SoftHand{\textquoteright}s

grasp robustness against slippage, three reflex control modes,

namely Current, Pose and Impedance, are implemented and

experimentally evaluated. Towards this objective, ThimbleSense

fingertip sensors are designed and integrated into the thumb

and middle fingers of the SoftHand for real-time detection and

control of the slippage. Current reflex regulates the restoring

grasp forces of the hand by modulating the motor{\textquoteright}s current

profile according to an update law. Pose and Impedance reflex

modes instead replicate this behaviour by implementing an

impedance control scheme. The difference between the two

latter is that the stiffness gain in Impedance reflex mode is

being varied in addition to the hand pose, as a function of

the slippage on the fingertips. Experimental setup also includes

a seven degrees-of-freedom robotic arm to realize consistent

trajectories (e.g. lifting) among three control modes for the sake

of comparison. Different test objects are considered to evaluate

the efficacy of the proposed reflex modes in our experimental

setup. Results suggest that task-appropriate restoring forces

can be achieved using Impedance reflex due to its capability

in demonstrating instantaneous and rather smooth reflexive

behaviour during slippage. Preliminary experiments on five

healthy human subjects provide evidence on the similarity of the

control concepts exploited by the humans and the one realized

by the Impedance reflex, highlighting its potential in prosthetic

applications.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2016.7487344}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7487344}, author = {A. Ajoudani and E. Hocaoglu and Altobelli, A and M. Rossi and E. Battaglia and N G Tsagarakis and A. Bicchi} } @article {3241, title = {Relationship between cardiac vagal activity and mood congruent memory bias in major depression}, journal = {Journal of Affective Disorders}, volume = {190}, year = {2016}, pages = {19{\textendash}25}, keywords = {Bioengineering}, author = {R. G. Garcia and G. Valenza and C. A. Tomaz and R. Barbieri} } @inbook {2865, title = {The SoftHand Pro: Translation from Robotic Hand to Prosthetic Prototype}, booktitle = {Converging Clinical and Engineering Research on Neurorehabilitation II}, volume = {15}, number = {Biosystems \& Biorobotics }, year = {2016}, note = {

Proceedings of the 3rd International Conference on NeuroRehabilitation (ICNR2016), October 18-21, 2016, Segovia, Spain

}, pages = {469-473}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {

This work presents the translation from a humanoid robotic hand to a prosthetic prototype and its first evaluation in a set of 9 persons with amputation. The Pisa/IIT SoftHand is an underactuated hand built on the neuroscientific principle of motor synergies enabling it to perform natural, human-like movements and mold around grasped objects with minimal control input. These features motivated the development of the SoftHand Pro, a prosthetic version of the SoftHand built to interface with a prosthetic socket. The results of the preliminary testing of the SoftHand Pro showed it to be a highly functional design with an intuitive control system. Present results warrant further testing to develop the SoftHand Pro.

}, keywords = {Haptics, Robotics}, issn = {978-3-319-46668-2}, doi = {10.1007/978-3-319-46669-9_78}, url = {http://link.springer.com/chapter/10.1007/978-3-319-46669-9_78}, author = {S. B. Godfrey and M. Bianchi and K. Zhao and M. G. Catalano and R. Breighner and A. Theuer and K. Andrews and G. Grioli and M. Santello and A. Bicchi} } @article {2867, title = {A Synergy-Based Optimally Designed Sensing Glove for Functional Grasp Recognition}, journal = {Sensors}, volume = {16}, year = {2016}, abstract = {

Achieving accurate and reliable kinematic hand pose reconstructions represents a challenging task. The main reason for this is the complexity of hand biomechanics, where several degrees of freedom are distributed along a continuous deformable structure. Wearable sensing can represent a viable solution to tackle this issue, since it enables a more natural kinematic monitoring. However, the intrinsic accuracy (as well as the number of sensing elements) of wearable hand pose reconstruction (HPR) systems can be severely limited by ergonomics and cost considerations. In this paper, we combined the theoretical foundations of the optimal design of HPR devices based on hand synergy information, i.e., the inter-joint covariation patterns, with textile goniometers based on knitted piezoresistive fabrics (KPF) technology, to develop, for the first time, an optimally-designed under-sensed glove for measuring hand kinematics. We used only five sensors optimally placed on the hand and completed hand pose reconstruction (described according to a kinematic model with 19 degrees of freedom) leveraging upon synergistic information. The reconstructions we obtained from five different subjects were used to implement an unsupervised method for the recognition of eight functional grasps, showing a high degree of accuracy and robustness.

}, keywords = {Haptics}, doi = {10.3390/s16060811}, url = {http://www.mdpi.com/1424-8220/16/6/811}, author = {S. Ciotti and E. Battaglia and N. Carbonaro and A. Bicchi and A. Tognetti and M. Bianchi} } @inbook {3155, title = {Teleimpedance Control: Overview and application}, booktitle = {Human and Robot Hands }, volume = {Springer Series on Touch and Haptic Systems}, year = {2016}, pages = {151-169}, chapter = {9}, abstract = {

In previous chapters, human hand and arm kinematics have been analyzed through a synergstic approach and the underlying concepts were used to design robotic systems and devise simplified control algorithms. On the other hand, it is well-known that synergies can be studied also at a muscular level as a coordinated activation of multiple muscles acting as a single unit to generate different movements. As a result, muscular activations, quantified through Electromyography (EMG) signals can be then processed and used as direct inputs to external devices with a large number of DOFs. In this chapter, we present a minimalistic approach based on tele-impedance control, where EMGs from only one pair of antagonistic muscle pair are used to map the users postural and stiffness references to the synergy-driven anthropomorphic robotic hand, described in chapter 6. In this direction, we first provide an overview of the teleimpedance control concept which forms the basis for the development of the hand controller. Eventually, experimental results evaluate the effectiveness of the teleimpedance control concept in execution of the tasks which require significant dynamics variation or are executed in remote environments with dynamic uncertainties.

}, keywords = {Robotics}, issn = {978-3-319-26705-0}, doi = {10.1007/978-3-319-26706-7}, author = {A. Ajoudani and S. B. Godfrey and N. G. Tsagarakis and A. Bicchi} } @conference {3234, title = {Towards the development of an EIT-based stretchable sensor for multi-touch industrial human-computer interaction systems}, booktitle = {Cross-Cultural Design 8th International Conference, CCD 2016, Held as Part of HCI International 2016, Toronto, ON, Canada, July 17-22, 2016, Proceedings}, volume = {9741}, year = {2016}, pages = {563{\textendash}573}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Dordrecht}, keywords = {Computer Science (all), Theoretical Computer Science}, doi = {10.1007/978-3-319-40093-855}, url = {http://springerlink.com/content/0302-9743/copyright/2005/}, author = {S. Russo and S. Nefti-meziani and Gulrez, T and N. Carbonaro and A. Tognetti} } @article {2904, title = {Variable Stiffness Actuators: Review on Design and Components}, journal = { IEEE/ASME Transactions on Mechatronics }, volume = {21}, year = {2016}, month = {10/2016}, pages = {2418 - 2430}, abstract = {

Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.

}, keywords = {Robotics}, doi = {10.1109/TMECH.2015.2501019}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7330025}, author = {S. Wolf and G. Grioli and O. Eiberger and W. Friedl and M. Grebenstein and H. Hoppner and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and D. Lefeber and S. Stramigioli and N. G. Tsagarakis and M. Van Damme and R. Van Ham and B. Vanderborght and L. C. Visser and A. Bicchi and A Albu-Schaeffer} } @conference {2788, title = { WALK-MAN humanoid lower body design optimization for enhanced physical performance}, booktitle = {IEEE International Conference of Robotics and Automation (ICRA2016)}, year = {2016}, pages = {1817 - 1824}, publisher = {IEEE}, organization = {IEEE}, address = {Stockholm, Sweden, May 16-21, 2016 }, abstract = {
The deployment of robots to assist in environments hostile for humans during emergency scenarios require robots to demonstrate enhanced physical performance, that includes adequate power, adaptability and robustness to physical interactions and efficient operation. This work presents the design and development of the lower body of the new high performance humanoid WALK-MAN, a robot developed recently to assist in disaster response scenarios. The paper introduces the details of the WALK-MAN lower-body, highlighting the innovative design optimization features considered to maximize the leg performance. Starting from the general lower body specifications the objectives of the design and how they were addressed are introduced, including the selection of the leg kinematics, the arrangement of the actuators and their integration with the leg structure to maximize the range of motion, reduce the leg mass and inertia, and shape the leg mass distribution for better dynamic performance. Physical robustness is ensured with the integration of elastic transmission and impact energy absorbing covers. Experimental walking trials demonstrate the correct operation of the legs while executing a walking gait.
}, keywords = {Robotics}, doi = {10.1109/ICRA.2016.7487327}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7487327}, author = {F. Negrello and M. Garabini and M. G. Catalano and P. Kryczka and W. Choi and D. G. Caldwell and A. Bicchi and N. G. Tsagarakis} } @article {2749, title = {The Walk-Man Robot Software Architecture}, journal = {Front. Robot. AI}, year = {2016}, month = {05/2016}, abstract = {

A software and control architecture for a humanoid robot is a complex and large project, which involves a team of developers/researchers to be coordinated and requires many hard design choices. If such project has to be done in a very limited time, i.e., less than 1 year, more constraints are added and concepts, such as modular design, code reusability, and API definition, need to be used as much as possible. In this work, we describe the software architecture developed for Walk-Man, a robot participant at the Darpa Robotics Challenge. The challenge required the robot to execute many different tasks, such as walking, driving a car, and manipulating objects. These tasks need to be solved by robotics specialists in their corresponding research field, such as humanoid walking, motion planning, or object manipulation. The proposed architecture was developed in 10 months, provided boilerplate code for most of the functionalities required to control a humanoid robot and allowed robotics researchers to produce their control modules for DRC tasks in a short time. Additional capabilities of the architecture include firmware and hardware management, mixing of different middlewares, unreliable network management, and operator control station GUI. All the source code related to the architecture and some control modules have been released as open source projects.

}, keywords = {Robotics}, doi = { http://dx.doi.org/10.3389/frobt.2016.00025}, url = {http://bit.ly/2jAPke2}, author = {M. Ferrati and A Settimi and L. Muratore and N. G. Tsagarakis and L. Natale and L. Pallottino} } @article {3233, title = {Wearable Textile Platform for Assessing Stroke Patient Treatment in Daily Life Conditions}, journal = {FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY}, volume = {4}, year = {2016}, pages = {1{\textendash}28}, keywords = {ambulatory monitoring, data fusion, gait, Grasping, reaching, stroke rehabilitation, wearable sensors}, doi = {10.3389/fbioe.2016.00028}, author = {F. Lorussi and N. Carbonaro and D. De Rossi and R. Paradiso and Veltink, P. and A. Tognetti} } @article {2499, title = {Biomimicking of the Breast Tumor Microenvironment}, journal = {Current Molecular Biology Reports}, volume = {1 (2)}, year = {2015}, pages = {71-76}, keywords = {Bioengineering}, author = {M. Giussani and C. De Maria and M. Vasso and F. Montemurro and T. Triulzi and E. Tagliabue and C. Gelfi and G. Vozzi} } @article {2510, title = {Decoupling the role of stiffness from other hydroxyapatite signalling cues in periosteal derived stem cell differentiation}, journal = {Scientific Reports}, volume = {5}, year = {2015}, pages = {10778}, keywords = {Bioengineering}, issn = {2045-2322}, doi = {10.1038/srep10778}, url = {http://www.nature.com/doifinder/10.1038/srep10778}, author = {G. Mattei and Ferretti, C. and Tirella, A and A. Ahluwalia and Mattioli-Belmonte, M.} } @conference {2718, title = {Evaluation of wearable KPF goniometers in knee flexion-extension measurement for daily-life applications}, booktitle = {Proceedings of Wireless EAI 4th International Conference on Mobile Communication and Healthcare (Mobihealth)}, year = {2015}, pages = {1-4}, publisher = {ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering}, organization = {ICST (Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering}, keywords = {Bioengineering}, doi = {10.4108/eai.14-10-2015.2261613}, url = {http://dl.acm.org/citation.cfm?id=2897477}, author = {F. Lorussi and N. Carbonaro and D. De Rossi and A. Tognetti} } @article {2507, title = { HisTOOLogy: an open-source tool for quantitative analysis of histological sections }, journal = {Journal of Microscopy}, year = {2015}, month = {08/2015}, keywords = {Bioengineering}, doi = {10.1111/jmi.12292. }, author = {C. Magliaro and Tirella, A and G. Mattei and Pirone, A. and A. Ahluwalia} } @conference {3251, title = {Instantaneous Bispectral Analysis of Heartbeat Dynamics for the Assessment of Major Depression}, booktitle = {Computing in Cardiology Conference (CinC)}, year = {2015}, keywords = {Bioengineering}, author = {R. G. Garcia and G. Valenza and C. A. Tomaz and R. Barbieri} } @conference {2336, title = {Kinematic Analysis and Design Considerations for Optimal Base Frame Arrangement of Humanoid Shoulders}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2015)}, year = {2015}, pages = {2710 - 2715}, address = {Seattle, USA, 25 - 30 May}, keywords = {Robotics}, doi = {10.1109/ICRA.2015.7139566}, author = {M. Bagheri and A. Ajoudani and J. Lee and D. G. Caldwell and N G Tsagarakis} } @conference {3247, title = {Lower instantaneous entropy of heartbeat dynamics during seizures in untreated temporal lobe epilepsy}, booktitle = {Computing in Cardiology Conference (CinC), 2015}, year = {2015}, pages = {1037{\textendash}1040}, publisher = {IEEE}, organization = {IEEE}, keywords = {Bioengineering}, author = {Barbieri, R. and G. Valenza and L. Citi and F. Placidi and F. Izzi and M. Albanese and M. Marciani and M. Guerrisi and A. Romigi and N. Toschi} } @article {2716, title = {Music, clicks, and their imaginations favor differently the event-based timing component for rhythmic movements}, journal = {EXPERIMENTAL BRAIN RESEARCH}, volume = {233}, year = {2015}, pages = {1945{\textendash}1961}, keywords = {Bioengineering}, issn = {0014-4819}, doi = {10.1007/s00221-015-4267-z}, url = {http://dx.medra.org/10.1007/s00221-015-4267-z}, author = {Bravi, R. and E. Quarta and Del Tongo, C. and N. Carbonaro and A. Tognetti and Minciacchi, D.} } @article {2511, title = {Nano-in-Micro Self-Reporting Hydrogel Constructs}, journal = {Journal of Biomedical Nanotechnology}, volume = {11}, year = {2015}, pages = {1451{\textendash}1460}, keywords = {Bioengineering}, issn = {15507033}, doi = {10.1166/jbn.2015.2085}, url = {http://openurl.ingenta.com/content/xref?genre=article\&issn=1550-7033\&volume=11\&issue=8\&spage=1451}, author = {Tirella, A and La Marca, M and Brace, L.A. and G. Mattei and Aylott, J. and A. Ahluwalia} } @article {2717, title = {Neuro-fuzzy physiological computing to assess stress levels in virtual reality therapy}, journal = {INTERACTING WITH COMPUTERS}, volume = {27}, year = {2015}, pages = {521{\textendash}533}, keywords = {Bioengineering}, issn = {0953-5438}, doi = {10.1093/iwc/iwv010}, url = {http://dx.medra.org/10.1093/iwc/iwv010}, author = {Tartarisco, G. and N. Carbonaro and A. Tonacci and G. M. Bernava and A. Arnao and G. Crifaci and P. Cipresso and G. Riva and A. Gaggioli and D. De Rossi and A. Tognetti and G. Pioggia} } @article {3239, title = {Nonlinear digital signal processing in mental health: characterization of major depression using instantaneous entropy measures of heartbeat dynamics}, journal = {Frontiers in physiology}, volume = {6}, year = {2015}, keywords = {Bioengineering}, author = {G. Valenza and R. G. Garcia and L. Citi and E. P. Scilingo and C. A. Tomaz and R. Barbieri} } @conference {2478, title = {Potential merits for space robotics from novel concepts of actuation for soft robotics}, booktitle = {Advanced Space Technologies for Robotics and Automation (ASTRA) }, year = {2015}, address = {Noordwijk, The Netherlands May 11-13, 2015}, keywords = {Robotics}, author = {G. Mathijssen and S. Terryn and R. Funemont and M. Garabini and M. G. Catalano and G. Grioli and D. Lefeber and A. Bicchi and B. Vanderborght} } @article {2514, title = {Realisation and characterization of conductive hollow fibers for neuronal tissue engineering}, journal = {Journal of Biomedical Materials Research - Part B Applied Biomaterials}, volume = {103}, year = {2015}, pages = {1107-1119}, keywords = {Bioengineering}, author = {Gattazzo, F. and C. De Maria and Whulanza, Y. and Taverni, G. and A. Ahluwalia and G. Vozzi} } @conference {2559, title = {A Reduced-Complexity Description of Arm Endpoint Stiffness with Applications to Teleimpedance Control}, booktitle = {IEEE International Conference of Intelligent Robots and Systems - IROS2015}, year = {2015}, note = {

softhands, wearhap

}, pages = {1017 - 1023}, publisher = {IEEE}, organization = {IEEE}, address = {Hamburg, Germany, 28 Sept - 2 Oct 2015}, abstract = {

Effective and stable execution of a remote task in an uncertain environment requires that the task force and position trajectories of the slave robot be appropriately commanded. To achieve this goal, in teleimpedance control, a reference command which consists of the stiffness and position profiles of the master is computed and realized by the compliant slave robot in real-time. This highlights the need for a suitable and computationally efficient tracking of the human limb stiffness profile in real-time. In this direction, based on the observations in human neuromotor control which give evidence on the predominant use of the arm configuration in directional adjustments of the endpoint stiffness profile, and the role of muscular co-activations which contribute to a coordinated stiffening of the task stiffness in all directions, we propose a novel and computationally efficient model of the arm endpoint stiffness behaviour. With the purpose of real-time tracking of the human arm kinematics, an arm triangle is introduced using three body markers at the shoulder, elbow and wrist joints. In addition, a co-contraction index is defined using muscular activities of a dominant antagonistic muscle pair. Calibration and identification of the model parameters are carried out experimentally, using perturbation-based arm endpoint stiffness measurements in different arm configurations and co-contraction levels of the chosen muscles. Results of this study suggest that the proposed model enables the master to naturally execute a remote task by modulating the direction of the major axes of the endpoint stiffness and its volume using arm configuration and the co-ativation of the involved muscles, respectively.

}, keywords = {Haptics, Robotics}, doi = {10.1109/IROS.2015.7353495}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7353495}, author = {A. Ajoudani and C. Fang and N G Tsagarakis and A. Bicchi} } @conference {2335, title = {On the Role of Robot Configuration in Cartesian Stiffness Control}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2015)}, year = {2015}, pages = {1010 - 1016}, address = {Seattle, USA, 25 - 30 May}, keywords = {Robotics}, doi = {10.1109/ICRA.2015.7139300}, author = {A. Ajoudani and N G Tsagarakis and A. Bicchi} } @article {1976, title = {Social Robotics and Societies of Robots}, journal = {The Information Society Special Issue: Beyond Industrial Robotics: Social Robots Entering Public and Domestic Spheres}, volume = {31}, year = {2015}, abstract = {

The sustainability of social robotics and other ambitious research programs

depends on the identification of lines of research that are coherent with its

visionary goals while satisfying more stringent constraints of feasibility and near-
term pay-offs. These multiple constraints are naturally conducive to the idea of a

society of robots operating within the physical environments of everyday human

life, developing there rich robot-robot social exchanges, and yet refraining from

any physical contact with human beings.

Achieving the visionary goals of social robotics or its more realistic objectives

requires extensive multidisciplinary cooperation. Accordingly, social robotics

may come to play a significant coordinating role for the constellation of research

communities in robotics. This coordinating role is exemplified here by reference

to a principled approach to robotic hand control based on sensory-motor soft

synergies: pursued in some current investigations on artificial hands, this

approach promises to meet distinctive needs arising in social robotics in the way

of dexterous manipulation of objects that are primarily conceived for human use.

}, keywords = {Robotics}, author = {A. Bicchi and G. Tamburrini} } @article {2158, title = {Tele- Impedance based Assistive Control for a Compliant Knee Exoskeleton: Stiffness Augmentation and Motion Assistance}, journal = {Robotics and Autonomous Systems}, volume = {73 part A}, year = {2015}, note = {

special issue\ "Wearable Robotics"

}, month = {11/2015}, pages = {78-90}, abstract = {

This paper presents a tele-impedance based assistive control scheme for a knee exoskeleton device. The proposed controller captures the user{\textquoteright}s intent to generate task-related assistive torques by means of the exoskeleton in different phases of the subject{\textquoteright}s normal activity. To do so, a detailed musculoskeletal model of the human knee is developed and experimentally calibrated to best match the user{\textquoteright}s kinematic and dynamic behavior. Three dominant antagonistic muscle pairs are used in our model, in which electromyography (EMG) signals are acquired, processed and used for the estimation of the knee joint torque, trajectory and the stiffness trend, in real time. The estimated stiffness trend is then scaled and mapped to a task-related stiffness interval to agree with the desired degree of assistance. The desired stiffness and equilibrium trajectories are then tracked by the exoskeleton{\textquoteright}s impedance controller. As a consequence, while minimum muscular activity corresponds to low stiffness, i.e.\ highly transparent motion, higher co-contractions result in a stiffer joint and a greater level of assistance. To evaluate the robustness of the proposed technique, a study of the dynamics of the human{\textendash}exoskeleton system is conducted, while the stability in the steady state and transient condition is investigated. In addition, experimental results of standing-up and sitting-down tasks are demonstrated to further investigate the capabilities of the controller. The results indicate that the compliant knee exoskeleton, incorporating the proposed tele-impedance controller, can effectively generate assistive actions that are volitionally and intuitively controlled by the user{\textquoteright}s muscle activity.

}, keywords = {Robotics}, doi = {10.1016/j.robot.2014.09.027}, url = {http://www.sciencedirect.com/science/article/pii/S0921889014002127}, author = {N. Karavas and A. Ajoudani and N G Tsagarakis and J. Saglia and A. Bicchi and D. Caldwell} } @article {2080, title = {Variable Stiffness Actuators: the user{\textquoteright}s point of view}, journal = {Int. J. Robotics Research}, volume = {34}, year = {2015}, note = {

Extensions.zip

}, month = {05/2015}, pages = {727-743}, keywords = {Robotics}, doi = {10.1177/0278364914566515}, url = {http://ijr.sagepub.com/cgi/reprint/0278364914566515v1.pdf?ijkey=anmgudvoLz7ZloP\&keytype=finite}, author = {G. Grioli and S. Wolf and M. Garabini and M. G. Catalano and E. Burdet and D. G. Caldwell and R. Carloni and W. Friedl and M. Grebenstein and M. Laffranchi and D. Lefeber and S. Stramigioli and N G Tsagarakis and M. Van Damme and B. Vanderborght and A Albu-Schaeffer and A. Bicchi} } @article {2715, title = {Wearable goniometer and accelerometer sensory fusion for knee joint angle measurement in daily-life}, journal = {SENSORS}, volume = {15}, year = {2015}, pages = {28435{\textendash}28455}, keywords = {Bioengineering}, issn = {1424-8220}, doi = {10.3390/s151128435}, url = {http://dx.medra.org/10.3390/s151128435}, author = {A. Tognetti and F. Lorussi and N. Carbonaro and D. De Rossi} } @conference {2086, title = {A change in the fingertip contact area induces an illusory displacement of the finger}, booktitle = {Eurohaptics}, volume = {LNCS - Free Preview Haptics: Neuroscience, Devices, Modeling, and Applications}, year = {2014}, pages = {72 - 79}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, address = {Versailles, France), June 2014}, keywords = {Haptics, Robotics}, doi = {10.1007/978-3-662-44196-1_10}, author = {A. Moscatelli and M. Bianchi and A. Serio and Al Atassi, O. and S. Fani and A. Terekhov and V. Hayward and M. Ernst and A. Bicchi} } @conference {2214, title = {Daily-Life Monitoring of Stroke Survivors Motor Performance: The INTERACTION Sensing System}, year = {2014}, abstract = {

The objective of the INTERACTION Eu project is to develop and validate an unobtrusive and modular system for monitoring daily life activities, physical interactions with the environment and for training upper and lower extremity motor function in stroke subjects. This paper describes the development and preliminary testing of the project sensing platform made of sensing shirt, trousers, gloves and shoes. Modular prototypes were designed and built considering the minimal set of inertial, force and textile sensors that may enable an efficient monitoring of stroke patients. The single sensing elements are described and the results of their preliminary lab-level testing are reported.

}, author = {A. Tognetti and F. Lorussi and N. Carbonaro and D. De Rossi and De Toma, G. and Mancuso, C. and Paradiso, R. and Luinge, H. and Reenalda, J. and Droog, E. and Veltink, P.} } @conference {2215, title = {Daily-life tele-monitoring of motor performance in stroke survivors}, booktitle = {Proceedings of XIII International Symposium on 3D Analysis of Human Movement}, year = {2014}, month = {17 July 2014}, pages = {159{\textendash}162}, abstract = {

The objective of the EU project INTERACTION is to develop an unobtrusive and modular sensing system for objective monitoring of daily-life motor performance of stroke survivors. This will enable clinical professionals to advise their patients about their continued daily-life activity profile and home training, and evaluate and optimize rehabilitation programs.A modular textile-integrated sensing system was developed and performance and capacity measures were proposed and clinically tested in stroke subject.Telemonitoring facilities were developed and tested. In the last stage of the project, the system will be tested during daily-life.

}, author = {Veltink, P.H. and van Meulen, F.B. and van Beijnum, B.J.F. and Klaassen, B. and Hermens, H. J. and Droog, E. and Weusthof, M. H. H. and F. Lorussi and A. Tognetti and Reenalda, J. and Nikamp, C. D. M. and Baten, C. T. M. and Buurke, J. H. and Held, J. and Luft, A. R. L. and Luinge, H. and De Toma, G. and Mancuso, C. and Paradiso, R.} } @article {2228, title = {A Decision Support System for Real-Time Stress Detection During Virtual Reality Exposure}, year = {2014}, pages = {114{\textendash}120}, abstract = {

Virtual Reality (VR) is increasingly being used in combination with psycho-physiological measures to improve assessment of distress in mental health research and therapy. However, the analysis and interpretation of multiple physiological measures is time consuming and requires specific skills, which are not available to most clinicians. To address this issue, we designed and developed a Decision Support System (DSS) for automatic classification of stress levels during exposure to VR environments. The DSS integrates different biosensor data (ECG, breathing rate, EEG) and behavioral data (body gestures correlated with stress), following a training process in which self-rated and clinical-rated stress levels are used as ground truth. Detected stress events for each VR session are reported to the therapist as an aggregated value (ranging from 0 to 1) and graphically displayed on a diagram accessible by the therapist through a web-based interface.

}, doi = {10.3233/978-1-61499-375-9-114}, author = {A. Gaggioli and P. Cipresso and Serino, S. and G. Pioggia and Tartarisco, G. and Baldus, G. and Corda, D. and M. Ferro and N. Carbonaro and A. Tognetti and D. De Rossi and Giakoumis, D. and Tzovaras, D. and Riera, A. and G. Riva} } @conference {1997, title = {Decoding 2D kinematics of human arm for body machine interfaces}, booktitle = {Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013}, year = {2014}, pages = {719{\textendash}722}, doi = {10.1109/ICIEA.2013.6566461}, url = {http://dx.medra.org/10.1109/ICIEA.2013.6566461}, author = {Gulrez, T and Kavakli-Thorne, M. and A. Tognetti} } @conference {2233, title = {Exploiting hand kinematic synergies and wearable under-sensing for hand functional grasp recognition}, booktitle = { 4th International Conference on Wireless Mobile Communication and Healthcare - "Transforming healthcare through innovations in mobile and wireless technologies" }, year = {2014}, address = {November 3{\textendash}5, 2014 Athens, Greece}, keywords = {Haptics, Robotics}, doi = { http://dx.doi.org/10.4108/icst.mobihealth.2014.257228}, author = {M. Bianchi and N. Carbonaro and E. Battaglia and F. Lorussi and A. Bicchi and D. De Rossi and A. Tognetti} } @article {2211, title = {Exploiting wearable goniometer technology for motion sensing gloves}, journal = {IEEE JOURNAL OF BIOMEDICAL AND HEALTH INFORMATICS}, year = {2014}, abstract = {

This paper presents an innovative wearable kinesthetic glove realized with knitted piezoresistive fabric (KPF) sensor technology. The glove is conceived to capture hand movement and gesture by using KPF in a double layer configuration working as angular sensors (electro-goniometers). The sensing glove prototype is endowed by three KPF goniometers, used to track flexion and extension movement of metacarpo-phalangeal joint of thumb, index and middle fingers. The glove is devoted to the continuous monitoring of patients during their daily life activities, in particular for stroke survivors during their rehabilitation. The prototype performances have been evaluated in comparison with an optical tracking system considered as a gold standard both for relieving static and dynamic posture and gesture of the hand. The introduced prototype has shown very interesting figures of merit. The angular error, evaluated through the standard Bland Altman analysis, has been estimated in ? 3? which is slightly less accurate than commercial electro-goniometers. Moreover, a new conceptual prototype design, preliminary evaluated within this work, is presented and discussed in order to solve actual limitations in terms of number and type of sensor connections, avoiding mechanical constraints given by metallic inextensible wires and improving user comfort.

}, doi = {10.1109/JBHI.2014.2324293}, author = {N. Carbonaro and Dalle Mura, G. and F. Lorussi and Paradiso, R. and D. De Rossi and A. Tognetti} } @article {1668, title = {Exploring Teleimpedance and Tactile Feedback for Intuitive Control of the Pisa/IIT SoftHand}, journal = { IEEE Transactions on Haptics}, volume = {7}, year = {2014}, pages = {203 - 215}, keywords = {Haptics, Robotics}, doi = {10.1109/TOH.2014.2309142 }, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=6755554}, author = {A. Ajoudani and S. B. Godfrey and M. G. Catalano and M. Bianchi and G. Grioli and N G Tsagarakis and A. Bicchi} } @article {2178, title = {Grasping devices and methods in automated production processes }, journal = {CIRP Annals - Manufacturing Technology}, volume = {63}, year = {2014}, pages = {679-701}, abstract = {

In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications and continues explaining different releasing strategies and principles. Then the paper classifies the numerous sensors used to monitor the effectiveness of grasping (part presence, exchanged force, stick-slip transitions, etc.). Later the grasping and releasing problems in different fields (from mechanical assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes.

}, keywords = {Robotics}, doi = {10.1016/j.cirp.2014.05.006}, url = {http://www.sciencedirect.com/science/article/pii/S0007850614001887}, author = {G Fantoni and Santochi, M. and Dini, G. and Tracht, K. and Scholz-Reiter, B. and Fleischer, J. and Kristoffer Lien, T. and Seliger, G. and Reinhart, G. and Franke, J. and N{\o}rgaard Hansen, H. and Verl, A.} } @conference {2179, title = {Gripping device for heavy and deformable materials handling: concept, design, selection and test}, booktitle = {24th CIRP Design Conference}, year = {2014}, address = {Milan, April 14 - 16}, keywords = {Robotics}, author = {Tilli, J. and Brando, A. and G Fantoni} } @inbook {1694, title = {HANDS.DVI: A DeVice-Independent programming and control framework for robotic HANDS}, booktitle = {Gearing up and accelerating cross-fertilization between academic and industrial robotics research in Europe - Technology transfer experiments from the ECHORD project}, volume = {94}, number = {Springer Tracts in Advanced Robotics}, year = {2014}, pages = {197-215}, abstract = {

The scientific goal of HANDS.DVI consists of developing a common
framework to programming robotic hands independently from their kinematics,
mechanical construction, and sensor equipment complexity. Recent results on the
organization of the human hand in grasping and manipulation are the inspiration
for this experiment. The reduced set of parameters that we effectively use to control
our hands is known in the literature as the set of synergies. The synergistic
organization of the human hand is the theoretical foundation of the innovative approach
to design a unified framework for robotic hands control. Theoretical tools
have been studied to design a suitable mapping function of the control action (decomposed
in its elemental action) from a human hand model domain onto the
articulated robotic hand co-domain. The developed control framework has been
applied on an experimental set up consisting of two robotic hands with dissimilar
kinematics grasping an object instrumented with force sensors.

}, keywords = {Haptics, Robotics}, doi = {10.1007/978-3-319-02934-4_10}, author = {G. Salvietti and G. Gioioso and M. Malvezzi and D Prattichizzo and A. Serio and E. Farnioli and M Gabiccini and A. Bicchi and I. Sarakoglou and N G Tsagarakis and D. G. Caldwell} } @article {2209, title = {Inference of Human Affective States from Psychophysiological Measurements Extracted under Ecologically Valid Conditions}, journal = {FRONTIERS IN NEUROSCIENCE}, volume = {8}, year = {2014}, abstract = {

Compared to standard laboratory protocols, the measurement of psychophysiological signals in real world experiments poses technical and methodological challenges due to external factors that cannot be directly controlled. To address this problem, we propose a hybrid approach based on an immersive and human accessible space called the eXperience Induction Machine (XIM), that incorporates the advantages of a laboratory within a life-like setting. The XIM integrates unobtrusive wearable sensors for the acquisition of psychophysiological signals suitable for ambulatory emotion research. In this paper, we present results from two different studies conducted to validate the XIM as a general-purpose sensing infrastructure for the study of human affective states under ecologically valid conditions. In the first investigation, we recorded and classified signals from subjects exposed to pictorial stimuli corresponding to a range of arousal levels, while they were free to walk and gesticulate. In the second study, we designed an experiment that follows the classical conditioning paradigm, a well-known procedure in the behavioral sciences, with the additional feature that participants were free to move in the physical space, as opposed to similar studies measuring physiological signals in constrained laboratory settings. Our results indicate that, by using our sensing infrastructure, it is indeed possible to infer human event-elicited affective states through measurements of psychophysiological signals under ecological conditions.

}, doi = {10.3389/fnins.2014.00286}, author = {A. Betella and R. Zucca and Cetnarski, A and A. Greco and A Lanata and D. Mazzei and A. Tognetti and X. D. Arsiwalla and P Omedas and D. De Rossi and Verschure, P} } @conference {2213, title = {Interpreting Psychophysiological States Using Unobtrusive Wearable Sensors in Virtual Reality}, booktitle = {Proc. of The Seventh International Conference on Advances in Computer-Human Interactions}, year = {2014}, abstract = {

One of the main challenges in the study of human be- havior is to quantitatively assess the participants? affective states by measuring their psychophysiological signals in ecologically valid conditions. The quality of the acquired data, in fact, is often poor due to artifacts generated by natural interactions such as full body movements and gestures. We created a technology to address this problem. We enhanced the eXperience Induction Machine (XIM), an immersive space we built to conduct experiments on human behavior, with unobtrusive wearable sensors that measure electrocardiogram, breathing rate and electrodermal response. We conducted an empirical validation where participants wearing these sensors were free to move in the XIM space while exposed to a series of visual stimuli taken from the International Affective Picture System (IAPS). Our main result consists in the quan- titative estimation of the arousal range of the affective stimuli through the analysis of participants? psychophysiological states. Taken together, our findings show that the XIM constitutes a novel tool to study human behavior in life-like conditions.

}, author = {A. Betella and Pacheco, D. and R. Zucca and X. D. Arsiwalla and P Omedas and A Lanata and D. Mazzei and A. Tognetti and A. Greco and N. Carbonaro and Wagner, J. and Lingenfelser, F. and Andr{\`e}, E. and D. De Rossi and Verschure, P.} } @conference {2159, title = {Manipulation Framework for Compliant Humanoid COMAN: Application to a Valve Turning Task}, booktitle = {IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014)}, year = {2014}, pages = {664 - 670}, publisher = {IEEE}, organization = {IEEE}, address = {Madrid, Spain, November 18 - 20}, abstract = {

With the purpose of achieving a desired interaction performance for our compliant humanoid robot (COMAN), in this paper we propose a semi-autonomous control framework and evaluate it experimentally in a valve turning setup. The control structure consists of various modules and interfaces to identify the valve, locate the robot in front of it and perform the manipulation. The manipulation module implements four motion primitives (Reach, Grasp, Rotate and Disengage) and realizes the corresponding desired impedance profile for each phase to accomplish the task. In this direction, to establish a stable and compliant contact between the valve and the robot hands, while being able to generate the sufficient rotational torques depending on the valve{\textquoteright}s friction, Rotate incorporates a novel dual-arm impedance control technique to plan and realize a task-appropriate impedance profile. Results of the implementation of the proposed control framework are firstly evaluated in simulation studies using Gazebo. Subsequent experimental results highlight the efficiency of the proposed impedance planning and control in generation of the required interaction forces to accomplish the task.

}, keywords = {Haptics, Robotics}, doi = {10.1109/HUMANOIDS.2014.7041434}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7041434}, author = {A. Ajoudani and J. Lee and A. Rocchi and M. Ferrati and E. Mingo Hoffman and A Settimi and D. G. Caldwell and A. Bicchi and N G Tsagarakis} } @conference {2180, title = {Method for supporting the selection of robot grippers}, booktitle = {24th CIRP Design Conference}, year = {2014}, address = {Milan, April 14 - 16}, keywords = {Robotics}, author = {G Fantoni and Capiferri, S. and Tilli, J.} } @conference {2127, title = {A modular approach for remote operation of humanoid robots in search and rescue scenarios }, booktitle = {Modelling \& Simulation for Autonomous Systems - MESAS2014}, year = {2014}, address = {Rome, 5-6 May 2014}, keywords = {Robotics}, author = {A Settimi and C. Pavan and V. Varricchio and M. Ferrati and E. Mingo and A. Rocchi and K. Melo and N G Tsagarakis and A. Bicchi} } @article {2032, title = {Modulation of isochronous movements in a flexible environment: links between motion and auditory experience}, journal = {Experimental Brain Research}, volume = {232}, year = {2014}, month = {06/2014}, pages = {1663 - 1675}, keywords = {Bioengineering}, doi = {10.1007/s00221-014-3845-9}, author = {Bravi, R. and Del Tongo, C. and Cohen, E. J. and Dalle Mura, G. and A. Tognetti and Minciacchi, D.} } @conference {1983, title = {Natural Redundancy Resolution in Dual-Arm Manipulation using Configuration Dependent Stiffness (CDS) Control}, booktitle = {2014 IEEE International Conference on Robotics and Automation}, year = {2014}, pages = {1480 - 1486}, publisher = {IEEE}, organization = {IEEE}, address = {Hong Kong, May 31 2014-June 7 2014 }, abstract = {

Incorporation of human motor control principles in the motion control architectures for humanoid robots or assistive and prosthesis devices will permit these systems not only to look anthropomorphic and natural at the body ware level but also to generate natural motion profiles resembling those executed by humans during manipulation and locomotion. In this work, relying on the observations on human bimanual coordination, a novel realtime motion control strategy is proposed to regulate the desired Cartesian stiffness profile during the execution of bimanual tasks. The novelty of the proposed control scheme relies on the use of common mode stiffness (CMS) and configuration dependent stiffness (CDS) to regulate the size and directionality of the task space stiffness ellipsoid. Thanks to the CDS control, the proposed scheme is not only proved to be effective in regulating the desired stiffness ellipsoid but also permits to resolve the manipulator redundancy in a natural manner. The effectiveness of the controller is evaluated in an experimental setup in which two cooperating robotic arms are executing an assembly task. Experimental results demonstrate that the proposed dual-arm CDS-CMS controller is effective in tracking the desired stiffness ellipsoids as well as in producing human-like natural motions for the two robotic arms.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2014.6907047}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=6945252}, author = {A. Ajoudani and N G Tsagarakis and J. Lee and M Gabiccini and A. Bicchi} } @article {2212, title = {New generation of wearable goniometers for motion capture systems}, journal = {JOURNAL OF NEUROENGINEERING AND REHABILITATION}, volume = {11}, year = {2014}, abstract = {

Background Monitoring joint angles through wearable systems enables human posture and gesture to be reconstructed as a support for physical rehabilitation both in clinics and at the patient{\textquoteright}s home. A new generation of wearable goniometers based on knitted piezoresistive fabric (KPF) technology is presented. Methods KPF single-and double-layer devices were designed and characterized under stretching and bending to work as strain sensors and goniometers. The theoretical working principle and the derived electromechanical model, previously proved for carbon elastomer sensors, were generalized to KPF. The devices were used to correlate angles and piezoresistive fabric behaviour, to highlight the differences in terms of performance between the single layer and the double layer sensors. A fast calibration procedure is also proposed. Results The proposed device was tested both in static and dynamic conditions in comparison with standard electrogoniometers and inertial measurement units respectively. KPF goniometer capabilities in angle detection were experimentally proved and a discussion of the device measurement errors of is provided. The paper concludes with an analysis of sensor accuracy and hysteresis reduction in particular configurations. Conclusions Double layer KPF goniometers showed a promising performance in terms of angle measurements both in quasi-static and dynamic working mode for velocities typical of human movement. A further approach consisting of a combination of multiple sensors to increase accuracy via sensor fusion technique has been presented.

}, doi = {10.1186/1743-0003-11-56}, author = {A. Tognetti and F. Lorussi and Dalle Mura, G. and N. Carbonaro and Pacelli, M. and Paradiso, R. and D. De Rossi} } @article {2274, title = {A novel dual-flow bioreactor simulates increased fluorescein permeability in epithelial tissue barriers}, journal = {Biotechnology journal}, year = {2014}, abstract = {

Permeability studies across epithelial barriers are of primary importance in drug delivery as well as in toxicology. However, traditional in vitro models do not adequately mimic the dynamic environment of physiological barriers. Here, we describe a novel two-chamber modular bioreactor for dynamic in vitro studies of epithelial cells. The fluid dynamic environment of the bioreactor was characterized using computational fluid dynamic models and measurements of pressure gradients for different combinations of flow rates in the apical and basal chambers. Cell culture experiments were then performed with fully differentiated Caco-2 cells as a model of the intestinal epithelium, comparing the effect of media flow applied in the bioreactor with traditional static transwells. The flow increases barrier integrity and tight junction expression of Caco-2 cells with respect to the static controls. Fluorescein permeability increased threefold in the dynamic system, indicating that the stimulus induced by flow increases transport across the barrier, closely mimicking the in vivo situation. The results are of interest for studying the influence of mechanical stimuli on cells, and underline the importance of developing more physiologically relevant in vitro tissue models. The bioreactor can be used to study drug delivery, chemical, or nanomaterial toxicity and to engineer barrier tissues.

}, keywords = {Bioengineering}, issn = {1860-7314}, doi = {10.1002/biot.201400004}, url = {http://www.ncbi.nlm.nih.gov/pubmed/24756869}, author = {S. Giusti and Sbrana, T. and La Marca, M and V. Di Patria and V. Martinucci and Tirella, A and C. Domenici and A. Ahluwalia} } @conference {2183, title = {Object shaping with a sonotrode}, booktitle = { 25th symposium on Free Form Fabrication}, year = {2014}, keywords = {Robotics}, author = {Tilli, J. and G Fantoni and Currenti, S. and Razionale, A. V.} } @conference {2120, title = {The Patched Intrinsic Tactile Object: a Tool to Investigate Human Grasps}, booktitle = {Proc. IEEE/RSJ Intl Conf. on Intelligent Robots and Systems (IROS 2014)}, year = {2014}, pages = {1261 - 1268}, address = {Chicago, USA}, abstract = {

In this paper we report on the development of a modular multi-DoF F/T sensor and its use in the implementation of a sensorized object capable of multi-touch detection. The sensor is composed of six 6-axis F/T sensors spatially organized on the faces of a cube. Different calibration methods are presented to directly tackle the coupling phenomena inherent to the spatial organization of the faces and the lightweight construction of the sensor which would have, otherwise, degraded its accuracy. To assess the performances of the calibration methods, a comparison is reported with respect to the measurements obtained with a commercial force/torque sensor considered as ground truth (ATI Delta). Thanks to the modular design and the possibility to cover the sensitive faces with surface patches of different geometry, a variety of sensorized objects with different shapes can be realized. The peculiar feature that all the components of the contact wrench can be measured on each face with high accuracy, renders it a unique tool in the study of grasp force distribution in humans, with envisioned use both in neuroscience investigations and robotic applications.

}, keywords = {Haptics, Robotics}, doi = {10.1109/IROS.2014.6942719}, author = {A. Serio and E. Riccomini and V. Tartaglia and I. Sarakoglou and M Gabiccini and N G Tsagarakis and A. Bicchi} } @conference {1996, title = {Piezoresistive Goniometer Network for Sensing Gloves}, booktitle = {Proceedings of the XIII Mediterranean Conference on Medical and Biological Engineering and Computing}, year = {2014}, pages = {1547{\textendash}1550}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, doi = {10.1007/978-3-319-00846-2_382}, url = {http://dx.medra.org/10.1007/978-3-319-00846-2_382}, author = {Dalle Mura, G. and F. Lorussi and A. Tognetti and G. Anania and N. Carbonaro and M. Pacelli and R. Paradiso and D. De Rossi} } @article {2210, title = {Psychometric Assessment of Cardio-Respiratory Activity Using a Mobile Platform}, journal = {INTERNATIONAL JOURNAL OF HANDHELD COMPUTING RESEARCH}, volume = {5}, year = {2014}, pages = {13{\textendash}29}, abstract = {

Stress is an increasingly recognized phenomenon that has negative effects on growing numbers of people. Stress assessment is a complex issue, but different studies have shown that monitoring user psychophysi- ological parameter during daily life can be greatly helpful in stress evaluation. In this context, the European Collaborative Project INTERSTRESS is aimed at designing and developing advanced simulation and sensing technologies for the assessment and treatment of psychological stress, based on mobile biosensors.In this study a wearable biosensor platform able to collect physiological and behavioral parameters is reported. The developed mobile platform, in terms of hardware and processing algorithms, is described. Moreover the use of this wearable biosensor platform in combination with advanced simulation technologies, such as virtual reality, offer interesting opportunities for innovative personal health-care solutions to stress.

}, doi = {10.4018/ijhcr.2014010102}, author = {N. Carbonaro and Cipresso, P and A. Tognetti and G. Anania and D. De Rossi and Pallavicini, F and A. Gaggioli and Riva, G} } @article {2202, title = {Realisation and characterization of conductive hollow fibers for neuronal tissue engineering}, journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials}, year = {2014}, keywords = {Bioengineering}, author = {Gattazzo, F. and C. De Maria and Whulanza, Y. and Taverni, G. and A. Ahluwalia and G. Vozzi} } @conference {2275, title = {Sensorized Squeeze Pressure Bioreactor For mechanical modulation of cardiomyocyte phenotype}, booktitle = {Journal of tissue engineering and regenerative medicine}, volume = {8 Suppl 1}, year = {2014}, pages = {67{\textendash}8}, keywords = {Bioengineering}, doi = {10.1002/term.1943}, url = {http://www.ncbi.nlm.nih.gov/pubmed/24912686}, author = {S. Giusti and Vozzi, F. and F. Pagliari and Tirella, A and D. Mazzei and Cabiati, M and S. del Ry and A. Ahluwalia} } @conference {2181, title = {Shaping of foam-like materials through the use of a sonotrode}, booktitle = { International Conference On Innovative Design And Manufacturing}, year = {2014}, address = {Montreal, Quebec, Canada, August 13-15}, keywords = {Robotics}, author = {G Fantoni and Tilli, J. and F. A. W. Belo and Ishak, R.} } @article {2290, title = {Sphyga: a multiparameter open source tool for fabricating smart and tunable hydrogel microbeads}, journal = {Biofabrication}, volume = {6}, year = {2014}, keywords = {Bioengineering}, doi = {10.1088/1758-5082/6/2/025009}, author = {Tirella, A and C. Magliaro and M. Penta and M. Troncone and Pimentel, R and A. Ahluwalia} } @conference {2182, title = {Underwater drilling of foam-like materials and wax using ultrasound technology}, booktitle = {International Conference On Innovative Design And Manufacturing}, year = {2014}, address = {Montreal, Quebec, Canada, August 13-15}, keywords = {Robotics}, author = {Tilli, J. and G Fantoni and Currenti, S.} } @conference {2160, title = {Upper-body Impedance Control with an Intuitive Stiffness Emulation for a Door Opening Task}, booktitle = {IEEE-RAS International Conference on Humanoid Robots (HUMANOIDS 2014)}, year = {2014}, pages = {713 - 719}, publisher = {IEEE}, organization = {IEEE}, address = {Madrid, Spain, November 18 - 20}, abstract = {

The advent of humanoids has brought new challenges in the real-world application. As a part of ongoing efforts to foster functionality of the robot accommodating a real environment, this paper introduces a recent progress on a door opening task with our compliant humanoid, CoMan. We presents a task-prioritized impedance control framework for an upper body system that includes a dual-arm, a waist, two soft hands, and 3D camera. Aimed to create desired responses to open the door, a novel stiffness modulation method is proposed, incorporating a realtime optimization. As a preliminary experiment, a full door-opening scenario (approaching to the door and reaching, grasping, rotating and pulling the door handle) is demonstrated under a semi-autonomous operation with a pilot. The experimental result shows the effectiveness and efficacy of the proposed impedance control approach. Despite of uncertainties from sensory data, the door opening task is successfully achieved and safe and robust interaction is established without creating excessive forces.

}, keywords = {Robotics}, doi = {10.1109/HUMANOIDS.2014.7041441}, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7041441}, author = {J. Lee and A. Ajoudani and E. Mingo Hoffman and A. Rocchi and A Settimi and M. Ferrati and A. Bicchi and N G Tsagarakis and D. G. Caldwell} } @conference {2037, title = {Velvet Fingers: Grasp Planning and Execution for an Underactuated Gripper with Active Surfaces}, booktitle = {2014 IEEE International Conference on Robotics and Automation}, year = {2014}, pages = {3669 - 3675}, publisher = {IEEE}, organization = {IEEE}, address = {Hong Kong, May 31 2014-June 7 2014}, abstract = {

In this work we tackle the problem of planning grasps for an underactuated gripper which enable it to retrieve target objects from a cluttered environment. Furthermore, we investigate how additional manipulation capabilities of the gripping device, provided by active surfaces on the inside of the fingers, can lead to performance improvement in the grasp execution process. To this end, we employ a simple strategy, in which the target object is {\textquoteleft}pulled-in{\textquoteright} towards the palm during grasping which results in firm enveloping grasps. We show the effectiveness of the suggested methods by means of experiments conducted in a real-world scenario.

}, keywords = {Haptics, Robotics}, doi = {10.1109/ICRA.2014.6907390 }, url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=6907390}, author = {R. Krug and T. Stoyanov and M. Bonilla and V. Tincani and N. Vaskeviciusz and G Fantoni and A. Birkz and A. Lilienthal and A. Bicchi} } @conference {2226, title = {XIM-Engine: a software framework to support the development of interactive applications that uses conscious and unconscious reactions in immersive mixed reality}, booktitle = {VIRTUAL REALITY INTERNATIONAL CONFERENCE}, year = {2014}, abstract = {

The development of systems that allow multimodal interpretation of human-machine interaction is crucial to advance our understanding and validation of theoretical models of user behavior. In particular, a system capable of collecting, perceiving and interpreting unconscious behavior can provide rich contextual information for an interactive system. One possible application for such a system is in the exploration of complex data through immersion, where massive amounts of data are generated every day both by humans and computer processes that digitize information at different scales and resolutions thus exceeding our processing capacity. We need tools that accelerate our understanding and generation of hypotheses over the datasets, guide our searches and prevent data overload. We describe XIM- engine, a bio-inspired software framework designed to capture and analyze multi-modal human behavior in an immersive environment. The framework allows performing studies that can advance our understanding on the use of conscious and unconscious reactions in interactive systems.

}, author = {P. Omedas and A. Betella and Zucca, R. and X. D. Arsiwalla and Pacheco, D. and J. Wagner and F. Lingenfelser and D. Mazzei and A Lanata and A. Tognetti and Goldhoorn, A. and Guerra, E. and Alqu{\`\i}zar, R. and Grau, A. and Sanfeliu, A. and D. De Rossi and E. Andr{\'e} and P. F. M. J. Verschure} } @conference {2077, title = {Yarp Based Plugins for Gazebo Simulator}, booktitle = {2014 Modelling and Simulation for Autonomous Systems Workshop (MESAS)}, year = {2014}, address = {Roma, Italy, 5 -6 May 2014}, keywords = {Robotics}, author = {Mingo, E and Traversaro, S and Rocchi, A and M. Ferrati and A Settimi and Romano, F and Natale, L and A. Bicchi and Nori, F and N G Tsagarakis} } @article {1994, title = {An Activity Classifier based on Heart Rate and Accelerometer Data Fusion}, journal = {INTERNATIONAL JOURNAL OF BIOELECTROMAGNETISM}, volume = {15}, year = {2013}, pages = {7{\textendash}12}, issn = {1456-7857}, author = {Curone, D. and Secco, E. L. and A. Tognetti and G. Magenes} } @conference {1812, title = {Advanced Interfaces to Stem the Data Deluge in Mixed Reality: Placing Human (un)consciuosness in the Loop}, booktitle = {ACM SIGGRAPH 2013}, year = {2013}, address = {New York, NY, USA}, keywords = {Bioengineering}, url = {10.1145/2503385.2503460}, author = {A. Betella and E. Mart{\`\i}nez and R. Zucca and X. D. Arsiwalla and P Omedas and S. Wierenga and A. Mura and J. Wagner and F. Lingenfelser and E. Andr{\'e} and D. Mazzei and A. Tognetti and A Lanata and D. De Rossi and P. F. M. J. Verschure} } @article {1781, title = {Collagen VI regulates satellite cell self-renewal and muscle regeneration}, journal = {Nat Commun}, volume = {4}, year = {2013}, keywords = {Bioengineering}, doi = {10.1038/ncomms2964}, author = {Urciuolo, A and M. Quarta and V. Morbidoni and Gattazzo, F and S. Molon and P. Grumati and F. Montemurro and F. S. Tedesco and B. Blaauw and G. Cossu and G. Vozzi and T. A. Rando and Bonaldo, P} } @article {2258, title = {Computational Analysis of a Radiofrequency Knee Coil for Low-Field MRI Using FDTD}, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {389-400}, doi = {10.1007/s00723-012-0388-8}, author = {V. Hartwig and Tassano, S. and Mattii, A. and N. Vanello and V. Positano and M. F. Santarelli and L. Landini and G. Giovannetti} } @conference {1667, title = {Controlling the active surfaces of the Velvet Fingers: sticky to slippy fingers}, booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2013}, year = {2013}, month = {November 3-7}, pages = {5494 - 5499}, address = {Tokyo, Japan}, abstract = {

Industrial grippers are often used for grasping, while in-hand re-orientation and positioning are dealt with by other means. Contact surface engineering has been recently proposed as a possible mean to introduce dexterity in simple grippers, as in the Velvet Fingers smart gripper, a novel concept of end-effector combining simple under-actuated mechanics and high manipulation possibilities, thanks to conveyors which are built in the finger pads. This paper undergoes the modeling and control of the active conveyors of the Velvet Fingers gripper which are rendered able to emulate different levels of friction and to apply tangential thrusts to the contacted objects. Through the paper particular attention is dedicated to the mechanical implementation, sense drive and control electronics of the device. The capabilities of the prototype are showed in some grasping and manipulation experiments.

}, keywords = {Robotics}, doi = {10.1109/IROS.2013.6697152}, url = {http://ieeexplore.ieee.org/xpl/login.jsp?tp=\&arnumber=6697152\&url=http\%3A\%2F\%2Fieeexplore.ieee.org\%2Fxpls\%2Fabs_all.jsp\%3Farnumber\%3D6697152}, author = {V. Tincani and G. Grioli and M. G. Catalano and M. Bonilla and M. Garabini and G Fantoni and A. Bicchi} } @inbook {1787, title = {Da scaffold a tessuti: progettazione, realizzazione e caratterizzazione di architetture 3D per la medicina rigenerativa }, booktitle = {Approccio Integrato per la medicina rigenerativa - book of XXXII School of Bioengineering}, year = {2013}, keywords = {Bioengineering}, author = {Tirella, A and C. De Maria and G. Vozzi and A. Ahluwalia} } @article {2250, title = {FDTD Analysis of a Radiofrequency Knee Coil for Low-Field MRI: Sample-Induced Resistance and Decoupling Evaluation }, journal = {APPLIED MAGNETIC RESONANCE}, volume = {44}, year = {2013}, pages = {1393 - 1403}, doi = {10.1007/s00723-013-0488-0}, author = {Morelli, M. S. and V. Hartwig and Tassano, S. and N. Vanello and V. Positano and M. F. Santarelli and Carrozzi, A. and L. Landini and G. Giovannetti} } @conference {1798, title = {Gelatin-Hydroxyapatite hydrogels to investigate periosteal derived progenitor cells (PDPCs) response for tissue engineering applications}, booktitle = {Advanced Cell Culture}, year = {2013}, address = {Liverpool, UK}, keywords = {Bioengineering}, author = {G. Mattei and Tirella, A and Mattioli-Belmonte, M. and Ferretti, C and A. Ahluwalia} } @conference {1434, title = {Human-Like Impedance and Minimum Effort Control for Natural and Efficient Manipulation}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2013)}, year = {2013}, pages = {4499 - 4505}, keywords = {Robotics}, doi = {10.1109/ICRA.2013.6631216 }, author = {A. Ajoudani and M Gabiccini and N G Tsagarakis and A. Bicchi} } @conference {1438, title = {Implementation and Control of the Velvet Fingers: a Dexterous Gripper with Active Surfaces}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2013)}, year = {2013}, pages = {2744 - 2750}, keywords = {Haptics, Robotics}, url = {10.1109/ICRA.2013.6630955 }, author = {V. Tincani and G. Grioli and M. G. Catalano and M. Garabini and S. Grechi and G Fantoni and A. Bicchi} } @article {1791, title = {In vitro toxicological screening of nanoparticles on primary human endothelial cells and the role of flow in modulating cell response}, journal = {Nanotoxicology}, year = {2013}, abstract = {

Abstract After passage through biological barriers, nanomaterials inevitably end up in contact with the vascular endothelium and physiological flow, and can induce cardiovascular damage. In this study the toxicity and sublethal effects of 6 nanoparticles, including 4 of industrial and biomedical importance, on human endothelial cells was investigated using different in vitro assays. The results show that all the particles investigated induce some level of damage to the cells and that silver particles were most toxic, followed by titanium dioxide. Furthermore endothelial cells were shown to be more susceptible when exposed to silver nanoparticles under flow conditions in a bioreactor. The study underlines that although simple in vitro tests are useful to screen compounds and to identify the type of effect induced on cells, they may not be sufficient to define safe exposure limits. Therefore, once initial toxicity screening has been conducted on nanomaterials, it is necessary to develop more physiologically relevant in vitro models to better understand how nanomaterials can impact on human health.

}, keywords = {Bioengineering}, issn = {1743-5404}, doi = {10.3109/17435390.2013.831500}, url = {http://www.ncbi.nlm.nih.gov/pubmed/23909703}, author = {Ucciferri, N and Collnot, E. M. and Gaiser, B. and Tirella, A and Stone, V. and C. Domenici and Lehr, C.-M. and A. Ahluwalia} } @conference {2144, title = {Increased Instability of Heartbeat Dynamics in Parkinson{\textquoteright}s Disease}, booktitle = {Computers in Cardiology}, year = {2013}, keywords = {Bioengineering}, author = {R. Barbieri and L. Citi and G. Valenza and M. Guerrisi and S. Orsolini and C. Tessa and S. Diciotti and N. Toschi} } @conference {1995, title = {An Innovative Multisensor Controlled Prosthetic Hand}, booktitle = {Proceedings of the XIII Mediterranean Conference on Medical and Biological Engineering and Computing}, year = {2013}, pages = {93{\textendash}96}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, doi = {10.1007/978-3-319-00846-2_23}, url = {http://dx.medra.org/10.1007/978-3-319-00846-2_23}, author = {N. Carbonaro and G. Anania and Bacchereti, M. and Donati, G. and Ferretti, G. and Pellicci, L. and Parrini, G. and Vitetta, N. and D. De Rossi and A. Tognetti} } @conference {1814, title = {A Mobile Biosensor to detect Cardiorespiratory Activity for Stress Tracking}, booktitle = {IEEE 7th International Conference on Pervasive Computing Technologies for Healthcare (PervasiveHealth)}, year = {2013}, pages = {440 - 445 }, address = {Venice, Italy}, abstract = {

Stress is an increasingly recognized phenomenon that has negative effects on growing numbers of people. Stress assessment is a complex issue, but different studies have shown that monitoring user psychophysiological parameter during daily life can be greatly helpful in stress evaluation. In this study a wearable biosensor platform able to collect physiological and behavioral parameters is reported. The developed wearable platform, in terms of hardware and processing algorithms, is described. Moreover the use of this wearable biosensor platform in combination with advanced simulation technologies, such as virtual reality offer interesting opportunities for innovative personal health-care solutions to stress. A recently founded European project, "INTERSTRESS - Interreality in the management and treatment of stress-related disorders," will take into account these relevant aspects.

}, keywords = {Bioengineering}, issn = {978-1-4799-0296-5 }, author = {N. Carbonaro and A. Tognetti and G. Anania and D. De Rossi and P. Cipresso and A. Gaggioli and G. Riva} } @conference {1813, title = {Novel Spiking Neuron-Astrocyte Networks based on NoNlinearTransistor-Like Models of Tripartite Synapses}, booktitle = {Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC{\textquoteright}13)}, year = {2013}, address = {Osaka, Japan}, abstract = {

In this paper a novel and efficient computational implementation of a Spiking Neuron-Astrocyte Network (SNAN) is reported. Neurons are modeled according to the Izhikevich formulation and the neuron-astrocyte interactions are intended as tripartite synapsis and modeled with the previ- ously proposed nonlinear transistor-like model. Concerning the learning rules, the original spike-timing dependent plasticity is used for the neural part of the SNAN whereas an ad-hoc rule is proposed for the astrocyte part. SNAN performances are compared with a standard spiking neural network (SNN) and evaluated using the polychronization concept, i.e., number of co-existing groups that spontaneously generate patterns of polychronous activity. The astrocyte-neuron ratio is the biologically inspired value of 1.5. The proposed SNAN shows higher number of polychronous groups than SNN, remarkably achieved for the whole duration of simulation (24 hours).

}, keywords = {Bioengineering}, author = {G. Valenza and L. Tedesco and A Lanata and D. De Rossi and E. P. Scilingo} } @conference {1447, title = {Optimal Control for Maximizing Velocity of the CompActTM Compliant Actuator}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2013)}, year = {2013}, pages = {516 - 522}, keywords = {Robotics}, url = {10.1109/ICRA.2013.6630623}, author = {L. Chen and M. Garabini and M. Laffranchi and N. Kashiri and N G Tsagarakis and A. Bicchi and D. G. Caldwell} } @conference {2243, title = {Piezoresistive Goniometer Network for Sensing Gloves}, booktitle = {Proceedings of the XIII Mediterranean Conference on Medical and Biological Engineering and Computing}, year = {2013}, pages = {1547{\textendash}1550}, publisher = {Springer International Publishing}, organization = {Springer International Publishing}, abstract = {

This paper presents a kinesthetic glove realized with knitted piezoresistive fabric (KPF) sensor technology. The glove forefinger area is sensorized by two KPF goniometers obtained on the same piezoresistive substrate. The piezoresistive textile is used for the realization of both electrogoniometers and connections, thus avoiding mechanical constraints due to metallic wires. Sensors are characterized in comparison with commercial goniometers. The glove behavior is pointed out in terms of methacarpal-phalangeal and interphalangeal joint movement reconstruction.

}, keywords = {Bioengineering}, doi = {10.1007/978-3-319-00846-2_382}, author = {G. Dalle Mura and F. Lorussi and A. Tognetti and G. Anania and N. Carbonaro and M. Pacelli and R. Paradiso and D. De Rossi} } @conference {1998, title = {A Sensing Architecture for Empathetic Data Systems}, booktitle = {ACM International Conference Proceeding Series}, year = {2013}, month = {7-8 March}, pages = {{\textendash}}, publisher = {ACM Digital Library}, organization = {ACM Digital Library}, doi = {10.1145/2459236.2459253}, url = {http://dx.medra.org/10.1145/2459236.2459253}, author = {J. Wagner and F. Lingenfelser and E. Andr{\'e} and D. Mazzei and A. Tognetti and D. De Rossi and A. Betella and R. Zucca and P Omedas and P. F. M. J. Verschure} } @article {1993, title = {A Sensorized Garment Controlled Virtual Robotic Wheelchair}, journal = {JOURNAL OF INTELLIGENT \& ROBOTIC SYSTEMS}, year = {2013}, pages = {{\textendash}}, issn = {0921-0296}, doi = {10.1007/s10846-013-9839-1}, url = {http://dx.medra.org/10.1007/s10846-013-9839-1}, author = {Gulrez, T and A. Tognetti} } @article {1784, title = {Silk Fibroin/Gelatin Blend Films Crosslinked with Enzymes for Biomedical Applications}, year = {2013}, keywords = {Bioengineering}, doi = {10.1002/mabi.201300156}, author = {P. Taddei and V. Chiono and A. Anghileri and G. Vozzi and G. Freddi and G. Ciardelli} } @conference {1793, title = {{SpHyGa: fabrication of hepatic lobule replicas using tissue derived material composites}}, booktitle = {ESB 2013}, year = {2013}, pages = {ID 520}, address = {Madrid}, keywords = {Bioengineering}, author = {M. La Marca and Tirella, A and G. Mattei and A. Ahluwalia} } @article {2281, title = {SQPR 3.0: A Sensorized Bioreactor for Modulating Cardiac Phenotype}, journal = {Procedia Engineering}, volume = {59}, year = {2013}, pages = {219{\textendash}225}, abstract = {

In cardiac tissue engineering, the use of bioreactors is fundamental for applying controlled mechanical stimuli on cells and recreate a physiological environment for cardiomyocyte cultures. This work is focused on the design of a sensorized Squeeze Pressure bioreactor (SQPR 3.0) able to apply a periodic contactless hydrodynamic pressure on tissue constructs. This system was then tested with H2c9, a murine cardiomyoblast cell line, to investigate the effect of different stimulation times (2h, 24h, 30h) on cell shape and cardiotypic marker expression.

}, keywords = {Bioengineering}, issn = {18777058}, doi = {10.1016/j.proeng.2013.05.114}, url = {http://linkinghub.elsevier.com/retrieve/pii/S187770581301028X}, author = {S. Giusti and F. Pagliari and Vozzi, F. and Tirella, A and D. Mazzei and Cabiati, M and S. del Ry and A. Ahluwalia} } @article {1790, title = {{Strain rate viscoelastic analysis of soft and highly hydrated biomaterials.}}, journal = {Journal of biomedical materials research. Part A}, year = {2013}, abstract = {

Measuring the viscoelastic behaviour of highly hydrated biological materials is challenging because of their intrinsic softness and labile nature. In these materials it is difficult to avoid pre-stress and therefore to establish precise initial stress and strain conditions for lumped parameter estimation using creep or stress-relaxation tests. We describe a method ($ε$M or epsilon dot method) for deriving the viscoelastic parameters of soft hydrated biomaterials which avoids pre-stress and can be used to rapidly test degradable samples. Standard mechanical tests are first performed compressing samples using different strain rates. The dataset obtained is then analysed to mathematically derive the material{\textquoteright}s viscoelastic parameters. In this work a stable elastomer, PDMS, and a labile hydrogel, gelatin, were first tested using the $ε$M, in parallel stress-relaxation was used to compare lumped parameter estimation. After demonstrating that the elastic parameters are equivalent and that the estimation of short time constants is more precise using the proposed method, the viscoelastic behaviour of porcine liver was investigated using this approach. The results show that the constitutive parameters of hepatic tissue can be quickly quantified without the application of any pre-stress and before the onset of time dependent degradation phenomena.

}, keywords = {Bioengineering}, issn = {1552-4965}, doi = {10.1002/jbm.a.34914}, url = {http://www.ncbi.nlm.nih.gov/pubmed/23946054}, author = {Tirella, A and G. Mattei and A. Ahluwalia} } @article {1999, title = {Struttura protesica per amputazione mano}, volume = {PI2013A000004}, year = {2013}, pages = {{\textendash}}, author = {Bacchereti, M. and N. Carbonaro and GABRIELE, D. and FERRETTI, L. and PELLICCI, G. and A. Tognetti and Vitetta, N.} } @booklet {2229, title = {Struttura protesica per amputazione mano}, year = {2013}, author = {Bacchereti, M. and N. Carbonaro and G. Dalle Mura and FERRETTI, L. and PELLICCI, G. and A. Tognetti and Vitetta, N.} } @conference {1435, title = {Tele-Impedance based Stiffness and Motion Augmentation for a Knee Exoskeleton Device}, booktitle = {IEEE International Conference on Robotics and Automation (ICRA2013)}, year = {2013}, pages = {2194 - 2200}, keywords = {Robotics}, url = {10.1109/ICRA.2013.6630872}, author = {N. Karavas and A. Ajoudani and N G Tsagarakis and J. Saglia and A. Bicchi and D. G. Caldwell} } @conference {1666, title = {Teleimpedance Control of a Synergy-Driven Anthropomorphic Hand}, booktitle = {IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2013}, year = {2013}, month = {November 3-7}, pages = {1985 - 1991}, address = {Tokyo, Japan}, keywords = {Haptics, Robotics}, doi = {10.1109/IROS.2013.6696620 }, author = {A. Ajoudani and S. B. Godfrey and M. G. Catalano and G. Grioli and N G Tsagarakis and A. Bicchi} } @conference {1802, title = {Towards a controlled and monitorable hepatic micro-environment}, booktitle = {Advanced Cell Culture}, year = {2013}, address = {Liverpool, UK}, keywords = {Bioengineering}, author = {Tirella, A and La Marca, M and Carroll, L. A. and Aylott, J and A. Ahluwalia} } @article {1698, title = {Variable Impedance Actuators: a Review}, journal = {Robotics and Autonomous Systems}, volume = {61}, year = {2013}, note = {

Available online 6 August 2013

}, month = {12/2013}, pages = {1601{\textendash}1614}, abstract = {

Variable Impedance Actuators (VIA) have received increasing attention in recent years as many novel applications involving interactions with an unknown and dynamic environment including humans require actuators with dynamics that are not well-achieved by classical stiff actuators. This paper presents an overview of the different VIAs developed and proposes a classification based on the principles through which the variable stiffness and damping are achieved. The main classes are active impedance by control, inherent compliance and damping actuators, inertial actuators, and combinations of them, which are then further divided into subclasses. This classification allows for designers of new devices to orientate and take inspiration and users of VIA{\textquoteright}s to be guided in the design and implementation process for their targeted application.

}, keywords = {Robotics, Soft robotics, Variable Impedance Actuators}, url = {http://www.sciencedirect.com/science/article/pii/S0921889013001188}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and O. Eiberger and W. Friedl and G. Ganesh and M. Garabini and M. Grebenstein and G. Grioli and S. Haddadin and H. Hoppner and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {1241, title = {Adaptive Synergies: an approach to the design of under-actuated robotic hands}, booktitle = {International Conference of Intelligent Robots and Systems - IROS 2012}, year = {2012}, month = {October 7 - 12}, pages = {1251 - 1256 }, address = {Vilamoura, Algarve, Portugal}, keywords = {Robotics}, doi = {10.1109/IROS.2012.6385881 }, author = {G. Grioli and M. G. Catalano and E. Silvestro and S. Tono and A. Bicchi} } @article {2000, title = {Assessment of Sensing Fire Fighters Uniforms for Physiological Parameter Measurement in Harsh Environment}, journal = {IEEE TRANSACTIONS ON INFORMATION TECHNOLOGY IN BIOMEDICINE}, volume = {16}, year = {2012}, pages = {501{\textendash}511}, issn = {1089-7771}, doi = {10.1109/TITB.2011.2182615}, url = {http://dx.medra.org/10.1109/TITB.2011.2182615}, author = {Curone, D. and Secco, E. L. and Caldani, L. and A Lanata and R. Paradiso and A. Tognetti and G. Magenes} } @article {1480, title = {Cognitive reappraisal and acceptance distinctively impact heart rate variability in socially anxious individuals}, journal = {International Journal of Psychophysiology}, volume = {85}, year = {2012}, pages = {339}, keywords = {Bioengineering}, author = {Cristea, I. and G. Valenza and C. Gentili and Tatar, A.S. and E. P. Scilingo and David, D.} } @conference {1801, title = {Continuous functionally graded materials (cFGMs) for TE}, booktitle = {TERMIS 3rd World Congress}, year = {2012}, address = {Vienna, Austria}, abstract = {

Biological structures are not uniform but possess spatially distributed functions and properties, or functional gradients. To ensure functional, mechanical and structural integration, a tissue engineered (TE) scaffold has to reproduce these functional gradients. However the fabrication of functionally graded materials is challenging and usually an experimental trial-and-error approach is used. In this work we present a controlled method for the fabrication of cFGMs using the gravitational sedimentation of discrete solid particles within a primary fluid phase. To have an overall control over particle distribution, a time-varying dynamic viscosity solution (i.e. thermo-sensitive) was used as fluid phase. Computational fluid dynamic models were developed to have a fine control over particle distribution. Biomimetic osteochondral cFGMs scaffolds were fabricated using hydroxyapatite (HA) and gelatin. Glutaraldehyde was used to covalently bind gelatin-HA graded scaffolds. Mechanical properties were measured and correlated as a function of HA volume fraction. SEM-EDX analysis was used to further characterise HA content and its distribution within gelatin-HA cFGMs. Finally gelatin-HA cFGMs scaffold were seeded using periosteum derived progenitor cells, to investigate how the HA gradient modulates cell response. This approach represents an innovative yet simple tool for the fabrication of tailored cFGMs with biologically and physiologically relevant gradients for TE applications.

}, keywords = {Bioengineering}, author = {G. Mattei and A. Ahluwalia and Ferretti, C and Mattioli-Belmonte, M. and Tirella, A} } @article {1330, title = {Functionally Graded Materials (FGMs) with predictable and controlled gradient profiles: computational modelling and realisation}, journal = {International Journal for Computational Methods in Engineering Science \& Mechanics (CMES)}, year = {2012}, pages = {accepted}, keywords = {Bioengineering}, author = {G. Mattei and Tirella, A and A. Ahluwalia} } @inbook {1875, title = {Further Advances in Unmanned Marine Vehicles}, year = {2012}, pages = {309{\textendash}330}, publisher = {IET}, organization = {IET}, chapter = {The enhanced FOLAGA: a hybrid glider/propelled AUV capable of carrying universal payload modules}, address = {Londra}, keywords = {Robotics}, isbn = {9781849194792}, author = {A. Caffaz and A. Caiti and V. Calabr{\`o} and G. Casalino and A Maguer and A. Munaf{\`o} and J.R. Potter and H Tay and A. Turetta} } @article {1475, title = {Gait and Anthropometric Profile Biometrics: A Step Forward}, journal = {Second Generation Biometrics: The Ethical, Legal and Social Context}, year = {2012}, pages = {105{\textendash}127}, keywords = {Bioengineering}, author = {Ioannidis, D. and Tzovaras, D. and Mura, G.D. and M. Ferro and G. Valenza and A. Tognetti and G. Pioggia} } @inbook {2002, title = {Immersive Multimodal Interactive Presence}, booktitle = {Immersive Multimodal Interactive Presence}, year = {2012}, pages = {215{\textendash}228}, publisher = {SPRINGER-VERLAG}, organization = {SPRINGER-VERLAG}, chapter = {FMRI Compatible Sensing Glove for Hand Gesture Monitoring}, address = {LONDON {\textendash} GBR}, isbn = {9781447127536}, doi = {10.1007/978-1-4471-2754-3_12}, url = {http://dx.medra.org/10.1007/978-1-4471-2754-3_12}, author = {N. Vanello and V. Hartwig and E. P. Scilingo and D. Bonino and E. Ricciardi and A. Tognetti and P. Pietrini and D. De Rossi and L. Landini and A. Bicchi} } @article {1329, title = {The impact of fabrication parameters and substrate stiffness in direct writing of living constructs}, journal = {Biotechnology progress}, volume = {28}, year = {2012}, pages = {1315{\textendash}1320}, abstract = {

Biomolecules and living cells can be printed in high-resolution patterns to fabricate living constructs for tissue engineering. To evaluate the impact of processing cells with rapid prototyping (RP) methods, we modeled the printing phase of two RP systems that use biomaterial inks containing living cells: a high-resolution inkjet system (BioJet) and a lower-resolution nozzle-based contact printing system (PAM(2) ). In the first fabrication method, we reasoned that cell damage occurs principally during drop collision on the printing surface, in the second we hypothesize that shear stresses act on cells during extrusion (within the printing nozzle). The two cases were modeled changing the printing conditions: biomaterial substrate stiffness and volumetric flow rate, respectively, in BioJet and PAM(2) . Results show that during inkjet printing impact energies of about 10(-8) J are transmitted to cells, whereas extrusion energies of the order of 10(-11) J are exerted in direct printing. Viability tests of printed cells can be related to those numerical simulations, suggesting a threshold energy of 10(-9) J to avoid permanent cell damage. To obtain well-defined living constructs, a combination of these methods is proposed for the fabrication of scaffolds with controlled 3D architecture and spatial distribution of biomolecules and cells. {\textcopyright} 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012.

}, keywords = {Bioengineering}, issn = {1520-6033}, doi = {10.1002/btpr.1586}, url = {http://www.ncbi.nlm.nih.gov/pubmed/22736619}, author = {Tirella, A and A. Ahluwalia} } @conference {2003, title = {INTERACTION, Training and monitoring of daily-life physical interaction with the environment after stroke}, booktitle = {Proceedings of XII International Symposium on 3D Analysis of Human Movement}, year = {2012}, pages = {{\textendash}}, author = {Veltink, PH and van Meulen, FB and van Beijnum, BJF and Hermens, HJ and D. De Rossi and F. Lorussi and A. Tognetti and Buurke, JH and Reenalda, J and Baten, CTM and Simons, CDM and Luft, AR L and Schepers, HM and Luinge, HJ and R. Paradiso and Orselli, R} } @conference {1804, title = {Monitoring cell culture 3D microenvironments: oxygen and pH nano-sensors within hydrogels}, booktitle = {National Conference of Bioengineering}, year = {2012}, address = {Rome, Italy}, abstract = {

Ratiometric pH and O2 nanosensors were fabricated independently using a fluorophore that produces a signal proportional to the concentration of the analyte of interest, and a second fluorophore that produces a reference signal, insensitive to the analyte of interest. These fluorophores emit at different wavelengths and were either entrapped or covalently bound, within an inert optically transparent polymeric matrix. In this work uniform sized 3D micro-scaled alginate hydrogel constructs of approximately 100-300 $μ$m were fabricated. Through dual incorporation of HepG2 cells and nanosensors within these alginate constructs we aim to have a real-time, non-invasive method to measure microenvironmental pH and O2 content. Ratiometric fluorescent output from the microenvironment is used to monitor O2 concentrations and pH during cell culture. Measurements show that 3D micro-scaled constructs are suitable for cell growth and proliferation. Moreover O2 and pH values within the hydrogel cellularised microspheres are shown to have physiological values that enable the maintenance of the hepatic phenotype

}, keywords = {Bioengineering}, author = {Tirella, A and Carroll, L. A. and Aylott, J and A. Ahluwalia} } @conference {1800, title = {{Monitoring microconstructs: cell and nanosensor encapsulation in alginate micro-beads}}, booktitle = {TERMIS 3rd World Congress}, year = {2012}, address = {Vienna, Austria}, abstract = {

Monitoring and controlling the microenvironment of cell cultures is an ongoing challenge for many researchers. Much research has been conducted characterising individual aspects such as 3D architecture, mechanical properties, biochemicals, etc. The biggest deficits in existing models for monitoring analytes within the cellular environment is the lack of appropriate means for non invasive, real-time and integrated monitoring of the cellular responses. Nanosensors can overcome these issues: they are porous polymeric nanoparticles that are sensitive to a range of analytes including pH and O2. Microfabrication techniques are innovative tools to obtain controlled microstructures with a defined 3D architecture. In this work uniform sized 3D micro-scaled hydrogel constructs of approximately 300-400 um diameter were fabricated. Through dual incorporation of cells and nanosensors within these constructs we aim to have a real-time, non invasive method to measure microenvironmental pH value and O2 content. Ratiometric fluorescent output from the microenvironment is used to monitor O2 and pH during cell culture. Measurements show that 3D micro-scaled constructs are suitable for cell growth and proliferation. Moreover O2 content and pH within hydrogel cellularised microspheres are shown to have physiological values which enable the maintenance of the hepatic phenotype.

}, keywords = {Bioengineering, Nanotools}, author = {Tirella, A and A. Ahluwalia and Aylott, J and Carroll, L. A.} } @conference {1803, title = {A multi-stimuli environment for cardiac tissue engineering}, booktitle = {TERMIS 3rd World Congress}, year = {2012}, address = {Vienna, Austria}, abstract = {

The identification of the ideal cell source to generate cardiac tissue able to integrate into the host myocardium and with the contractile system is crucial for cardiac engineering. Amongst different cell sources so far proposed, human adult Cardiac Progenitor Cells (hCPCs) show the ability to proliferate and differentiate toward cardiac lineages when grown in appropriate microenvironmental conditions. It is widely accepted that conventional 2D cultures may provide a physiological environment for growing cells. For this reason the need to have an engineered microenvironment, matching physiological requirements, is crucial. A 3D context with spatial and time varying distribution of regulatory factors using mechanically matched scaffolds and bioreactors could represent an in vitro cell culture model being able to more closely reflects the in vivo conditions. In the present study, the possibility of using biocompatible and biodegradable scaffolds of collagen based or derivatives hydrogels in combination with Linneg/Sca-1pos hCPCs gathered from human heart biopsies was investigated. Bio-constructs were placed in the low shear, high flow MCmB (MultiCompartment modular Bioreactor) and the combined effects of dynamic culture conditions and 3D scaffolds on cell morphology and differentiation were studied in order to investigate the possibility of fabricating stem cell-derived cardiac patches to replace infarcted tissue.

}, keywords = {Bioengineering, Bioreactors, Dynamic 3D Cultures}, author = {Tirella, A and A. Ahluwalia and P. Di Nardo and Gaudiello, E and S. Giusti and F. Pagliari} } @conference {1797, title = {New method for the viscoelastic analysis of soft and highly hydrated biomaterials}, booktitle = {National Conference of Bioengineering}, year = {2012}, address = {Rome, Italy}, abstract = {

The role of materials mechanical properties is a new frontier for the evaluation of cell/material interaction, as well as for the determination of healthy/pathological state of a tissue. In these sense there is the need to have a unique method to measure materials viscoelastic properties. However, concerning with soft and highly hydrated constructs, the experimental set-up to precisely measure these properties is challenging because of the difficulty in defining zero stress or strain. To overcome these problems, we propose a novel and unique testing and data analysis technique (ERM) to derive materials viscoelastic properties. Results derived with this method can be compared to the ones obtained with standard testing techniques for viscoelastic materials. Pre-conditioning problems of testing soft and floppy materials are thus overcome, giving rise to have an accurate measure of viscous and elastic moduli of both hydrated materials and soft biological tissues. Small variations of measured properties can be also monitored with high precision, allowing a deeper investigation on the role of the scaffolding material or of tissue{\^a}{\texteuro}{\texttrademark}s extracellular matrix (respectively in cell culture systems or in biomechanics measurements for the characterisation of soft tissues).

}, keywords = {Bioengineering}, author = {Tirella, A and G. Mattei and A. Ahluwalia} } @article {1331, title = {The PAM2 system: a multilevel approach for fabrication of complex three-dimensional microstructures}, journal = {Rapid Prototyping Journal}, volume = {18}, year = {2012}, pages = {299{\textendash}307}, keywords = {Bioengineering}, doi = {10.1108/13552541211231725}, author = {Tirella, A and C. De Maria and G. Criscenti and G. Vozzi and A. Ahluwalia} } @conference {2005, title = {Personal Biomonitoring System: a real-time physiological and behavioural parameter monitoring system for stress correlation}, booktitle = {17th Annual CyberPsychology \& CyberTherapy Conference (CYBER17)}, year = {2012}, month = {September 25-28,}, pages = {{\textendash}}, author = {N. Carbonaro and A. Tognetti and G. Anania and Dalle Mura, G. and D. De Rossi} } @article {1333, title = {Rapid Prototyping Composite and Complex Scaffolds with PAM2}, journal = {Methods in Molecular Biology}, volume = {868}, year = {2012}, pages = {57{\textendash}69}, keywords = {Bioengineering}, author = {G. Vozzi and Tirella, A and A. Ahluwalia} } @article {1334, title = {Realization of a poro-elastic ultrasound replica of pulmonary tissue}, journal = {Biomatter}, volume = {2}, year = {2012}, pages = {27{\textendash}26}, keywords = {Bioengineering}, url = {http://www.landesbioscience.com/journals/biomatter/article/19835/}, author = {Spinelli, A and Vinci, B. and Tirella, A and Matteucci, M and Gargani, L and A. Ahluwalia and C. Domenici and Picano, E and Chiarelli, P} } @conference {2283, title = {Replicating the 3D cardiomyocyte environment in the squeeze pressure bioreactor}, booktitle = {Journal of tissue engineering and regenerative medicine}, volume = {6 Suppl 1}, year = {2012}, pages = {341}, keywords = {Bioengineering}, doi = {10.1002/term.1586}, url = {http://www.ncbi.nlm.nih.gov/pubmed/22941753}, author = {S. Giusti and Tirella, A and Galli, E and Vozzi, F. and Cabiati, M and A. Ahluwalia} } @conference {1792, title = {Replicating the cardiac environment in the Squeeze Pressure Bioreactor}, booktitle = {TERMIS 3rd World Congress}, year = {2012}, keywords = {Bioengineering}, author = {S. Giusti and Tirella, A and Galli, E and Vozzi, F. and Cabiati, M and A. Ahluwalia} } @article {1327, title = {Riboflavin and collagen: New crosslinking methods to tailor the stiffness of hydrogels}, journal = {Materials Letters}, volume = {74}, year = {2012}, pages = {58{\textendash}61}, abstract = {

Fabricating materials with tailored mechanical properties is a challenge and crucial for their successful application in a variety of fields such as tissue engineering. Here collagen and riboflavin were used to create hydrogels with controlled mechanical properties mimicking those of soft tissues (e.g. liver). Collagen-based hydrogels were obtained using a two-step gelation method. Firstly a physical gelation step (i.e. modulation of temperature and pH) was used to fix a specific shape; then photo-initiated cross-links were formed to increase the stiffness. Specifically the chemical cross-linking step was initiated with UV (ultra-violet) radiation to obtain riboflavin derivatised radical polymerization of collagen chains. Cylindrical shaped samples with controlled dimensions were fabricated, and then tested using compressive loading. We show that the compressive elastic modulus of collagen-based hydrogels can be tuned between 0.9 and 3.6 kPa by changing collagen concentration, irradiation with UV in the presence of riboflavin and freeze-drying.

}, keywords = {Bioengineering}, issn = {0167577X}, doi = {10.1016/j.matlet.2012.01.036}, url = {http://dx.doi.org/10.1016/j.matlet.2012.01.036}, author = {Tirella, A and Liberto, T and A. Ahluwalia} } @conference {1238, title = {Tele-Impedance: Exploring the Role of Common-Mode and Configuration-Dependant Stiffness}, booktitle = {IEEE-RAS International Conference on Humanoid Robots}, year = {2012}, pages = {363-369}, address = {Osaka, Japan}, keywords = {Robotics}, author = {A. Ajoudani and M Gabiccini and N G Tsagarakis and A Albu-Schaeffer and A. Bicchi} } @article {ATB12, title = {Tele-impedance: Teleoperation with Impedance Regulation Using a Body-Machine Interface}, journal = {International Journal of Robotics Research}, volume = { 31 }, year = {2012}, month = {11/2012}, pages = {1643 - 1656}, chapter = {1643}, keywords = {Robotics}, author = {A. Ajoudani and N G Tsagarakis and A. Bicchi} } @conference {ATB12, title = {Tele-Impedance: Towards Transferring Human Impedance Regulation Skills to Robots}, booktitle = {International Conference of Robotics and Automation - ICRA 2012}, year = {2012}, month = {May 14 - 18}, pages = {382 - 388 }, address = {Saint Paul, MN, USA}, keywords = {Robotics}, author = {A. Ajoudani and N G Tsagarakis and A. Bicchi} } @conference {2006, title = {Unobtrusive Physiological and Gesture Wearable Acquisition System: A Preliminary Study on Behavioral and Emotional Correlations}, booktitle = {GLOBAL HEALTH 2012 : The First International Conference on Global Health Challenges}, year = {2012}, month = {21-26 October}, pages = {88{\textendash}92}, author = {N. Carbonaro and A. Greco and G. Anania and G. Dalle Mura and A. Tognetti and E. P. Scilingo and D. De Rossi and A Lanata} } @conference {BSTCB12, title = {On the Use of Postural Synergies to Improve Human Hand Pose Reconstruction}, booktitle = {Haptics Symposium}, year = {2012}, month = {March 4 - 7}, pages = {91 - 98}, address = {Vancouver, Canada}, keywords = {Haptics, Robotics}, author = {M. Bianchi and P Salaris and A. Turco and N. Carbonaro and A. Bicchi} } @article {2001, title = {Validation of Smart Garments for Physiological and Activity-Related Monitoring of Humans in Harsh Environment}, journal = {AMERICAN JOURNAL OF BIOMEDICAL ENGINEERING}, volume = {2}, year = {2012}, pages = {189{\textendash}196}, issn = {2163-1050}, doi = {10.5923/j.ajbe.20120204.07}, url = {http://dx.medra.org/10.5923/j.ajbe.20120204.07}, author = {Secco, E. L. and Curone, D. and A. Tognetti and Bonfiglio, A. and G. Magenes} } @conference {CGGBDBTB12, title = {A Variable Damping module for Variable Impedance Actuation}, booktitle = {International Conference of Robotics and Automation - ICRA 2012}, year = {2012}, month = {May 14 - 18}, pages = {2666 - 2672}, address = {Saint Paul, MN, USA}, keywords = {Robotics}, author = {M. G. Catalano and G. Grioli and M. Garabini and F. A. W. Belo and A. Di Basco and N G Tsagarakis and A. Bicchi} } @article {1245, title = {Variable Impedance Actuators: Moving the Robots of Tomorrow}, year = {2012}, keywords = {Robotics}, author = {B. Vanderborght and A Albu-Schaeffer and A. Bicchi and E. Burdet and D. G. Caldwell and R. Carloni and M. G. Catalano and G. Ganesh and M. Garabini and G. Grioli and S. Haddadin and A. Jafari and M. Laffranchi and D. Lefeber and F. Petit and S. Stramigioli and N G Tsagarakis and M. Van Damme and R. Van Ham and L. C. Visser and S. Wolf} } @conference {1243, title = { Velvet fingers: A dexterous gripper with active surfaces}, booktitle = {International Conference of Intelligent Robots and Systems - IROS 2012}, year = {2012}, month = {October 7 - 12}, pages = {1257 - 1263 }, address = {Vilamoura, Algarve, Portugal}, keywords = {Robotics}, author = {V. Tincani and M. G. Catalano and E. Farnioli and M. Garabini and G. Grioli and G Fantoni and A. Bicchi} } @conference {2004, title = {Wearable systems for e-health: Telemonitoring and telerehabilitation}, booktitle = {Proceedings of the IASTED African Conference on Health Informatics, AfricaHI 2012}, year = {2012}, pages = {335{\textendash}338}, doi = {10.2316/P.2012.763-004}, url = {http://dx.medra.org/10.2316/P.2012.763-004}, author = {D. De Rossi and F. Lorussi and A. Tognetti} } @article {1291, title = {Autonomous underwater vehicle teams for adaptive ocean sampling: a data-driven approach}, journal = {OCEAN DYNAMICS}, volume = {61}, year = {2011}, pages = {{\textendash}}, keywords = {Embedded Control, Robotics}, issn = {1616-7341}, doi = {10.1007/s10236-011-0464-x}, url = {http://dx.medra.org/10.1007/s10236-011-0464-x}, author = {A. Munaf{\`o} and E. Simetti and A. Turetta and G. Casalino and A. Caiti} } @article {1514, title = {Cooperation of Biological and Mechanical Signals in Cardiac Progenitor Cell Differentiation}, journal = {ADVANCED MATERIALS}, year = {2011}, keywords = {Bioengineering}, issn = {0935-9648}, author = {S. Pagliari and A.C. Vilela-Silva and G. Forte and F. Pagliari and C. Mandoli and G. Vozzi and S. Pietronave and M. Prat and S. Licoccia and A. Ahluwalia and E. Traversa and M. Minieri and P. Di Nardo} } @conference {SGSTB11, title = {A decoupled Impedance observer for a Variable Stiffness Robot}, booktitle = {2011 IEEE International Conference on Robotics and Automation}, year = {2011}, month = {May 9 - 13}, pages = {5548 - 5553}, address = {Shangai, China}, keywords = {Robotics}, author = {A. Serio and G. Grioli and I. Sardellitti and N G Tsagarakis and A. Bicchi} } @conference {2012, title = {Electroactive polymer patches for wearable haptic interfaces}, booktitle = {Annual International Conference of the IEEE Engineering in Medicine and Biology Society EMBC{\textquoteright}11}, year = {2011}, pages = {8369{\textendash}8372}, doi = {10.1109/IEMBS.2011.6092064}, url = {http://dx.medra.org/10.1109/IEMBS.2011.6092064}, author = {D. De Rossi and F. Carpi and N. Carbonaro and A. Tognetti and E. P. Scilingo} } @conference {2014, title = {Enhancing the performance of upper limb gesture reconstruction through sensory fusion}, booktitle = {Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS}, year = {2011}, pages = {3496{\textendash}3499}, publisher = {IEEE}, organization = {IEEE}, address = {USA}, doi = {10.1109/IEMBS.2011.6090944}, url = {http://dx.medra.org/10.1109/IEMBS.2011.6090944}, author = {F. Lorussi and A. Tognetti and N. Carbonaro and G. Anania and D. De Rossi} } @conference {1799, title = {How dimension a substrate for the realisation of controlled micro- and bio-inspired environment}, booktitle = {Euromat-FEMS}, year = {2011}, address = {Montpellier, France}, abstract = {

European Congress and Exhibition on Advanced Materials and Processes - Oral

}, keywords = {Bioengineering}, author = {Tirella, A and A. Ahluwalia and C. De Maria and Vozzi, F. and G. Vozzi and Sandri, T and Sassano, D and Cognolato, L} } @inbook {1789, title = {{Inherently Bio-Active Scaffolds: Intelligent Constructs to Model the Stem Cell Niche}}, booktitle = {Myocardial Tissue Engineering}, series = {Studies in Mechanobiology, Tissue Engineering and Biomaterials}, volume = {6}, year = {2011}, pages = {29{\textendash}47}, publisher = {Springer Berlin Heidelberg}, organization = {Springer Berlin Heidelberg}, address = {Berlin, Heidelberg}, abstract = {

The oft-abused phrase {\^a}{\texteuro}{\oe}genes load the gun, environment pulls the trigger{\^a}{\texteuro} can be applied to stem cells and stem cell niches as well as to cell{\^a}{\texteuro}{\textquotedblleft}material interfaces. Much is known about cell{\^a}{\texteuro}{\textquotedblleft}material interaction in general, perhaps a little less about how these interactions condition cell phenotype. With the increasing interest in stem cells and, in particular, their applications in tissue regeneration, the regulation of the stem cell microenvironment through modulation of intuitive or smart materials and structures, or what we term IBAS (Inherently Bio-Active Scaffolds) is poised to become a major field of research. Here, we discuss how cardiac regeneration strategies have undergone a gradual shift from the emphasis on biochemical signals and basic biology to one in which the material or scaffold plays a major role in establishing an equilibrium state. From being a constant battle or tug-of-war between the cells and synthetic environments, we conceive IBAS as intuitively responding to the cell{\^a}{\texteuro}{\texttrademark}s requirements to instate a sort of equilibrium in the system.

}, keywords = {Bioengineering}, isbn = {978-3-642-18055-2}, doi = {10.1007/978-3-642-18056-9}, url = {http://www.springerlink.com/content/j3k541l113233424/}, author = {P. Di Nardo and M. Minieri and Tirella, A and G. Forte and A. Ahluwalia}, editor = {Boccaccini, A. R. and Harding, S. E.} } @conference {1805, title = {Modelling and realisation of smart graded hydrogel scaffolds}, booktitle = {Euromat-FEMS}, year = {2011}, address = {Montpellier, France}, abstract = {

European Congress and Exhibition on Advanced Materials and Processes - Poster F12-P-2-08

}, keywords = {Bioengineering}, author = {Tirella, A and G. Mattei and F. Montemurro and G. Vozzi and A. Ahluwalia} } @article {1490, title = {PAM2 (Piston Assisted Microsyringe): A New Rapid Prototyping Technique for Biofabrication of Cell Incorporated Scaffolds}, journal = {Tissue Eng Part C Methods}, volume = {17}, year = {2011}, keywords = {Bioengineering}, doi = {10.1089/ten.tec.2010.0195}, author = {Tirella, A and Vozzi, F. and G. Vozzi and A. Ahluwalia} } @article {1513, title = {Poly(ester urethane) Guides for Peripheral Nerve Regeneration}, journal = {MACROMOLECULAR BIOSCIENCE}, year = {2011}, keywords = {Bioengineering}, issn = {1616-5187}, author = {V. Chiono and Sartori, S and Rechichi, A and Tonda-Turo, C and G. Vozzi and Vozzi, F. and D{\textquoteright}Acunto, M and C. Salvadori and F. Dini and G. Barsotti and F. Carlucci and S. Burchielli and Nicolino, S and Audisio, C and Perroteau, I and P. Giusti and G. Ciardelli} } @article {1292, title = {RT2: Real Time Ray Tracing for Underwater range Evaluation}, journal = {INTELLIGENT SERVICE ROBOTICS}, volume = {4}, year = {2011}, keywords = {Robotics}, issn = {1861-2776}, doi = {10.1007/s11370-011-0093-8}, url = {http://dx.medra.org/10.1007/s11370-011-0093-8}, author = {G. Casalino and A. Caiti and E. Simetti and A. Turetta} } @article {2007, title = {SoC CMOS UWB Pulse Radar Sensor for Contactless Respiratory Rate Monitoring}, journal = {IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS}, volume = {5}, year = {2011}, pages = {503{\textendash}510}, issn = {1932-4545}, doi = {10.1109/TBCAS.2011.2176937}, url = {http://dx.medra.org/10.1109/TBCAS.2011.2176937}, author = {D. Zito and D. Pepe and M. Mincica and F. Zito and A. Tognetti and A Lanata and D. De Rossi} } @article {1488, title = {Substrate stiffness influences high resolution printing of living cells with an ink-jet system}, journal = {Journal of bioscience and bioengineering}, volume = {112}, year = {2011}, pages = {79{\textendash}85}, abstract = {

The adaptation of inkjet printing technology for the realisation of controlled micro- and nano-scaled biological structures is of great potential in tissue and biomaterial engineering. In this paper we present the Olivetti BioJet system and its applications in tissue engineering and cell printing. BioJet, which employs a thermal inkjet cartridge, was used to print biomolecules and living cells. It is well known that high stresses and forces are developed during the inkjet printing process. When printing living particles (i.e., cell suspensions) the mechanical loading profile can dramatically damage the processed cells. Therefore computational models were developed to predict the velocity profile and the mechanical load acting on a droplet during the printing process. The model was used to investigate the role of the stiffness of the deposition substrate during droplet impact and compared with experimental investigations on cell viability after printing on different materials. The computational model and the experimental results confirm that impact forces are highly dependent on the deposition substrate and that soft and viscous surfaces can reduce the forces acting on the droplet, preventing cell damage. These results have high relevance for cell bioprinting; substrates should be designed to have a good compromise between substrate stiffness to conserve spatial patterning without droplet coalescence but soft enough to absorb the kinetic energy of droplets in order to maintain cell viability.

}, keywords = {Bioengineering}, issn = {1347-4421}, doi = {10.1016/j.jbiosc.2011.03.019}, url = {http://www.ncbi.nlm.nih.gov/pubmed/21497548}, author = {Tirella, A and Vozzi, F. and C. De Maria and G. Vozzi and Sandri, T and Sassano, D and Cognolato, L and A. Ahluwalia} } @conference {ATB11, title = {Tele-Impedance: Preliminary Results on Measuring and Replicating Human Arm Impedance in Tele Operated Robots}, booktitle = {IEEE International Conference on Robotics and Biomimetics - ROBIO 2011}, year = {2011}, note = {

Accepted, youtube: http://www.youtube.com/watch?v=KPO6IO7Tr-Q

}, month = {December 7 - 11}, pages = {216 - 223}, address = {Phuket, Thailand}, keywords = {Robotics}, author = {A. Ajoudani and N G Tsagarakis and A. Bicchi} } @conference {CGGBB11, title = {VSA - CubeBot. A modular variable stiffness platform for multi degrees of freedom systems}, booktitle = {2011 IEEE International Conference on Robotics and Automation}, year = {2011}, month = {May 9 - 13}, pages = {5090 - 5095}, address = {Shangai, China}, keywords = {Robotics}, author = {M. G. Catalano and G. Grioli and M. Garabini and F. Bonomo and M. Mancini and N G Tsagarakis and A. Bicchi} } @conference {2013, title = {Wearable biomonitoring system for stress management: A preliminary study on robust ECG signal processing}, booktitle = {2011 IEEE International Symposium on a World of Wireless, Mobile and Multimedia Networks, WoWMoM 2011}, year = {2011}, month = {20-24 June}, pages = {{\textendash}}, doi = {10.1109/WoWMoM.2011.5986192}, url = {http://dx.medra.org/10.1109/WoWMoM.2011.5986192}, author = {N. Carbonaro and G. Anania and G. Dalle Mura and M. Tesconi and A. Tognetti and G. Zupone and D. De Rossi} } @book {2011, title = {Wearable Kinaesthetic Systems for Capturing Body Posture and Gesture}, year = {2011}, publisher = {VDM Verlag Dr. M?ller}, organization = {VDM Verlag Dr. M?ller}, isbn = {3639333276}, author = {A. Tognetti} } @inbook {2009, title = {Wearable Monitoring Systems}, year = {2011}, pages = {205{\textendash}219}, publisher = {Springer US}, organization = {Springer US}, chapter = {Emergency and work}, isbn = {9781441973832}, doi = {10.1007/978-1-4419-7384-9_10}, url = {http://dx.medra.org/10.1007/978-1-4419-7384-9_10}, author = {Bonfiglio, A. and Curone, D. and Secco, E. and G. Magenes and A. Tognetti} } @inbook {2010, title = {Wearable Monitoring Systems}, year = {2011}, pages = {3{\textendash}25}, chapter = {Sensors for Wearable Systems}, isbn = {9781441973832}, doi = {10.1007/978-1-4419-7384-9_1}, url = {http://dx.medra.org/10.1007/978-1-4419-7384-9_1}, author = {E. P. Scilingo and A Lanata and A. Tognetti} } @article {2008, title = {Wearable Systems for Brain body Reading and Mind Healing}, journal = {CYBER THERAPY AND REHABILITATION MAGAZINE}, year = {2011}, pages = {39{\textendash}40}, issn = {1784-9926}, author = {A. Tognetti and E. P. Scilingo and G. Anania and N. Carbonaro and A Lanata and F. Lorussi and D. Mazzei and G. Valenza and D. De Rossi} } @conference {2023, title = {Enabling technology for heart health wireless assistance}, booktitle = {12th IEEE International conference on e-Health networking, application and services}, year = {2010}, month = {1-3 July}, pages = {36{\textendash}42}, doi = {10.1109/HEALTH.2010.5556540}, url = {http://dx.medra.org/10.1109/HEALTH.2010.5556540}, author = {M. Mincica and D. Pepe and A. Tognetti and A Lanata and D. De Rossi and D. Zito} } @conference {1532, title = {Enzymatic cross-linked hydrogel: role of Lysyl oxidase as an initiator of fibroblast inflammatory response}, booktitle = {Congresso Nazionale di Bioingegneria 2010}, year = {2010}, keywords = {Bioengineering}, author = {Tirella, A and G. Vozzi and N. Tirelli and A. Ahluwalia} } @article {1332, title = {Finite element modelling and design of a concentration gradient generating bioreactor: Application to biological pattern formation and toxicology}, journal = {Toxicology in vitro}, volume = {24}, year = {2010}, pages = {1828{\textendash}1837}, abstract = {

This paper describes the use of a microfluidic gradient maker for the toxicological analysis of some conventional biomolecules such as hydrogen peroxide and a local anaesthetic, lidocaine on different cell cultures, human endothelial cells and myoblasts, respectively. The microfluidic device was designed and simulated using COMSOL Multiphysics(R) and the concentration gradient in the microfluidic network was analysed through a fluid-dynamic and mass-transport study. Subsequently the device was fabricated with soft lithography, casting PDMS in a master to obtain channels about 250mum deep. Hydrogen peroxide was tested on human endothelial cells, while lidocaine was tested on C2C12 myoblasts and an analysis was performed using propidium iodide staining followed by an imaging processing routine to obtain quantitative dose-response profiles in the gradient maker. The results show that the Gradient Maker (GM) bioreactor is a more sensitive method for detection of cell toxicity, and compared with testing of drug toxicity using microwells with individual cell cultures, allows one shot testing with a single cell culture exposed to a large number of concentrations. Moreover, the Gradient Maker was also modelled in order to realise biological pattern formation using two morphogenes acting as activator and inhibitor with varying diffusion rates.

}, keywords = {Bioengineering}, issn = {1879-3177}, doi = {10.1016/j.tiv.2010.05.010}, url = {http://www.ncbi.nlm.nih.gov/pubmed/20580814}, author = {G. Vozzi and D. Mazzei and Tirella, A and Vozzi, F. and A. Ahluwalia} } @article {2015, title = {Heart Rate and Accelerometer data fusion for activity assessment of rescuers during emergency interventions}, journal = {IEEE TRANSACTIONS ON INFORMATION TECHNOLOGY IN BIOMEDICINE}, volume = {14}, year = {2010}, pages = {702{\textendash}710}, issn = {1089-7771}, doi = {10.1109/TITB.2010.2047727}, url = {http://dx.medra.org/10.1109/TITB.2010.2047727}, author = {Curone, D. and A. Tognetti and Secco, E. L. and G. Anania and N. Carbonaro and D. De Rossi and G. Magenes} } @article {1294, title = {The hybrid glider/auv FOLAGA}, journal = {IEEE ROBOTICS AND AUTOMATION MAGAZINE}, volume = {1}, year = {2010}, pages = {31{\textendash}44}, keywords = {Robotics}, issn = {1070-9932}, doi = {10.1109/MRA.2010.935791}, url = {http://dx.medra.org/10.1109/MRA.2010.935791}, author = {A. Caffaz and A. Caiti and G. Casalino and A. Turetta} } @conference {1527, title = {Hydrogel Bioactive Scaffold Fabricated with PAM2 System: Realization of Complex Shaped Scaffold with a Homogeneous Dispersion of HepG2 cells}, booktitle = {NIP Conference}, year = {2010}, keywords = {Bioengineering}, author = {Tirella, A and Vozzi, F. and G. Vozzi and A. Ahluwalia} } @conference {2019, title = {The influence of audio-stimuli on isochronic repetitive movements. A time analysis using kinematic data}, booktitle = {Joint Meeting of Young Italian and Japanese Neuroscientists, Italian Society for Neuroscience}, year = {2010}, month = {21 settembre}, pages = {35{\textendash}35}, author = {Del Tongo, C. and Bravi, R. and A. Tognetti and Dalle Mura, G. and Minciacchi, D.} } @conference {2024, title = {Interreality: The use of advanced technologies in the assessment and treatement of psychological stress}, booktitle = {Proceedings of the 2010 10th International Conference on Intelligent Systems Design and Applications ISDA{\textquoteright}10}, year = {2010}, month = {29 Nov- 1 Dec}, pages = {1047{\textendash}1051}, doi = {10.1109/ISDA.2010.5687047}, url = {http://dx.medra.org/10.1109/ISDA.2010.5687047}, author = {G. Pioggia and N. Carbonaro and G. Anania and A. Tognetti and Tartarisco, G. and M. Ferro and D. De Rossi and G. Riva} } @article {1756, title = {Mechanism of Motor reduction with variable rigidity and rapidly controllable}, year = {2010}, address = {USA}, keywords = {Robotics}, issn = {US7699731}, author = {A. Bicchi and G. Tonietti} } @conference {2021, title = {A MR Compatible Sensing Glove for Brain Studies}, booktitle = {Proceedings of the 16th Annual Meeting of the Organization for Human Brain Mapping}, year = {2010}, month = {6-10 Giugno}, pages = {1262 MT{\textendash}PM{\textendash}}, author = {N. Vanello and V. Hartwig and M. Tesconi and E. Ricciardi and G. Zupone and A. Tognetti and D. Bonino and E. P. Scilingo and F. Cutolo and G. Giovannetti and P. Pietrini and D. De Rossi and L. Landini} } @conference {2022, title = {Neural Correlates of Human-Robot Handshaking}, booktitle = {Proc. of the 19th IEEE International Symposium in Robot and Human Interactive Communication}, year = {2010}, note = {

http://www.scopus.com/inward/record.url?eid=2-s2.0-78649822141\&partnerID=40\&md5=e485b7dd908e69afd535dc7792a8e5b3

}, month = {13-15, Settembre}, pages = {555{\textendash}561}, publisher = {IEEE}, organization = {IEEE}, address = {NEW YORK {\textendash} USA}, doi = {10.1109/ROMAN.2010.5598624}, url = {http://dx.medra.org/10.1109/ROMAN.2010.5598624}, author = {N. Vanello and D. Bonino and E. Ricciardi and M. Tesconi and E. P. Scilingo and V. Hartwig and A. Tognetti and G. Zupone and F. Cutolo and G. Giovannetti and P. Pietrini and D. De Rossi and L. Landini} } @conference {1531, title = {PAM2 microfabricated three-dimensional bioactive hydrogel systems: realisation of a hepatic-like structure}, booktitle = {Congresso Nazionale di Bioingegneria 2010}, year = {2010}, keywords = {Bioengineering}, author = {Tirella, A and Vozzi, F. and Vinci, B. and G. Vozzi and A. Ahluwalia} } @conference {1525, title = {PAM2 System: a Modular Approach for the Realisation of Complex Shaped Scaffold Able to Reproduce the Main Features of a Specific Micro-environment,}, booktitle = {2010 International Conference on Biofabrication, 4-6 October 2010, Philadelphia, USA}, year = {2010}, keywords = {Bioengineering}, author = {A. Ahluwalia and Tirella, A and G. Vozzi} } @conference {1464, title = {A pervasive activity management and rehabilitation support system for the elderly}, booktitle = {Pervasive Computing and Communications Workshops (PERCOM Workshops), 2010 8th IEEE International Conference on}, year = {2010}, pages = {813{\textendash}816}, publisher = {IEEE}, organization = {IEEE}, keywords = {Bioengineering}, author = {G. Pioggia and Tartarisco, G. and G. Valenza and Ricci, G. and Volpi, L. and Siciliano, G. and Bonfiglio, S.} } @inbook {2018, title = {Pervasive Computing: Innovations in Intelligent Multimedia and Applications}, year = {2010}, pages = {97{\textendash}115}, publisher = {Springer London}, organization = {Springer London}, chapter = {Sensorized garment augmented 3d pervasive virtual reality system}, isbn = {9781848825987}, doi = {10.1007/978-1-84882-599-4_5}, url = {http://dx.medra.org/10.1007/978-1-84882-599-4_5}, author = {Gulrez, T and A. Tognetti and D. De Rossi} } @inbook {1522, title = {Rapid Prototyping Composite and Complex Scaffolds with PAM2}, booktitle = {Computer-Aided Tissue Engineering}, volume = {868}, number = {Methods in Molecular Biology}, year = {2010}, pages = {57-69}, chapter = {Rapid Prototyping Composite and Complex Scaffolds with PAM2}, keywords = {Bioengineering}, author = {G. Vozzi and Tirella, A and A. Ahluwalia} } @conference {1526, title = {Site Specific Nano-Tuning of Scaffolds Using Inkjet Printing}, booktitle = {NIP Conference}, year = {2010}, address = {Austin, Texas }, keywords = {Bioengineering}, author = {Tirella, A and F. Montemurro and Vinci, B. and Vozzi, F. and G. Vozzi and Sassano, D and Sandri, T and Cognolato, L and A. Ahluwalia} } @article {2017, title = {Smart Garments for Emergency Operators: The ProeTEX Project}, journal = {IEEE TRANSACTIONS ON INFORMATION TECHNOLOGY IN BIOMEDICINE}, volume = {14}, year = {2010}, pages = {694{\textendash}701}, issn = {1089-7771}, doi = {10.1109/TITB.2010.2045003}, url = {http://dx.medra.org/10.1109/TITB.2010.2045003}, author = {Curone, D. and Secco, E. L. and A. Tognetti and G. Loriga and Dudnik, G. and Risatti, M. and Whyte, R. and Bonfiglio, A. and G. Magenes} } @conference {2025, title = {Wearable monitoring of lumbar spine curvature by inertial and e-textile sensory fusion}, booktitle = {2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC{\textquoteright}10}, year = {2010}, pages = {6373{\textendash}6376}, publisher = {IEEE}, organization = {IEEE}, address = {USA}, doi = {10.1109/IEMBS.2010.5627294}, url = {http://dx.medra.org/10.1109/IEMBS.2010.5627294}, author = {R. Bartalesi and F. Lorussi and D. De Rossi and M. Tesconi and A. Tognetti} } @article {2016, title = {A WEARABLE SYSTEM FOR MONITORING GESTURE, POSTURE AND PHYSIOLOGICAL CORRELATES OF EMOTION}, journal = {PARKINSONISM \& RELATED DISORDERS}, year = {2010}, pages = {{\textendash}}, issn = {1353-8020}, author = {Debarnot, U. and F. Lorussi and E. P. Scilingo and A. Tognetti and D. De Rossi} } @conference {FontanelliPP09, title = {Convergence of Distributed WSN Algorithms: The Wake-Up Scattering Problem}, booktitle = {Proc. of Hybrid Systems: Computation and Control}, year = {2009}, month = {April 13{\textendash}15}, pages = {180{\textendash}193}, publisher = {Springer-Verlag Berlin Heidelberg}, organization = {Springer-Verlag Berlin Heidelberg}, address = {San Francisco}, keywords = {Robotics}, author = {D. Fontanelli and L. Palopoli and R. Passerone}, editor = {R. Majumdar and P. Tabuada} } @conference {1856, title = {Cooperating AUV Teams: Adaptive Area Coverage With Space-Varying Communication Constraints}, booktitle = {IEEE Oceans Europe 09}, year = {2009}, month = {May}, pages = {{\textendash}}, keywords = {Robotics}, doi = {10.1109/OCEANSE.2009.5278255}, url = {http://dx.medra.org/10.1109/OCEANSE.2009.5278255}, author = {A. Caiti and G. Casalino and A. Munaf{\`o} and A. Turetta} } @conference {2029, title = {Event Related Biometrics: Towards an Unobtrusive Sensing Seat System for Continuous Human Authentication}, booktitle = {Proceedings of the ISDA 2009 - 9th International Conference on Intelligent Systems Design and Applications}, year = {2009}, pages = {679{\textendash}682}, doi = {10.1109/ISDA.2009.256}, url = {http://dx.medra.org/10.1109/ISDA.2009.256}, author = {M. Ferro and G. Pioggia and A. Tognetti and Dalle Mura, G. and D. De Rossi} } @article {1300, title = {Folaga: a low cost autonomous underwater vehicle combining glider and auv capabilities}, journal = {OCEAN ENGINEERING}, volume = {36}, year = {2009}, pages = {24{\textendash}38}, keywords = {Robotics}, issn = {0029-8018}, doi = {10.1016/j.oceaneng.2008.08.014}, url = {http://dx.medra.org/10.1016/j.oceaneng.2008.08.014}, author = {A. Alvarez and A. Caffaz and A. Caiti and G. Casalino and L. Gualdesi and A. Turetta and R. Viviani} } @article {1296, title = {F{\`o}laga: A low cost AUV/glider for coastal environmental sampling}, journal = {UNDERWATER TECHNOLOGY}, volume = {28}, year = {2009}, pages = {151{\textendash}157}, keywords = {Robotics}, issn = {1756-0543}, doi = {10.3723/ut.28.151}, url = {http://dx.medra.org/10.3723/ut.28.151}, author = {A. Caffaz and A. Caiti and G. Casalino and L. Gualdesi and A. Turetta} } @article {1539, title = {Melt-extruded guides for peripheral nerve regeneration. Part I: Poly(epsilon-caprolactone)}, journal = {BIOMEDICAL MICRODEVICES}, year = {2009}, pages = {1037-1050}, keywords = {Bioengineering}, issn = {1387-2176}, author = {V. Chiono and G. Vozzi and Vozzi, F. and C. Salvadori and F. Dini and F. Carlucci and ARISPICI, M and S. Burchielli and DI SCIPIO, F and GEUNA, S and FORNARO, M and TOS, P and Nicolino, S and Audisio, C and Perroteau, I and CHIARAVALLOTI, A and C. Domenici and P. Giusti and G. Ciardelli} } @conference {2028, title = {Music and non-musical timed information affect accuracy of motor performance in a task of synchronization}, booktitle = {Proceedings of the National Congress of the Italian Society for Neuroscience}, year = {2009}, pages = {{\textendash}}, author = {Del Tongo, C. and Bravi, R. and A. Tognetti and Dalle Mura, G. and Minciacchi, D.} } @conference {2027, title = {ntegrating hands-free interface into 3d virtual reality environments}, booktitle = {ARO Non-Manual Control Devices Symposium}, year = {2009}, pages = {{\textendash}}, author = {A. Tognetti and Gulrez, T and N. Carbonaro and G. Dalle Mura and G. Zupone and D. De Rossi} } @article {1328, title = {A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds}, journal = {Biofabrication}, volume = {1}, year = {2009}, pages = {045002}, abstract = {

Hydrogels are considered as excellent candidates for tissue substitutes by virtue of their high water content and biphasic nature. However, the fact that they are soft, wet and floppy renders them difficult to process and use as custom-designed scaffolds. To address this problem alginate hydrogels were modeled and characterized by measuring stress-strain and creep behavior as well as viscosity as a function of sodium alginate concentration, cross-linking time and calcium ion concentration. The gels were then microfabricated into scaffolds using the pressure-assisted microsyringe. The mechanical and viscous characteristics were used to generate a processing window in the form of a phase diagram which describes the fidelity of the scaffolds as a function of the material and machine parameters. The approach can be applied to a variety of microfabrication methods and biomaterials in order to design well-controlled custom scaffolds.

}, keywords = {Bioengineering}, issn = {1758-5090}, doi = {10.1088/1758-5082/1/4/045002}, url = {http://www.ncbi.nlm.nih.gov/pubmed/20811111}, author = {Tirella, A and Orsini, A and G. Vozzi and A. Ahluwalia} } @conference {1795, title = {Pneumatic module of PAM2 microfabrication system: realization of bio-inspired complex scaffolds}, booktitle = {3B International Conference in Bioprinting and Biofabrication}, year = {2009}, address = {Bordeaux, France}, abstract = {

poster

}, keywords = {Bioengineering}, author = {C. De Maria and Tirella, A and A. Ahluwalia and G. Vozzi} } @article {1540, title = {Polyurethane unimorph bender microfabricated with Pressure Assisted Microsyringe (PAM) for biomedical applications}, journal = {MATERIALS SCIENCE AND ENGINEERING. C}, volume = {29}, year = {2009}, pages = {1835{\textendash}1841}, keywords = {Bioengineering}, issn = {0928-4931}, author = {Tartarisco, G. and G. GALLONE and F. Carpi and G. Vozzi} } @article {2026, title = {A SENSING SEAT FOR HUMAN AUTHENTICATION}, journal = {IEEE TRANSACTIONS ON INFORMATION FORENSICS AND SECURITY}, volume = {4}, year = {2009}, pages = {451{\textendash}459}, issn = {1556-6013}, author = {M. Ferro and G. Pioggia and A. Tognetti and N. Carbonaro and D. De Rossi} } @conference {2031, title = {A sensorized glove for hand rehabilitation}, booktitle = {Proceedings of the Annual Northeast Bioengineering Conference}, year = {2009}, month = {3-5 April}, pages = {139{\textendash}140}, doi = {10.1109/NEBC.2009.4967775}, url = {http://dx.medra.org/10.1109/NEBC.2009.4967775}, author = {F. Cutolo and C. Mancinelli and S. Patel and N. Carbonaro and M. Schmid and A. Tognetti and D. De Rossi and P. Bonato} } @conference {2030, title = {Wearable Kinesthetic Systems and Emerging Technologies in Actuation for Upperlimb Neurorehabilitation}, booktitle = {Proc. of the IEEE EMBC 2009}, year = {2009}, month = {02/09/ - 06/09/}, pages = {6830{\textendash}6833}, doi = {10.1109/IEMBS.2009.5334481}, url = {http://dx.medra.org/10.1109/IEMBS.2009.5334481}, author = {D. De Rossi and F. Carpi and F. Lorussi and E. P. Scilingo and A. Tognetti} } @conference {1642, title = {Biomimicry of PAM Microfabricated Hydrogel Scaffolds}, booktitle = {International Conference on Digital Printing Technologies Conference Proceedings}, year = {2008}, pages = {{\textendash}}, keywords = {Bioengineering}, author = {Tirella, A and G. Vozzi and A. Ahluwalia} } @conference {1649, title = {Composite polyurethane and carbon black bimorph bender microfabricated with pressure assisted microsyringe (PAM) for biomedical applications}, year = {2008}, keywords = {Bioengineering}, author = {Tartarisco, G. and G. GALLONE and F. Carpi and G. Vozzi} } @article {1549, title = {Criticality of the Biological and Physical Stimuli Array Inducing Resident Cardiac Stem Cell Determination}, journal = {STEM CELLS}, volume = {26}, year = {2008}, pages = {2093{\textendash}2103}, keywords = {Bioengineering}, issn = {1066-5099}, author = {G. Forte and CAROTENUTO, F and F. Pagliari and S. Pagliari and COSSA, P and FIACCAVENTO, R and A. Ahluwalia and G. Vozzi and Vinci, B. and SERAFINO, A and RINALDI, A and E. Traversa and CAROSELLA, L and M. Minieri and P. Di Nardo} } @conference {FTBD08, title = {Decentralized Deployment of Mobile Sensors for Optimal Connected Sensing Coverage}, booktitle = {Distributed Computing in Sensor Systems}, series = {Lecture Notes in Computer Science}, volume = {5067/2008}, year = {2008}, pages = {486 - 491}, publisher = {Springer Berlin / Heidelberg}, organization = {Springer Berlin / Heidelberg}, abstract = {

In this paper, we address the optimal connected sensing coverage problem, i.e., how mobile sensors with limited sensing capabilities can cooperatively adjust their locations so as to maximize the extension of the covered area while avoiding any internal "holes", areas that are not covered by any sensor. Our solution consists in a distributed motion algorithm that is based on an original extension of the Voronoi tessellation.

}, keywords = {Embedded Control, Robotics}, url = {http://dx.doi.org/10.1007/978-3-540-69170-9_34}, author = {A. Fagiolini and L. Tani and A. Bicchi and G. Dini} } @article {1630, title = {Electroactive Carbon Nanotube Actuators: Soft-Lithographic Fabrication and Electro-chemical Modelling}, journal = {MATERIALS SCIENCE AND ENGINEERING. C, BIOMIMETIC MATERIALS, SENSORS AND SYSTEMS}, year = {2008}, pages = {{\textendash}}, keywords = {Bioengineering}, issn = {0928-4931}, author = {A. Mazzoldi and M. Tesconi and A. Tognetti and W. Rocchia and G. Vozzi and G. Pioggia and A. Ahluwalia and D. De Rossi} } @conference {1640, title = {Microfabbricazione di scaffold in alginato con propriet{\`a}~ meccaniche modulabili}, booktitle = {Congresso Nazionale Biomateriali 2008}, year = {2008}, pages = {{\textendash}}, keywords = {Bioengineering}, author = {Orsini, A and Tirella, A and A. Ahluwalia and G. Vozzi} } @conference {1634, title = {Microfabrication of Hydrogels scaffolds including cells and mechanical characterization}, booktitle = {Congresso Nazionale di Bioingegneria 2008}, year = {2008}, pages = {367-368}, address = {Pisa, Italy}, keywords = {Bioengineering}, author = {Tirella, A and G. Vozzi} } @conference {1794, title = {Microfluidic Gradient Maker for Pattern Generation}, booktitle = {TERMIS-EU}, year = {2008}, pages = {879}, address = {Porto, Portugal}, abstract = {

poster

}, keywords = {Bioengineering}, author = {Tirella, A and D. Mazzei and G. Vozzi and A. Ahluwalia} } @article {1489, title = {A microfluidic gradient maker for toxicity testing of bupivacaine and lidocaine}, journal = {Toxicology in vitro}, volume = {22}, year = {2008}, pages = {1957{\textendash}64}, abstract = {

A great deal of effort is being dedicated to the development of new devices able to conduct effective in vitro toxicology analyses. This paper describes the use of a microfluidic gradient maker for the toxicological analysis of two conventional local anesthetics, bupivacaine and lidocaine on cell cultures. The microfluidic device was designed and simulated using COMSOL Multiphysics and the concentration gradient in the microfluidic network was analysed through a fluidodynamic and diffusive study. Subsequently the device was fabricated with soft lithography, casting PDMS in a master to obtain channels about 250 microm deep. Both drugs were tested on C2C12 myoblasts and an analysis was performed using propidium iodide staining followed by an imaging processing routine to obtain quantitative dose-response profiles in the gradient maker. The system was critically compared with microwell-based toxicity testing. The results show that the GM is a more sensitive method for detection of cell toxicity, and compared with testing of drug toxicity using microwells with individual cell cultures, allows one shot testing with a single cell culture exposed to a large number of concentrations. However, the flow rates required to obtain a suitable concentration range across the device may damage shear sensitive cells.

}, keywords = {Bioengineering}, issn = {0887-2333}, doi = {10.1016/j.tiv.2008.09.016}, url = {http://www.ncbi.nlm.nih.gov/pubmed/18940244}, author = {Tirella, A and Marano, M and Vozzi, F. and A. Ahluwalia} } @conference {1644, title = {Nerve guide for peripheral nerve re generation}, year = {2008}, keywords = {Bioengineering}, author = {Tonda-Turo, C and V. Chiono and GEUNA, S and Perroteau, I and G. Vozzi and G. Ciardelli} } @conference {MED08-HTB, title = {Neural network based robust adaptive control for a variable stiffness actuator}, booktitle = {Control and Automation, 16 th Mediterranean Conference on Control and Automation}, year = {2008}, pages = {1028 - 1034}, abstract = {

In this paper we present a robust adaptive controller based on a neural network (NN) for a variable stiffness actuator (VSA). The controller is able to independently set the mechanical stiffness and position at the joint shaft to guarantee robustness with respect to slowly time-varying and unmodeled friction coefficients affecting the dynamics of the actuator. The lumped uncertainties of the VSA including unmodeled dynamics are considered and approximated by a simple NN so that the controlled system is asymptotically stable, and remains effective while process conditions vary. To cope with the reconstruction error of the NN, a sliding mode like additional robust control term is introduced. The proofs for the uniformly ultimately bounded (UUB) and uniform asymptotic (UAS) stabilities for the closed-loop system are provided in detail via Lyapunov theory. Simulation and experimental results are reported in support of both validity and performance of the proposed approach.

}, keywords = {Embedded Control, Robotics}, author = {S. Huh and G. Tonietti and A. Bicchi} } @conference {1796, title = {PAM Composite Scaffold of PCL and Carbon NanoTubes for Bone Tissue Regeneration}, booktitle = {National Conference of Bioengineering}, year = {2008}, pages = {369}, address = {Pisa, Italy}, abstract = {

poster

}, keywords = {Bioengineering}, author = {Mattioli-Belmonte, M. and Fantauzzi, V and K KYRIAKIDOU and Tirella, A and A. Ahluwalia and G. Vozzi} } @conference {AMC08, title = {Physical Human-Robot Interaction: Dependability, Safety, and Performance}, booktitle = {Proc. 10th Intl. Workshop Advanced Motion Control}, year = {2008}, pages = {9-14}, abstract = {

In this paper we discuss the problem of achieving good performance in accuracy and promptness by a robot manipulator under the condition that safety is guaranteed throughout task execution. Intuitively, while a rigid and powerful structure of the arm would favor its performance, lightweight compliant structures are more suitable for safe operation. The quantitative analysis of the resulting design trade-off between safety and performance has a strong impact on how robot mechanisms and controllers should be designed for human-interactive applications. We discuss few different possible concepts for safely actuating joints, and focus on aspects related to the implementation of the mechanics and control of this new class of robots.

}, keywords = {Embedded Control, Physical Human-Robot Interaction (pHRI), Robotics}, author = {A. Bicchi and M. Bavaro and G. Boccadamo and D. De Carli and R. Filippini and G. Grioli and M. Piccigallo and A. Rosi and R. Schiavi and S. Sen and G. Tonietti} } @conference {1641, title = {Realizzazione di strutture micro fabbricate tramite tecnica di micro Laser Sintering per applicazione alla Tissue Engineering}, booktitle = {Congresso Nazionale Biomateriali 2008}, year = {2008}, pages = {{\textendash}}, keywords = {Bioengineering}, author = {G. Criscenti and Tirella, A and A. Ahluwalia and P. Giusti and G. Vozzi} } @article {VHTRTZGCSSGPSBPDRL08, title = {Sensing Glove for Brain Studies: Design and assessment of its Compatibility for fMRI with a Robust Test}, journal = {IEEE - ASME Transactions on Mechatronics}, volume = {13}, number = {3}, year = {2008}, pages = {345-354}, abstract = {

In this paper, we describe a biomimetic-fabric-based sensing glove that can be used tomonitor hand posture and gesture. Our device is made of a distributed sensor network of piezoresistive conductive elastomers integrated into an elastic fabric. This solution does not affect natural movement and hand gestures, and can be worn for a long time with no discomfort. The glove could be fruitfully employed in behavioral and functional studies with functional MRI (fMRI) during specific tactile or motor tasks. To assess MR compatibility of the system, a statistical test on phantoms is introduced. This test can also be used for testing the compatibility of mechatronic devices designed to produce different stimuli inside the MR environment. We propose a statistical test to evaluate changes in SNR and time-domain standard deviations between image sequences acquired under different experimental conditions. fMRI experiments on subjects wearing the glove are reported. The reproducibility of fMRIresults obtained with andwithout the glove was estimated. A good similarity between the activated regions was found in the two conditions.

}, keywords = {Haptics, Robotics}, author = {N. Vanello and V. Hartwig and M. Tesconi and E. Ricciardi and A. Tognetti and G. Zupone and R. Gassert and D. Chapuis and N. Sgambelluri and E. P. Scilingo and G. Giovannetti and V. Positano and M. F. Santarelli and A. Bicchi and P. Pietrini and D. De Rossi and L. Landini} } @conference {1657, title = {Cardiac and Mesenchymal Stem Cell Growth and Selective Differentiation on Three Dimensional Bioerodable Scaffolds}, booktitle = {Termis Eu-Meeting London (UK) 4-7 September 2007 Tissue Engineering 2007, 13 (7): 1647}, year = {2007}, pages = {{\textendash}}, keywords = {Bioengineering}, author = {G. Forte and CAROTENUTO, F and G. Vozzi and COSSA, P and FIACCAVENTO, R and M. Minieri and F. Pagliari and S. Pagliari and Romano, R. and A. Ahluwalia and E. Traversa and P. Di Nardo} } @conference {filippini2007cda, title = {A Comparative Dependability Analysis of Antagonistic Actuation Arrangements for Enhanced Robotic Safety}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2007}, pages = {4349{\textendash}4354}, abstract = {In this paper we introduce an analysis of dependability of an elementary yet critical component of robotic systems designed to operate in environments shared with humans, i.e. the joint-level actuation system. We consider robot joints that implement the Variable Impedance Actuation (VIA) paradigm. The VIA has been demonstrated to be an effective mean to achieve high performance while constantly keeping injury risks to humans by accidental impacts below a given threshold. The paper describe possible implementations of the VIA concept which use the Antagonistic Actuation (AA) in three different arrangements. This study follows a previously reported paper dealing with safety. Here a detailed comparative dependability and performability analysis in front of possible specific failure modes is conducted, whose results provide additional and useful guidelines for design of safe and dependable actuation systems for physical human-robot interaction. }, keywords = {Robotics}, author = {R. Filippini and S. Sen and G. Tonietti and A. Bicchi} } @article {arz+07ejc, title = {A component-based approach to the design of networked control systems}, journal = {European Journal of Control}, volume = {13}, number = {2{\textendash}3}, year = {2007}, note = {

Invited paper

}, pages = {261-279}, abstract = {

Component-based techniques revolve around composable, reusable software objects that shield the application level software from the details of the hardware and lowlevel software implementation and vice versa. Components provide many benefits that have led to their wide adoption in software and middleware developed for embedded systems: They are well-defined entities that can be replaced without affecting the rest of the systems, they can be developed and tested separately and integrated later, and they are reusable. Clearly such features are important for the design of large-scale complex systems more generally, beyond software architectures. We propose the use of a component approach to address embedded control problems. We outline a general componentbased framework to embedded control and show how it can be instantiated in specific problems that arise in the control over/of sensor networks. Building on the middleware component framework developed under the European project RUNES, we develop a number of control-oriented components necessary for the implementation of control applications and design their integration. The paper provides the overview of the approach, discusses a real life application where the approach has been tested and outlines a number of specific control problems that arise in this application.

}, keywords = {Embedded Control, Robotics}, author = {K -E Arz{\'e}n and A. Bicchi and G. Dini and S. Hailes and K. H. Johansson and J. Lygeros and A. Tzes} } @conference {SSTB-WH07, title = {Integrating Two Haptic devices for Performance Enhancement}, booktitle = {World Haptics Conference 2007}, year = {2007}, pages = {139-144}, abstract = {

This paper deals with a new configuration for a haptic system, which is able to simultaneously replicate independent force/displacement and force/area behaviors of a given material. Being force/area information a relevant additional haptic cue for improving softness discrimination, this system allows to extend the range of materials whose rheology can be carefully mimicked. Moreover, according to the Hertz theory, two objects with different curvature radius having the same force/displacement behavior can respond with different contact area to the same applied force. These behaviors can be effectively replicated by the integrated haptic system here proposed enabling and independent control of force/displacement and force/area. The system is comprised of a commercial device (Delta Haptic Device) serially coupled with a Contact Area Spread Rate (CASR) device. Two specimens of a material and two of another one, all with different curvature radii, were identified and modeled in terms of force/area and force/displacement. These behaviors were successfully tracked by the integrated haptic system here proposed.

}, keywords = {Haptics}, author = {E. P. Scilingo and N. Sgambelluri and G. Tonietti and A. Bicchi} } @conference {VHTZSTRSBPDRL07, title = {An MRI Compatibility Study of a Fabric Sensing Glove for Sensory-Motor Brain Activity Exploration}, booktitle = {The 10th Annual International Workshop on Presence}, year = {2007}, pages = {79-83}, keywords = {Haptics}, author = {N. Vanello and V. Hartwig and M. Tesconi and G. Zupone and N. Sgambelluri and A. Tognetti and E. Ricciardi and E. P. Scilingo and A. Bicchi and P. Pietrini and D. De Rossi and L. Landini}, editor = {Laura Moreno, Starlab Barcelona, S.L.} } @conference {TSCHPAJOcdc06, title = {Cascaded lemma for set-stable systems}, booktitle = {Proc. IEEE Int. Conf. on Decision and Control}, year = {2006}, month = {December}, address = {San Diego, USA}, abstract = {

A previous result about uniform global asymptotic stability (UGAS) of the equilibrium of a cascaded time-varying systems, is here also shown to hold for closed (not necessarily compact) sets composed by set-stable subsystems of a cascade. In view of this result an optimal control allocation approach is discussed.

}, keywords = {Robotics}, author = {J. Tsonnas and A. Chaillet and E. Panteley and T. A. Johansen} } @conference {FTB06, title = {Casting Robotic end-effectors to reach far objects in space and planetary missions}, booktitle = {Proc. of the 9th ESA Workshop on Advanced Space Technologies for Robotics and Automation}, year = {2006}, pages = {28-30}, keywords = {Robotics}, author = {A. Fagiolini and A. Torelli and A. Bicchi} } @article {GreIJSS06, title = {A Geometry-Based Algorithm for the Stability of Planar Switching Systems}, journal = {Int. J. of Systems Science}, volume = {37}, number = {11}, year = {2006}, pages = {747{\textendash}761}, keywords = {Embedded Control, Robotics}, author = {L. Greco and F. Tocchini and M. Innocenti} } @article {1404, title = {GIS tools application for risk assessment of toxic waste buried in seafloor sediments}, journal = {CHEMISTRY IN ECOLOGY}, year = {2006}, pages = {S145{\textendash}S161}, keywords = {Robotics}, issn = {0275-7540}, doi = {10.1080/02757540600670828}, url = {http://dx.medra.org/10.1080/02757540600670828}, author = {A. Caiti and R. Minciardi and M. Palmese and M. Robba and R. Sacile and A. Trucco} } @conference {BBMSS06, title = {Hybrid Modelling and Control of the Common Rail Injection System}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {3927 / 2006}, year = {2006}, pages = {79-92}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, abstract = {

We present an industrial case study in automotive control of significant complexity: the new common rail fuel injection system for Diesel engines, currently under production by Magneti Marelli Powertrain. In this system, a flow-rate valve, introduced before the High Pressure (HP) pump, regulates the fuel flow that supplies the common rail according to the engine operating point. The standard approach followed in automotive control is to use a mean-value model for the plant and to develop a controller based on this model. In this particular case, this approach does not provide a satisfactory solution as the discrete-continuous interactions in the fuel injection system, due to the slow time-varying frequency of the HP pump cycles and the fast sampling frequency of sensing and actuation, play a fundamental role. We present a design approach based on a hybrid model of the Magneti Marelli Powertrain common-rail fuel-injection system for four-cylinder multi-jet engines and a hybrid approach to the design of a rail pressure controller. The hybrid controller is compared with a classical mean-value based approach to automotive control design whereby the quality of the hybrid solution is demonstrated.

}, keywords = {Embedded Control, Robotics}, author = {A. Balluchi and A. Bicchi and E. Mazzi and A. Sangiovanni Vincentelli and G. Serra}, editor = {J. Hespanha and A. Tiwari} } @conference {BMP06-HSCC, title = {Improving efficiency of finite plans by optimal choice of input sets}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {3927 / 2006}, year = {2006}, pages = {108-122}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, abstract = {

Finite plans proved to be an efficient method to steer complex control systems via feedback quantization. Such finite plans can be encoded by finite{\textendash}length words constructed on suitable alphabets, thus permitting transmission on limited capacity channels. In particular flat systems can be steered computing arbitrarily close approximations of a desired equilibrium in polynomial time. The paper investigates how the efficiency of planning is affected by the choice of inputs, and provides some results as to optimal performance in terms of accuracy and range. Efficiency is here measured in terms of computational complexity and description length (in number of bits) of finite plans.

}, keywords = {Embedded Control, Robotics}, author = {A. Bicchi and A. Marigo and B. Piccoli}, editor = {J. Hespanha and A. Tiwari} } @inbook {ISER04, title = {Optimal Mechanical/Control Design for Safe and Fast Robotics}, booktitle = {Experimental Robotics IX: The 9th International Symposium on Experimental Robotics}, series = {Springer Tracts in Advanced Robotics}, volume = {21}, year = {2006}, pages = {311 - 320}, publisher = {Springer Berlin / Heidelberg}, organization = {Springer Berlin / Heidelberg}, abstract = {

The problem to ensure safety of performant robot arms during task execution was previously investigated by authors. The problem can be approached by studying an optimal control policy, the "Safe Brachistocrone", whose solutions are joint impedance trajectories coordinated with desired joint velocities. Transmission stiffness is chosen so as to achieve minimum-time task execution for the robot, while guaranteeing an intrinsic safety level in case of an unexpected collision between a link of the arm and a human operator. In this paper we extend this approach to more general classes of robot actuation systems, whereby other impedance parameters beside stiffness (such as e.g. joint damping and/or plasticity) can vary. We report on a rather extensive experimental campaign validating the proposed approach.

}, keywords = {Physical Human-Robot Interaction (pHRI), Robotics}, author = {G. Tonietti and R. Schiavi and A. Bicchi}, editor = {Marcelo H. Ang, Oussama Khatib} } @inbook {BSSTB06, title = {Optimization and Fail-Safety Analysis of Antagonistic Actuation for pHRI}, booktitle = {European Robotics Symposium 2006}, series = {Springer Tracts in Advanced Robotics}, volume = {22}, year = {2006}, pages = {109 - 118}, publisher = {Springer Berlin / Heidelberg}, organization = {Springer Berlin / Heidelberg}, abstract = {

In this paper we consider some questions in the design of actuators for physical Human-Robot Interaction (pHRI) under strict safety requirements in all circumstances, including unexpected impacts and HW/SW failures. We present the design and optimization of agonistic-antagonistic actuation systems realizing the concept of variable impedance actuation (VIA). With respect to previous results in the literature, in this paper we consider a realistic physical model of antagonistic systems, and include the analysis of the effects of cross-coupling between actuators. We show that antagonistic systems compare well with other possible approaches in terms of the achievable performance while guaranteeing limited risks of impacts. Antagonistic actuation systems however are more complex in both hardware and software than other schemes. Issues are therefore raised, as to fault tolerance and fail safety of different actuation schemes. In this paper, we analyze these issues and show that the antagonistic implementation of the VIA concept fares very well under these regards also.

}, keywords = {Physical Human-Robot Interaction (pHRI), Robotics}, author = {G. Boccadamo and R. Schiavi and S. Sen and G. Tonietti and A. Bicchi}, editor = {H. Christensen} } @conference {PHRI06, title = {Safe and Dependable Physical Human-Robot Interaction in Anthropic Domains: State of the Art and Challenges}, booktitle = {Proc. IROS{\textquoteright}06 Workshop on pHRI - Physical Human-Robot Interaction in Anthropic Domains}, year = {2006}, publisher = {IEEE}, organization = {IEEE}, keywords = {Robotics}, author = {R. Alami and A Albu-Schaeffer and A. Bicchi and R. Bischoff and R. Chatila and A. De Luca and De Santis, A and G. Giralt and J. Guiochet and G. Hirzinger and F. Ingrand and V. Lippiello and R. Mattone and D. Powell and S. Sen and B. Siciliano and G. Tonietti and L. Villani}, editor = {A. Bicchi and A. De Luca} } @inbook {DLMS01, title = {Wearable Mechanosensing and Emerging Technologies in Fabric-based Actuation}, booktitle = {Intelligent Textiles for Personal Protection and Safety}, volume = {3}, year = {2006}, pages = {55-64}, publisher = {IOS Press}, organization = {IOS Press}, edition = { }, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and E. P. Scilingo and A. Tognetti} } @conference {TSB05, title = {Design and Control of a Variable Stiffness Actuator for Safe and Fast Physical Human/Robot Interaction}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2005}, pages = {528-533}, abstract = {

This paper is concerned with the design and control of actuators for machines and robots physically interacting with humans. According to criteria established in our previous work on mechanical-control co-design for intrinsically safe, yet performant machines, we pursue the Variable Impedance Actuation (VIA) approach, purporting actuators that can control in real-time both the reference position and the mechanical impedance of the moving parts in the machine. In this paper we describe an implementation of such concepts, consisting of a novel electromechanical Variable Stiffness Actuation (VSA) motor. The design and the functioning principle of the VSA are reported, along with the analysis of its dynamic behavior. A novel scheme for feedback control of this device is presented, along with experimental results showing performance and safety of a one-link arm actuated by the VSA motor.

}, keywords = {Robotics}, author = {G. Tonietti and R. Schiavi and A. Bicchi} } @inbook {DCLPST05, title = {Electroactive fabrics and wearable man-machine interfaces}, booktitle = {Wearable Electronics and Photonics}, year = {2005}, pages = {59-80}, publisher = {Woodhead Publishing Ltd}, organization = {Woodhead Publishing Ltd}, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and R. Paradiso and E. P. Scilingo and A. Tognetti} } @conference {BBCCCCPT05, title = {From tele-laboratory to e-learning in automation curricula at the university of Pisa}, booktitle = {Proc. IFAC World Congress}, year = {2005}, abstract = {

The design and development of computational infrastructures supporting existing tele-laboratory experiences in the field of automation and robotics are described. The goal of the activity is to provide a proper e-learning environment in which remote laboratory experiences are integrated in a coherent way. The addition of e-learning features, as self-assessment and progress monitoring tools, asynchronous tutor interaction, authentication, evaluation and follow-up features, has led also to the modification of the original tele-laboratory set-up.

}, keywords = {Robotics}, author = {A. Balestrino and A. Bicchi and A. Caiti and V. Calabr{\`o} and T. Cecchini and A. Coppelli and L. Pallottino and G. Tonietti} } @conference {BGGT05, title = {Hybrid Modelling of an Electronically Controlled Limited Slip Differential}, year = {2005}, month = {8-10 September}, keywords = {Embedded Control, Robotics}, author = {A. Bicchi and G. Greco and M. Guiggiani and G. Tonietti} } @article {BCPT03, title = {On-line Robotic Experiments for Tele-Education at the University of Pisa}, journal = {Int. Journal of Robotic Systems}, volume = {22}, number = {4}, year = {2005}, note = {

Special Issue on Internet \& Online Robots for Telemanipulation

}, pages = {217-230}, abstract = {

In this paper we describe work being done at our department to make the Robotics Laboratory accessible to student and colleagues, to execute and watch real-time experiments at any time and from anywhere. We describe few different installations, and highlight the underlying philosophy, wich is aimed at enlarging the lab in all the dimensions of space, time, and available resources, through the use of Internet technologies.

}, keywords = {Robotics}, author = {A. Bicchi and A. Caiti and L. Pallottino and G. Tonietti} } @article {SGPTGD05, title = {Performance evaluation of Sensing Fabrics for Monitoring Physiological and Biomechanical Variables}, journal = {IEEE Transactions on Information Technology in BioMedicine}, volume = {9}, number = {3}, year = {2005}, month = {September}, pages = {345-352}, keywords = {Bioengineering}, author = {E. P. Scilingo and A. Gemignani and R. Paradiso and N. Taccini and B. Ghelarducci and D. De Rossi} } @conference {IARP05, title = {Physical Human-Robot Interaction in Anthropic Domains: Safety and Dependability}, booktitle = {Proc. 4th IARP/IEEE-EURON Workshop on Technical Challenges for Dependable Robots in Human Environments}, year = {2005}, abstract = {

In this paper we describe the motivations and the aim ofthe EURON-2 research project {\textquoteleft}{\textquoteleft}\underline{P}hysical \underline{H}uman-\underline{R}obot \underline{I}nteraction in Anthropic \underline{Dom}ains{\textquoteright}{\textquoteright} (PRHIDOM). This project, which moves along the lines indicated by the 1$^{st}$ IARP/IEEE-RAS Workshop on Technical Challenge for Dependable Robots in Human Environments \cite{iarp01}, is about {\textquoteleft}{\textquoteleft}charting{\textquoteright}{\textquoteright} the new {\textquoteleft}{\textquoteleft}territory{\textquoteright}{\textquoteright} of physical Human-Robot Interaction (pHRI). To ensure these goals, the integration competences in control, robotics, design and realization of mechanical systems, human-machine interaction, and in safety-dependability of mechatronic systems is required. The PHRIDOM Consortium is composed of 5 partners from 3 different European countries.

}, keywords = {Robotics}, author = {A Albu-Schaeffer and A. Bicchi and G. Boccadamo and R. Chatila and A. De Luca and De Santis, A and G. Giralt and G. Hirzinger and V. Lippiello and R. Mattone and R. Schiavi and B. Siciliano and G. Tonietti and L. Villani} } @article {1406, title = {Risk assessment of seafloor waste: acoustical imaging of buried waste}, journal = {JOURNAL OF COMPUTATIONAL ACOUSTICS}, volume = {13}, year = {2005}, pages = {385{\textendash}401}, keywords = {Robotics}, issn = {0218-396X}, doi = {10.1142/S0218396X05002694}, url = {http://dx.medra.org/10.1142/S0218396X05002694}, author = {A. Caiti and M. Palmese and A. Trucco} } @conference {TocCDC05, title = {Stabilization of a Class of Planar Nonlinear Systems}, booktitle = {44th IEEE CDC-ECC{\textquoteright}05}, year = {2005}, month = {December}, address = {Seville, Spain}, keywords = {Robotics}, author = {F. Tocchini and L. Greco and M. Innocenti} } @article {LSTTD05, title = {Strain sensing fabric for hand posture and gesture monitoring}, journal = {IEEE Transactions on Information Technology in BioMedicine}, volume = {9}, number = {3}, year = {2005}, month = {September}, pages = {372-381}, keywords = {Bioengineering}, author = {F. Lorussi and E. P. Scilingo and M. Tesconi and A. Tognetti and D. De Rossi} } @inbook {DLSCTT04, title = {Artificial kinesthetic systems for telerehabilitation}, booktitle = {Wearable eHealth Systems for Personalised Health Management}, year = {2004}, pages = {209-213}, publisher = {IOS Press}, organization = {IOS Press}, keywords = {Bioengineering}, author = {D. De Rossi and F. Lorussi and E. P. Scilingo and Carpi, F and A. Tognetti and Tesconi, M} } @conference {CPTSLDGGBVG-04, title = {Development of a Wearable System Based on Smart Textiles and GPRS Transmission for Remote Multiparametric Monitoring of Cardiac Patients: Preliminary Results of the WEALTHY Project}, booktitle = {THE 5th International Heart Health Conference}, year = {2004}, month = {June}, address = {Milan, Italy}, keywords = {Bioengineering}, author = {S. Coli and R. Paradiso and N. Taccini and E. P. Scilingo and G. Loriga and D. De Rossi and A. Gemignani and B. Ghelarducci and L. Bourdon and A. Ditmar and T. Vavouras and B. Gros and J. Luprano and M. Jaenecke and C. Coucke and G. Delhomme and D. Cianflone} } @article {BT03, title = {Fast and Soft Arm Tactics: Dealing with the Safety-Performance Trade-Off in Robot Arms Design and Control}, journal = {IEEE Robotics and Automation Magazine}, volume = {11}, number = {2}, year = {2004}, note = {

PUBLISHER{\textquoteright}S NOTE: In this paper, there are three errors introduced during production. First, the correct title of the article is Fast and Soft Arm Tactics. Also, on formulae for GSI and HIC in page 23, the acceleration is measured in multiples of the acceleration of gravity (g) [not grams], while time is measured in seconds. Finally, within Figure 1, one should read Compliant Covering, and Mrob = Mrotor + Mlink [instead of Krob = Krotor + Klink]. Please visit http://www.ncsu.edu/IEEE-RAS/RAM/BicchiFigure1.pdf to see the original figure.

}, pages = {22{\textendash}33}, abstract = {

In this paper we discuss the problem of achieving good performance in accuracy and promptness by a robot manipulator under the condition that safety is guaranteed throughout task execution. The particular but basic problem of single-joint actuation is considered in detail. Intuitively, while a rigid and powerful structure of the arm would favour its performance, lightweight compliant structures are more suitable to safe operation. The quantitative analysis of the resulting design trade-off between safety and performance is one of the objectives of our work. Such analysis has a strong impact on how robot mechanisms and controllers should be designed for human-interactive applications. We discuss few different possible concepts for safely actuating joints, and focus our attention on one, the Variable-Stiffness Transmission (VST) approach. Some aspects related to the implementation of the mechanics and control of VST joints are reported.

}, keywords = {Robotics}, author = {A. Bicchi and G. Tonietti} } @article {1755, title = {Meccanismo motoriduttore a rigidezza variabile e rapidamente controllabile}, year = {2004}, address = {Italy}, keywords = {Robotics}, issn = {PI2004A000077}, author = {A. Bicchi and G. Tonietti} } @conference {BBCCPPT04, title = {A Robotic Set-Up with Remote Access for {\textquoteleft}{\textquoteleft}Pick and Place{\textquoteright}{\textquoteright} Operations Under Uncertainty Conditions}, booktitle = {E-learning and Virtual and Remote Laboratories}, series = {Proc. VIRTUAL-LAB 2004}, year = {2004}, pages = {144{\textendash}149}, abstract = {

The work describes on-going work at the University of Pisa on the field of tele-laboratories and distance learning. In particular, the group is working at the evolution of existing tele-laboratory experiments in the field of robotics and control into learning units of a self-consistent didactic project. The pick-and-place system described has been designed to provide the set-up for robot arm motion planning with specific objectives and evaluation tools.

}, keywords = {Robotics}, author = {A. Balestrino and A. Bicchi and A. Caiti and T. Cecchini and L. Pallottino and A. Pisani and G. Tonietti}, editor = {P. Borza and L. Gomes and G. Scutaru} } @conference {BTS04, title = {Safe and Fast Actuators for Machines Interacting with Humans}, booktitle = {Proc. of the 1st Technical Exhibition Based Conference on Robotics and Automation, TExCRA2004, November 18-19, TEPIA, Tokyo, Japan -}, year = {2004}, pages = {(in press)}, abstract = {

This paper describes a new generation of actuators for robotic applications, and more generally for machines that are designed to interact with humans. Such actuators, called Variable Impedance Actuators, are designed to achieve fast motion control while guaranteeing safety of human operators in worst-case impact situation. The fundamental innovation is to implement safety by purely mechanical, passive means, to guarantee intrinsic safety, while active control is used to recover performance. The design concept, which is the subject of a patent application, has led to the experimental implementation of a Variable Stiffness Actuator. The effectiveness of the VSA has been recently validated theoretically and experimentally by authors.

}, keywords = {Robotics}, author = {A. Bicchi and G. Tonietti and R. Schiavi} } @conference {GSLTPD-04, title = {A sensing shirt for monitoring behavioral and autonomic parameters}, booktitle = {55}, year = {2004}, month = {February}, pages = {83}, address = {Innsbruck, Austria}, keywords = {Bioengineering}, author = {A. Gemignani and E. P. Scilingo and G. Loriga and N. Taccini and R. Paradiso and D. De Rossi and B. Ghelarducci} } @conference {GreMED04, title = {Stabilization of a Class of Unstable Switching Systems}, booktitle = {12th IEEE Mediterranean Conference}, year = {2004}, month = {June}, address = {Kusadasi, Turkey}, keywords = {Robotics}, author = {L. Greco and F. Tocchini and M. Innocenti} } @conference {DLSCTTO-04, title = {An Upper Limb Kinesthetic-Like System For Tele-Rehabilitation}, booktitle = {Mediterranean Conference on Medical and Biological Engineering}, year = {2004}, month = {August}, address = {Island of Ischia, Italy}, keywords = {Bioengineering}, author = {D. De Rossi and F. Lorussi and E. P. Scilingo and F. Carpi and M. Tesconi and A. Tognetti and P. Orsini} } @article {LRSTD04, title = {Wearable, Redundant Fabric-Based Sensor Arrays for Reconstruction of Body Segment Posture}, journal = {IEEE Sensors Journal}, volume = {4}, number = {6}, year = {2004}, month = {December}, pages = {807-818}, keywords = {Bioengineering}, author = {F. Lorussi and W. Rocchia and E. P. Scilingo and A. Tognetti and D. De Rossi} } @article {DCLMPS03, title = {Electroactive Fabrics And Wearable Biomonitoring Devices}, journal = {AUTEX Research Journal}, volume = {3}, number = {4}, year = {2003}, month = {December}, pages = {180-185}, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and R. Paradiso and E. P. Scilingo and A. Tognetti} } @booklet {GreTR03, title = {Necessary and Sufficient Conditions for Asymptotic Stability of Second Order LTI Switching Systems}, year = {2003}, publisher = {Dept. of Electrical Systems and Automation, University of Pisa}, keywords = {Robotics}, author = {L. Greco and F. Tocchini and M. Innocenti} } @inbook {BTBP03, title = {Variable Stiffness Actuators for Fast and Safe Motion Control}, booktitle = {Proceedings of the International Symposium on Robotics Research}, series = {Springer Tracts in Advanced Robotics (STAR)}, year = {2003}, publisher = {Springer Verlag}, organization = {Springer Verlag}, abstract = {

In this paper we propose Variable Stiffness actuation as a viable mechanical/control co-design approach for guaranteeing control performance for robot arms that are inherently safe to humans in their environment. A new actuator under development in our Lab is then proposed, which incorporate the possibility to vary transmission stiffness during motion execution, thus allowing substantial motion speed-up while maintaining low injury risk levels.

}, keywords = {Robotics}, author = {A. Bicchi and G. Tonietti and M. Bavaro and M. Piccigallo}, editor = {B. Siciliano and O. Khatib and Groen, F.} } @conference {LSTTD-03, title = {Wearable Sensing Garment For Posture Detection, Rehabilitation And Tele-Medicine}, booktitle = {4th International IEEE EMBS Special Topic Conference on Information Technology Applications in Biomedicine}, year = {2003}, month = {April}, pages = {287-290}, address = {Birmingham,UK}, keywords = {Bioengineering}, author = {F. Lorussi and E. P. Scilingo and M. Tesconi and A. Tognetti and D. De Rossi} } @conference {TCLMOSTD-03, title = {Wearable Sensory-Motor Orthoses for Tele-Rehabilitation}, booktitle = {25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society}, year = {2003}, month = {September}, pages = {3724-3727}, address = {Cancun,Mexico}, keywords = {Bioengineering}, author = {A. Tognetti and F. Carpi and F. Lorussi and A. Mazzoldi and P. Orsini and E. P. Scilingo and M. Tesconi and D. De Rossi} } @conference {TB02, title = {Adaptive Simultaneous Position and Stiffness Control for a Soft Robot Arm}, booktitle = {Proc. IEEE Int. Symp. Intelligent Robots and Systems}, year = {2002}, month = {October}, pages = {1992-1997}, abstract = {

In this paper, an independent joint position and stiffness adaptive control for a robot arm actuated by McKibbenartificial muscles is reported. In particular, {\em muscular} nd {\em dynamic} parameters of the system are supposed unknown. Adaptive control performance is tested in a one degree of freedom experimental setup and compared with PID control performance. The adaptive control scheme is then applied to a robot arm that is conceived to perform tasks in an anthropic environment. The adaptive control developed is such that performance of the robot arm is very similar to this of human arm. Experimental results are reported.

}, keywords = {Robotics}, author = {G. Tonietti and A. Bicchi} } @conference {TB02-IARP, title = {Design, Realization and Control of Soft Robot Arms for Intrinsically Safe Interaction with Humans}, booktitle = {Proc. IARP/RAS Workshop on Technical Challenges for Dependable Robots in Human Environments}, year = {2002}, month = {October}, pages = {79-87}, keywords = {Robotics}, author = {A. Bicchi and G. Tonietti} } @conference {DCLMST-02, title = {Electroactive Fabrics for Distributed, Conformable and Interactive Systems}, booktitle = {The first IEEE International Conference on Sensors}, year = {2002}, month = {June}, pages = {1608-1613}, address = {Orlando, Florida}, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and E. P. Scilingo and A. Tognetti} } @conference {DCLMST-02, title = {Electroactive Fibers and Fabrics for Distributed, Conformable and Interactive Systems}, booktitle = {Proceedings of the First European Workshop on Structural Health Monitoring}, year = {2002}, month = {July}, address = {Cachan, France}, keywords = {Bioengineering}, author = {D. De Rossi and F. Carpi and F. Lorussi and A. Mazzoldi and E. P. Scilingo and A. Tognetti} } @inbook {PLPB02, title = {Optimal control of quantized input systems}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {LNCS 2289}, year = {2002}, pages = {351-363}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, address = {Heidelberg, Germany}, abstract = {

In this paper we consider the problem of optimal control (specifically, minimum-time steering) for systems with quantized inputs. In particular, we propose a new approach to the solution of the optimal control problem for an important class of nonlinear systems, i.e. chained-form systems. By exploiting results on the structure of the reachability set of these systems under quantized control, the optimal solution is determined solving an integer linear programming problem. Our algorithm represents an improvement with respect to classical approaches in terms of exactness, as it does not resort to any a priori state-space discretization. Although the computational complexity of the problem in our formulation is still formally exponential, it lends itself to application of Branch and Bound techniques, which substantially cuts down computations in many cases, as it has been experimentally observed.

}, keywords = {Embedded Control, Robotics}, author = {S. Pancanti and L. Leonardi and L. Pallottino and A. Bicchi}, editor = {C. Tomlin and M. Greenstreet} } @inbook {PPSEB02, title = {Synthesis of robust control systems under resource constraints}, booktitle = {Hybrid Systems: Computation and Control}, series = {Lecture Notes in Computer Science}, volume = {LNCS 2289}, year = {2002}, pages = {337-350}, publisher = {Springer-Verlag}, organization = {Springer-Verlag}, address = {Heidelberg, Germany}, keywords = {Embedded Control, Robotics}, author = {L. Palopoli and C. Pinello and A. L. Sangiovanni-Vincentelli and L. El-Ghaoui and A. Bicchi}, editor = {M. Greenstreet and C. Tomlin} } @conference {BCQRTB01, title = {Breaking the Lab{\textquoteright}s Walls: Tele-Laboratories at the University of Pisa}, booktitle = {Proc. IEEE Int. Conf. on Robotics and Automation}, year = {2001}, pages = {1903-1908}, address = {Seoul, Korea}, keywords = {Telelab}, author = {A. Bicchi and A. Coppelli and F. Quarto and L. Rizzo and F. Turchi and A. Balestrino} } @conference {BLT01, title = {Compliant design for intrinsic safety: general issues and preliminary design}, booktitle = {Proc. IEEE Int. Symp. Intelligent Robots and Systems}, year = {2001}, month = {October}, pages = {1864-1869}, address = {Maui, Hawaii}, abstract = {

In this paper, we describe some initial results of a project aiming at development of a programmable-compliance, inherently safe robot arm for applications in anthropic environmnets. In order to obtain safety in spite of worst-case situations (such as unexpected delays in teleoperation, or even controller failure), we will consider achieving compliance by mechanical rather than by control design. We first describe some of the control problems that the presence of large, possibly unknown mechanical compliance typically introduces, and present a result that shows the possibility to cope with these uncertainties in an adaptive way. In the second part of the paper we describe the initial development of a new prototype arm under construction in our laboratory. The arm is designed to achieve arbitrary position tracking in 3D with controlled effective compliance at the joints.

}, keywords = {Physical Human-Robot Interaction (pHRI), Robot Arms}, author = {A. Bicchi and S. Lodi Rizzini and G. Tonietti} } @conference {BLT01-iarp, title = {Compliant robot arm design for intrinsic safety}, booktitle = {Proc. IARP/RAS Workshop on Technical Challenges for Dependable Robots in Human Environments}, year = {2001}, pages = {100-106}, abstract = {In this paper, we describe some initial results of a project aiming at development of a programmable-compliance, inherently safe robot arm for applications in anthropic environmnets. In order to obtain safety in spite of worst-case situations (such as unexpected delays in teleoperation, or even controller failure), we will consider achieving compliance by mechanical rather than by control design. We first describe some of the control problems that the presence of large, possibly unknown mechanical compliance typically introduces, and present a result that shows the possibility to cope with these uncertainties in an adaptive way. In the second part of the paper we describe the initial development of a new prototype arm under construction in our laboratory. The arm is designed to achieve arbitrary position tracking in 3D with controlled effective compliance at the joints.}, keywords = {Physical Human-Robot Interaction (pHRI), Robot Arms}, author = {A. Bicchi and S. Lodi Rizzini and G. Tonietti}, editor = {G. Giralt and P. Corke} } @inbook {B99, title = {An experimental study of performance and fault tolerance of a hybrid free-flight control scheme}, booktitle = {Robustness in Identification and Control}, series = {LNCIS 245}, year = {1999}, pages = {449-463}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Berlin Heidelberg, Germany}, keywords = {Embedded Control, Robotics}, author = {A. Bicchi}, editor = {A. Garulli and A. Tesi and A. Vicino} } @conference {BMPPPTS98, title = {Decentralized Air Traffic Management Systems: Performance and Fault Tolerance}, booktitle = {Proc. IFAC Workshop on Motion Control}, year = {1998}, keywords = {Air Traffic Management Systems, Autonomous Vehicles, Hybrid and Embedded Control Systems, Nonlinear Control Systems}, author = {A. Bicchi and A. Marigo and G. Pappas and M. Pardini and G. Parlangeli and C. Tomlin and S. Sastry} } @inbook {BP97, title = {On some structural properties of general manipulation systems}, booktitle = {Modelling and Control of Mechanichal Systems}, year = {1997}, pages = {187-202}, publisher = {Imperial College Press}, organization = {Imperial College Press}, address = {London, U.K.}, keywords = {Haptics, Robotics}, author = {A. Bicchi and D Prattichizzo}, editor = {A. Astolfi and D. J. N. Limebeer and C. Melchiorri and A. Tornamb\èe and R.B. Vinter} } @inbook {CMPB96, title = {Reachability of Rolling Parts}, booktitle = {Advances in Robotics: The ERNET Perspective}, year = {1996}, pages = {51-60}, publisher = {World Scientific Publisher Corp.}, organization = {World Scientific Publisher Corp.}, address = {Singapore}, keywords = {Haptics, Robotics}, author = {Y. Chitour and A. Marigo and D Prattichizzo and A. Bicchi}, editor = {C. Bonivento and C. Melchiorri and H. Tolle} } @article {1418, title = {BEAMFORMING ON SEISMIC INTERFACE WAVES WITH AN ARRAY OF GEOPHONES ON THE SHALLOW SEA-FLOOR}, journal = {IEEE JOURNAL OF OCEANIC ENGINEERING}, volume = {20}, year = {1995}, pages = {300{\textendash}310}, issn = {0364-9059}, doi = {10.1109/48.468245}, url = {http://dx.medra.org/10.1109/48.468245}, author = {J. A. Tencate and T. G. Muir and A. Caiti and A. Kristensen and J. F. Manning and J. A. Shooter and R. A. Koch and E. Michelozzi} } @inbook {BP93, title = {New Issues in the Kineto-Statics, Dynamics, and Control of Whole-Hand Manipulation}, booktitle = {Robotics, Mechatronics and Manufacturing Systems}, year = {1993}, pages = {373-3790}, publisher = {North Holland}, organization = {North Holland}, address = {Amsterdam}, keywords = {Haptics, Robotics}, author = {A. Bicchi and D Prattichizzo}, editor = {T. Takamori and K. Tsuchiya} } @inbook {BM92, title = {Quasi-Static Compensation of Force Errors for Flexible Manipulators}, booktitle = {Selected papers from the Third IFAC/IFIS/IMAC Symposium on Robot Control}, year = {1992}, pages = {381-385}, publisher = {Pergamon Press Books}, organization = {Pergamon Press Books}, address = {Oxford, U.K.}, keywords = {Robotics}, author = {A. Bicchi and C. Melchiorri}, editor = {I. Troch and K. Desoer and P. Kopacek} } @inbook {BB91, title = {Robotic Tactile Sensing: Skin-like and Intrinsic Approach}, booktitle = {Intelligent Robotic Systems: Analysis, Design and Programming}, year = {1991}, publisher = {Marcel Dekker}, organization = {Marcel Dekker}, address = {New York, NY, USA}, keywords = {Haptics, Robotics}, author = {A. Bicchi and G. Buttazzo}, editor = {S. Tzafestas} } @inbook {BDBB90, title = {Multi Sensor Integration for Fine Manipulation}, booktitle = {Highly Redundant Sensing in Robotic Systems}, series = {NATO-ASI Series F: Computer and Systems Sciences, vol. 58}, volume = {58}, number = {NATO ASI Series}, year = {1990}, pages = {55-66}, publisher = {Springer Verlag}, organization = {Springer Verlag}, address = {Berlin Heidelberg, Germany}, keywords = {Haptics, Robotics}, author = {M. Bergamasco and P. Dario and A. Bicchi and G. Buttazzo}, editor = {J. T. Tou and J. G. Balchen} } @conference {VBT90, title = {Sensorial Integration for a Robotic Dextrous Hand}, booktitle = {Proc. Int. Symp. on Measurement and Control in Robotics}, year = {1990}, address = {Houston, Texas, USA}, keywords = {Haptics, Robot Hands, Sensors}, author = {G. Vassura and A. Bicchi and A. Tonielli} } @article {1740, title = {Prosthetic vascular graft monitoring by ultrasound using piezoelectric polymers (PZP)}, journal = {TRANSACTIONS - AMERICAN SOCIETY FOR ARTIFICIAL INTERNAL ORGANS}, volume = {30}, year = {1984}, pages = {{\textendash}}, keywords = {Bioengineering}, issn = {0066-0078}, author = {P. Dario and P.D. Richardson and M. Bertoncini and D. De Rossi and L.A. Trudell and P.M. Galletti} } @article {1745, title = {PVF2 Catheter-tip transducers for pressure, sound and flow measurement}, journal = {FERROELECTRICS}, volume = {60}, year = {1984}, pages = {149{\textendash}162}, keywords = {Bioengineering}, issn = {0015-0193}, author = {P. Dario and D. De Rossi and R. Bedini and R. Francesconi and M.G. Tivella} }